Spoon Sports S-Tai Front Bumper Honda S2000 AP1 AP2 00-09

Since 1999, we at Spoon have been participating in S2000 motorsports, mainly in endurance races. Naturally, when it comes to long distances, speed and good fuel efficiency are important points for race operation. Two years after development began, a true aero was completed after repeated practice and testing. It features a uni-design that provides the aerodynamics that are truly required on the circuit, rectifying the flow while also supplying fresh air to areas that require cooling.

---

Notes & special notes

Brake duct diameter 75Φ can be used.
From April 2014, fog lights have been changed from CIBIE to IPF.
Valve standard H11-12V 55W White

(Note) Wax is used in the product manufacturing process, so please be sure to degrease before painting.
Then roughen the surface with #800 waterproof paper.
Also, there may be small pinholes, scratches, cracks, etc. on the surface, but if you prepare the surface with polyester putty/surfacer, it will be finished beautifully.

-Be sure to temporarily align the product before painting.
・The product may deform in environments such as paint booths/heaters, so please let it dry naturally without applying heat.
・When the temperature is low such as in winter or when the humidity is high, please dry the entire product at a temperature below 40℃.
・Please do not heat partially. This may cause distortion.