SpeedFactory Titanium Engine Mount Hardware 3pc Kit Honda EG/EK/DC K-Swap Mounts

Drop weight & look greatwith our all-new Titanium Engine Mount To Chassis Hardware Kits!

These M12 flange bolt kits feature our ultralight, hollow-domed 6-point design and will replace the 17mm head bolts that secure the engine mounts to the chassis.

As with all SpeedFactory Racing titanium products, these are manufactured using Ti-6AL-4V Titanium featuring high strength, low weight, and superior corrosion resistance - these will not corrode like your stock steel bolts! 

Each B / D-Series kit includes:

(1) M12 x 1.25 x 115mm 6-point Titanium Bolt (Timing Belt Mount)
(2) M12 x 1.25 x 103mm 6-point Titanium Bolts (Rear T-Bracket, Upper Trans Mount)
(3) M12 Titanium Washers
(3) M12 x 1.25 Titanium Flange Nuts

Each K-Swap kit includes:

(2) M12 x 1.25 x 115mm 6-point Titanium Bolts (Timing Cover Mount, Upper Trans Mount)
(1) M12 x 1.25 x 103mm 6-point Titanium Bolt (Rear T-Bracket)
(3) M12 Titanium Washers
(3) M12 x 1.25 Titanium Flange Nuts

NOTE: Not all applications will require the use of all the included nuts, as some have factory welded nuts on the chassis bracket. 

Available in natural raw or burnt finishes.

Confirmed Fitments:

EG / DC chassis

EK chassis with aftermarket mount kit

EG / DC / EK with K-Swap mount kit

May fit other Honda / Acura applications.