{"title":"Radium Engineering","description":null,"products":[{"product_id":"radium-engineering-catch-can-kit-fluid-lock-bmw-135i-335i-535i-n54","title":"Radium Engineering Catch Can Kit Fluid Lock BMW 135i 335i 535i N54","description":"Radium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick. This oil catch can kit is compatible with all BMW 135i, 335i, and 535i models with the 3.0L twin turbo N54 engine. Review the installation instruction link above before ordering.\u003cbr\u003e\u003cbr\u003eAn oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by accumulated from aggressive driving. Excess oil saturated air circulating back into the air intake stream can lead to degraded performance.\u003cbr\u003e \u003cbr\u003eRadium Engineering's closed loop system does NOT vent to atmosphere (VTA), thus is emissions and track legal. Instead, clean filtered air routes back in through the engine to be burned and to promote negative crankcase pressure for optimal performance.\u003cbr\u003eFurthermore, a closed system prevents unwanted oil vapors entering into the cabin. \u003cbr\u003e\u003cbr\u003eThe kit secures to the OEM power steering reservoir mount with no cutting or drilling required.\u003cbr\u003e\u003cbr\u003eAs shown below, this kit includes N54 specific billet 10AN adapter fittings eliminating the need to modify the OEM vent tubing.\u003cbr\u003eIncludes\u003cbr\u003e-Aluminum oil catch can with integrated dipstick\u003cbr\u003e-Aluminum laser cut BMW specific mounting bracket\u003cbr\u003e-Aluminum 10AN BMW specific PCV adapter fittings \u003cbr\u003e-Aluminum 10AN hose ends and adapter fittings\u003cbr\u003e-Enough 10AN PCV hose to work with modified vehicles\u003cbr\u003e-Stainless Mounting hardware\u003cbr\u003e\u003cbr\u003eFeatures\u003cbr\u003e-Effectively raises the octane and increased engine performance from cleaner inlet air\u003cbr\u003e-Prevents oil buildup in the intake or intercooler system walls, throttle body, intake manifold, etc.\u003cbr\u003e-Excessive oil collection can be an indicator of a damaged engine.\u003cbr\u003e-Lowers hydrocarbon emissions\u003cbr\u003e-Capacity: 7 fluid ounces\u003cbr\u003e-Height (without fittings): 5 inches\u003cbr\u003e-Outside Diameter: 2.45 inches\u003cbr\u003e\u003cbr\u003eThe stainless steel filtration media is cleanable and reuseable","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62759865844042,"sku":"RDE-20-0373-FL","price":296.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/prod_pic-3552_d289084d-d197-4483-8b79-40bd9f830438.jpg?v=1784425159"},{"product_id":"radium-engineering-catch-can-kit-fluid-lock-bmw-e46-3-series","title":"Radium Engineering Catch Can Kit Fluid Lock BMW E46 3-Series","description":"Radium Engineering's closed loop system does NOT vent to atmosphere (VTA), thus is emissions and track legal. Instead, clean filtered air routes back in through the engine to be burned and to promote negative crankcase pressure for optimal performance.\u003cbr\u003eFurthermore, a closed system prevents unwanted oil vapors entering into the cabin. This kit mounts in the RH side of the engine thus, it is not compatible with RHD BMW models.\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY\u003cbr\u003e98-06 BMW E46 320i (LHD only)\u003cbr\u003e98-00 BMW E46 323i (LHD only)\u003cbr\u003e01-06 BMW E46 325i (LHD only)\u003cbr\u003e98-00 BMW E46 328i (LHD only)\u003cbr\u003e00-06 BMW E46 330i (LHD only)\u003cbr\u003e03-06 BMW E46 330i ZHP (LHD only)\u003cbr\u003e\u003cbr\u003eIncludes\u003cbr\u003e-Billet aluminum oil catch can with integrated dipstick\u003cbr\u003e-Laser cut anodized E46 specific mounting bracket\u003cbr\u003e-Anodized aluminum 10AN hose ends and adapter fittings\u003cbr\u003e-Enough 10AN (5\/8\") PCV hose to work with modified vehicles\u003cbr\u003e-Mounting hardware and hose clamps\u003cbr\u003e\u003cbr\u003eFeatures\u003cbr\u003e-Effectively raises the octane and increased engine performance from cleaner inlet air\u003cbr\u003e-Prevents oil buildup in the intake or intercooler system walls, throttle body, intake manifold, etc.\u003cbr\u003e-Excessive oil collection can be an indicator of a damaged engine.\u003cbr\u003e-Lowers hydrocarbon emissions\u003cbr\u003e-Capacity: 7 fluid ounces\u003cbr\u003e-Height (without fittings): 5 inches\u003cbr\u003e-Outside Diameter: 2.45 inches\u003cbr\u003e\u003cbr\u003eThe stainless steel filtration media is cleanable and reuseable","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62763229512010,"sku":"RDE-20-0873-FL","price":329.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0073.jpg?v=1784490717"},{"product_id":"radium-engineering-fuel-pump-install-kit-bmw-e46-m3-01-06-pump-not-included","title":"Radium Engineering Fuel Pump Install Kit BMW E46 M3 01-06 - Pump Not Included","description":"For those looking to increase the power output of their BMW, this plug and play (bolt-in) fuel pump replacement solution uses the most popular high performance fuel pumps on the market. No permanent modifications to the fuel system are required for installation of this product.\u003cbr\u003e\u003cbr\u003eThis item allows the installation of an aftermarket fuel pump into the stock BMW fuel pump hanger. Pump not included.\u003cbr\u003eE46 BMW M3\u003cbr\u003eE36 BMW M3 (OBDII Only)\u003cbr\u003eE36 BMW 3-Series (OBDII Only)\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThis kit features a 6061-T6 CNC billet aluminum sleeve that slides over the corresponding 39mm aftermarket pump to mimic the larger diameter of the BMW fuel pump. The machined rib snaps into the fuel pump hanger and properly locates the filter sock. \u003cbr\u003e\u003cbr\u003e-Walbro GSS341 255LPH Fuel Pump\u003cbr\u003e-Walbro GSS342 255LPH Fuel Pump\u003cbr\u003e-Walbro F9000262 Gas Fuel Pump\u003cbr\u003e-Walbro F9000267 E85 Fuel Pump\u003cbr\u003e-Walbro F9000273 Gas Fuel Pump\u003cbr\u003e-Walbro F9000274 E85 Fuel Pump\u003cbr\u003e-AEM 50-1000 Gas Fuel Pump\u003cbr\u003e-AEM 50-1200 E85 Fuel Pump\u003cbr\u003e-Aeromotive 340R 11141 Fuel Pump\u003cbr\u003e-Aeromotive 340R 11142 Fuel Pump\u003cbr\u003e-Deatschwerks 9-301-1000 Fuel Pump\u003cbr\u003e\u003cbr\u003eThe sleeve is designed for 39mm diameter (or DCSS 39\/50) pump bodies. For pumps not listed above, measure the outside diameter to ensure it is correct before ordering. If the pump is greater or less than 39mm, this sleeve may not work.\u003cbr\u003eNOTES\u003cbr\u003e1. For compatible fuel pump filter socks, click HERE.\u003cbr\u003e2. For compatible fuel pump connectors harnesses, click HERE.\u003cbr\u003e3. The Walbro F90000262\/273 pump has the same connectors as the OEM BMW pump.\u003cbr\u003e4. Aftermarket pumps can potentially draw more current than what the BMW wiring was designed for. Fortunately, the factory 15A fuel pump fuse provides a safety net. It is a tell-tale to upgrade the corresponding wiring if this fuse ever blows.","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62763877597514,"sku":"RDE-20-0884","price":65.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0884.jpg?v=1784494507"},{"product_id":"radium-engineering-fuel-pressure-regulator-and-fuel-filter-kit-with-stainless-filter-01-06-bmw-e46-m3","title":"Radium Engineering Fuel Pressure Regulator and Fuel Filter Kit With Stainless Filter 01-06 BMW E46 M3","description":"Radium Engineering fuel pressure regulator (FPR) and fuel filter is a bolt-in kit designed specifically for the 2001-2006 BMW (E46) M3 using factory fuel lines. \u003cbr\u003e\u003cbr\u003eThe OEM fuel filter is replaced with a high-flow Radium Engineering fuel filter. The filter is compatible with all fuel types. For information on Radium Engineering fuel filters\u003cbr\u003eThe OEM FPR is replaced with an RA-Series FPR. The RA-series regulators feature the first wrench-free pressure adjustment. A jam nut and set screw are no longer required. With a simple turn of the knob, pressure will be increased or decreased. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eTo aid in adjusting pressure, there are incremental detents that provide haptic feedback to the user. Every detent permits 1psi (+\/-0.5psi) of adjustment depending on current fuel pressure.\u003cbr\u003e\u003cbr\u003eThe RA-series regulators feature a 360 degree swiveling vacuum reference port that is double O-ring sealed. This is the first in the industry. It permits the installer to quickly point the vacuum fitting in any direction with no tools required.\u003cbr\u003e\u003cbr\u003eThere are 4 interchangeable 10-32 threaded vacuum port fittings provided to cover all scenarios. \u003cbr\u003e1. Barbed Fitting: A black zinc-plated 3\/16\" (5mm) barb machined from high strength steel that is compatible with the following vacuum hoses: 5\/32\" (4mm), 3\/16\" (5mm), and 7\/32\" (6mm).\u003cbr\u003e2. 3AN Male Fitting: A black zinc-plated adapter machined from high strength steel that is compatible with 3AN hose ends.\u003cbr\u003e3. Push-To-Connect: A nickel-plated brass fitting with Buna-N O-rings that is compatible with hard plastic 1\/4\" OD tubing.\u003cbr\u003e4. Vacuum Plug: A black oxide stainless steel screw that is used to maintain a constant (non dynamic) fuel pressure. \u003cbr\u003e\u003cbr\u003eThis kit is suitable with all gasoline types including unleaded, leaded, oxygenated, and pre-mixes. Furthermore, it is compatible with alcohol blends of fuel including methanol, ethanol, and E85.","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62763879235914,"sku":"RDE-20-0932-03","price":362.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/radbmw.jpg?v=1784494533"},{"product_id":"radium-engineering-fuel-surge-tank-install-kit-bmw-e46-excl-convertible","title":"Radium Engineering Fuel Surge Tank Install Kit For BMW E46 Excl Convertible","description":"Radium Engineering Bolt-in installation in trunk area of E46 BMW 3series Excludes Convirtable . Prevents fuel starvation issues during aggressive driving. Surge tank sold separately\u003cbr\u003e\u003cbr\u003eThis comprehensive installation kit includes everything needed to install a Radium fuel surge tank. The base price is for the installation kit ONLY. The fuel surge tank (FST) is sold separately. It can be purchased HERE.\u003cbr\u003e\u003cbr\u003eThe BMW install kit locates the FST in a collision-safe area of the trunk behind the rear seat. The bolt-on aluminum mounting bracket features rubber isolating grommets to reduce fuel pump noise. Also included is a weatherproof fuse and relay to drive the new FST fuel pump. A Delphi weatherpak connector is also provided for the fuel pump trigger activation to make the entire system modular.\u003cbr\u003e\u003cbr\u003eThe PTFE hoses mate at a junction point in the trunk using the bulkead plate and 4 bulkheads fittings (shown above) for interior aesthetics. \u003cbr\u003e\u003cbr\u003eINCLUDES\u003cbr\u003e\u003cbr\u003e-Preassembled 3\/8\" PTFE Hoses \u003cbr\u003e-Aluminum Mounting Bracket with Vibration Isolators\u003cbr\u003e-AN Bulkhead and Adapter Fittings\u003cbr\u003e-Stainless Steel Hardware  \u003cbr\u003e-40 amp Relay and 25 amp Fuse\u003cbr\u003e-Anodized Aluminum Bulkhead Plate","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62763879268682,"sku":"RDE-20-0974","price":515.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0374.jpg?v=1784494534"},{"product_id":"radium-engineering-fuel-pump-install-kit-bmw-e46-excluding-m3-pump-not-included","title":"Radium Engineering Fuel Pump Install Kit BMW E46 (excluding M3) - Pump Not Included","description":"For those looking to increase the power output of their BMW, this plug and play (bolt-in) fuel pump replacement solution uses the most popular high performance fuel pumps on the market. No permanent modifications to the fuel system are required for installation of this product.\u003cbr\u003e\u003cbr\u003eKit to install an aftermarket fuel pump into the BMW E46 (non-M3). No pump included. User must supply their own pump.\u003cbr\u003eE46 BMW 323i\u003cbr\u003eE46 BMW 325i\u003cbr\u003eE46 BMW 328i\u003cbr\u003eE46 BMW 330i\u003cbr\u003e\u003cbr\u003eThis kit features a 6061-T6 CNC billet aluminum sleeve that slides over the corresponding 39mm aftermarket pump to mimic the larger diameter of the BMW fuel pump. The machined rib snaps into the fuel pump hanger and properly locates the filter sock. \u003cbr\u003e\u003cbr\u003e-Walbro GSS341 255LPH Fuel Pump\u003cbr\u003e-Walbro GSS342 255LPH Fuel Pump\u003cbr\u003e-Walbro F9000262 Gas Fuel Pump\u003cbr\u003e-Walbro F9000267 E85 Fuel Pump\u003cbr\u003e-Walbro F9000273 Gas Fuel Pump\u003cbr\u003e-Walbro F9000274 E85 Fuel Pump\u003cbr\u003e-AEM 50-1000 Gas Fuel Pump\u003cbr\u003e-AEM 50-1200 E85 Fuel Pump\u003cbr\u003e-Aeromotive 340R 11141 Fuel Pump\u003cbr\u003e-Aeromotive 340R 11142 Fuel Pump\u003cbr\u003e-Deatschwerks 9-301-1000 Fuel Pump\u003cbr\u003e\u003cbr\u003eThe sleeve is designed for 39mm diameter (or DCSS 39\/50) pump bodies. For pumps not listed above, measure the outside diameter to ensure it is correct before ordering. If the pump is greater or less than 39mm, this sleeve may not work.\u003cbr\u003eNOTES\u003cbr\u003e1. For compatible fuel pump filter socks, click HERE.\u003cbr\u003e2. For compatible fuel pump connectors harnesses, click HERE.\u003cbr\u003e3. The Walbro F90000262\/273 pump has the same connectors as the OEM BMW pump.\u003cbr\u003e4. Aftermarket pumps can potentially draw more current than what the BMW wiring was designed for. Fortunately, the factory 15A fuel pump fuse provides a safety net. It is a tell-tale to upgrade the corresponding wiring if this fuse ever blows.","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62763879301450,"sku":"RDE-20-0894","price":65.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0894.jpg?v=1784494534"},{"product_id":"radium-engineering-fuel-rail-kit-no-hose-or-fittings-bmw-e46-m3-s54","title":"Radium Engineering Fuel Rail Kit - No Hose or Fittings BMW E46 M3 S54","description":"Radium Engineering fuel rail for the BMW S54 engine is machined and anodized for a compatibility with all fuel types including E85. Manufactured with a large internal bore, the fuel rail can support all necessary engine power requirements. It is compatible with OEM and aftermarket direct fitment fuel injectors. It features a large 0.65\" internal bore with -8AN ORB (3\/4-16 O-ring) threaded ports at each end and a 3\/8 NPT female center port to accept a variety of adapter fittings for custom high-flow fuel system builds. The fuel rail is a direct bolt-on for all BMW's equipped with the S54 engine, including:\u003cbr\u003e\u003cbr\u003e2001-2006 BMW M3\u003cbr\u003e2001-2002 BMW Z3 M Coupe\u003cbr\u003e2001-2002 BMW Z3 M Roadster\u003cbr\u003e2006-2008 BMW Z4 M Coupe\u003cbr\u003e2006-2008 BMW Z4 M Roadster\u003cbr\u003e\u003cbr\u003eAppropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers.\u003cbr\u003e\u003cbr\u003eFUEL INJECTOR COMPATIBILITY\u003cbr\u003eThis fuel rail is compatible with factory or OEM equivalent fuel injectors. If upgrading fuel injectors, consult your aftermarket injector supplier for details. Radium Engineering cannot specify any further injector dimensions other than stating ‘OEM equivalent’.\u003cbr\u003e\u003cbr\u003eINCLUDED \u003cbr\u003e\u003cbr\u003e20-0070-02 Fuel Rail, BMW S54\u003cbr\u003e\u003cbr\u003eThis option is the fuel rail ONLY. No fittings or hoses are included. This is ideal when plumbing a custom high flow fuel system using an aftermarket regulator and custom fuel lines. Fittings and adapters are available separately. \u003cbr\u003e\u003cbr\u003eOPTIONAL\u003cbr\u003e\u003cbr\u003e20-0070-PK Fuel Rail Plumbing, BMW S54\u003cbr\u003eThe plumbing kits contains the items in the image below, and allows easy hookup with the factory feed line and regulator located under the car. This kit is only compatible with the E46 M3. E85 compatible.\u003cbr\u003e-1x  8AN ORB plug\u003cbr\u003e-1x  3\/8\" NPT plug\u003cbr\u003e-1x  6AN male adapter\u003cbr\u003e-1x  PTFE fuel feed hose\u003cbr\u003e-1x  SAE adapter to attach to factory regulator","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62763879334218,"sku":"RDE-20-0070-02","price":219.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0070-02.jpg?v=1784494535"},{"product_id":"radium-engineering-fuel-pressure-regulator-and-fuel-filter-kit-with-microglass-filter-01-06-bmw-e46-m3","title":"Radium Engineering Fuel Pressure Regulator and Fuel Filter Kit With Microglass Filter 01-06 BMW E46 M3","description":"Radium Engineering fuel pressure regulator (FPR) and fuel filter is a bolt-in kit designed specifically for the 2001-2006 BMW (E46) M3 using factory fuel lines. \u003cbr\u003e\u003cbr\u003eThe OEM fuel filter is replaced with a high-flow Radium Engineering fuel filter. The filter is compatible with all fuel types. For information on Radium Engineering fuel filters\u003cbr\u003eThis fuel pressure regulator (FPR) and fuel filter is a bolt-in kit designed specifically for the 2001-2006 BMW (E46) M3 using factory fuel lines. The OEM fuel filter is replaced with a high-flow Radium Engineering fuel filter. The filter is compatible with all fuel types. For information on Radium Engineering fuel filters\u003cbr\u003e\u003cbr\u003eThe OEM FPR is replaced with an RA-Series FPR. The RA-series regulators feature the first tool-less pressure adjustment. A jam nut and set screw are no longer required. With a simple turn of the knob, pressure will be increased or decreased. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eTo aid in adjusting pressure, there are incremental detents that provide haptic feedback to the user. Every detent permits 1psi (+\/-0.5psi) of adjustment depending on current fuel pressure.\u003cbr\u003e\u003cbr\u003eThe RA-series regulators feature a 360 degree swiveling vacuum reference port that is double O-ring sealed. This is the first in the industry. It permits the installer to quickly point the vacuum fitting in any direction with no tools required.\u003cbr\u003e\u003cbr\u003eThere are 4 interchangeable 10-32 threaded vacuum port fittings provided to cover all scenarios. \u003cbr\u003e1. Barbed Fitting: A black zinc-plated 3\/16\" (5mm) barb machined from high strength steel that is compatible with the following vacuum hoses: 5\/32\" (4mm), 3\/16\" (5mm), and 7\/32\" (6mm).\u003cbr\u003e2. 3AN Male Fitting: A black zinc-plated adapter machined from high strength steel that is compatible with 3AN hose ends.\u003cbr\u003e3. Push-To-Connect: A nickel-plated brass fitting with Buna-N O-rings that is compatible with hard plastic 1\/4\" OD tubing.\u003cbr\u003e4. Vacuum Plug: A black oxide stainless steel screw that is used to maintain a constant (non dynamic) fuel pressure. \u003cbr\u003e\u003cbr\u003eThis kit is suitable with all gasoline types including unleaded, leaded, oxygenated, and pre-mixes. Furthermore, it is compatible with alcohol blends of fuel including methanol, ethanol, and E85.","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62763879366986,"sku":"RDE-20-0932-05","price":340.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0932_340d26ad-41d1-4ac4-ac33-755f0e5116f4.jpg?v=1784494536"},{"product_id":"radium-engineering-catch-can-kit-fluid-lock-bmw-e46-m3","title":"Radium Engineering Catch Can Kit Fluid Lock BMW E46 M3","description":"Radium Engineering's closed loop system does NOT vent to atmosphere (VTA), thus is emissions and track legal. Instead, clean filtered air routes back in through the engine to be burned and to promote negative crankcase pressure for optimal performance.\u003cbr\u003eFurthermore, a closed system prevents unwanted oil vapors entering into the cabin. This kit mounts in the RH side of the engine thus, it is not compatible with RHD BMW models.\u003cbr\u003e\u003cbr\u003eIncludes\u003cbr\u003e-Billet aluminum oil catch can with integrated dipstick\u003cbr\u003e-Laser cut anodized E46 specific mounting bracket\u003cbr\u003e-Anodized aluminum 10AN hose ends and adapter fittings\u003cbr\u003e-Enough 10AN (5\/8\") PCV hose to work with modified vehicles\u003cbr\u003e-Mounting hardware and hose clamps\u003cbr\u003e\u003cbr\u003eFeatures\u003cbr\u003e-Effectively raises the octane and increased engine performance from cleaner inlet air\u003cbr\u003e-Prevents oil buildup in the intake or intercooler system walls, throttle body, intake manifold, etc.\u003cbr\u003e-Excessive oil collection can be an indicator of a damaged engine.\u003cbr\u003e-Lowers hydrocarbon emissions\u003cbr\u003e-Capacity: 7 fluid ounces\u003cbr\u003e-Height (without fittings): 5 inches\u003cbr\u003e-Outside Diameter: 2.45 inches\u003cbr\u003e\u003cbr\u003eThe stainless steel filtration media is cleanable and reuseable","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62763879399754,"sku":"RDE-20-0073-FL","price":296.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0073_89cd21fb-697e-4f31-bb79-3d998c89efeb.jpg?v=1784494537"},{"product_id":"radium-engineering-port-injection-kit-ford-focus-st-13-focus-rs-16","title":"Radium Engineering Port Injection Kit For Ford Focus ST 13+ Focus RS 16+","description":"Radium Engineering Ford Port Injection Kit (PIK) installs between the intake manifold and the cylinder head and permits the use of port injectors to add additional fuel for high-horsepower Ford EcoBoost engines. This kit does NOT replace the OEM direction injection system. It includes the PIK adapter plate, custom fuel rail, fuel rail mounting hardware, and OEM Ford gaskets, as shown in the below picture. Stainless steel dowels are pressed into the adapter plate to make alignment during installation easier. It is compatible with all fuel types including popular alcohol mixtures such as E85.\u003cbr\u003e\u003cbr\u003eThe 6061 CNC machined aluminum adapter features a smoothed port divider promoting laminar flow into the combustion chambers. The injector spray pattern is divided evenly into each runner.\u003cbr\u003e\u003cbr\u003eThe fuel rail features a large 0.69\" internal diameter bore. It is CNC machined from extruded 6063 aluminum and laser etched for a high quality surface finish. All 3 ports (ends and center) are machined with an 8AN ORB (3\/4-16 female) port. For a list of 8AN ORB adapter fittings, go HERE. Machined insulating mounting spacers and washers are included to completely isolate fuel created by the cylinder head and transferred through the mounting bolts. The injectors are at a max angle to ensure proper spray into the ports.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eVEHICLE COMPATIBILTY\u003cbr\u003e\u003cbr\u003e2013+ Ford Focus ST EcoBoost\u003cbr\u003e2016+ Ford Focus RS EcoBoost\u003cbr\u003e2015+ Ford Mustang EcoBoost","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62764317737290,"sku":"RDE-20-0326","price":416.91,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0326_CAD.jpg?v=1784498302"},{"product_id":"radium-engineering-fuel-surge-tank-install-kit-ford-focus-st-13-ford-focus-rs-15","title":"Radium Engineering Fuel Surge Tank Install Kit For Ford Focus ST 13+ Ford Focus RS 15+","description":"Radium Engineering Fuel Surge Tank Install Kit, Focus EcoBoost This comprehensive installation kit includes everything needed to install a Radium fuel surge tank (FST-R) in a 2013+ Focus ST and 2015+ Focus RS. If using auxillary port injection, consider this FST kitComplete bolt-in kit; Contains all necessary parts for installation, plumbing and powering the surge tank pump; excellent way to add more pump capacity to the vehicle\u003cbr\u003eWhat is Included?-Aluminum MK3 Focus FST Mounting Bracket-Aluminum Push Lok -6AN Hose Ends-AN and OEM Style Adapter Fittings-Vapor Shield 3\/8\" (-6AN) EFI Hose-Wiring Components with Relay and Fuse-Stainless Steel Hardware","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62764317770058,"sku":"RDE-20-0365","price":493.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0365.jpg?v=1784498302"},{"product_id":"radium-engineering-fuel-filter-kit-with-10-micron-stainless-filter-ford-focus-rs-16","title":"Radium Engineering Fuel Filter Kit With 10 Micron Stainless Filter Ford Focus RS 16+","description":"Radium Engineering Filter kit is designed for the 2016+ Ford Focus RS and is not compatible with the Focus ST. It is designed to replace the OEM fuel filter which is plumbed between the electric and mechanical fuel pump. The Radium kit installs in minutes. No cutting or drilling is required. A couple of wrenches is all that is needed. \u003cbr\u003eBecause the Radium filter is less restrictive than the OEM Ford filter, there is less stress put on the fuel pump (3-5.5psi less). Lower pre filter pressures will permit less current draw and thus less fuel temperature. Furthermore, this phenomenon permits an increase in fuel flow. The red marks below represent one aftermarket pump and the purple marks denote 2 aftermarket pumps. Note that there is a 2% and 4.5% flow increase, respectively.\u003cbr\u003eThe filter can withstand alternate fuels such as methanol, ethanol, E85, etc.\u003cbr\u003eIncluded-Billet Aluminum Fuel Filter (selectable element)-Billet Aluminum 2-Piece Clamp-Billet Aluminum SAE Male Fittings-Aluminum Mounting Bracket -Stainless Steel Hardware","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62764317802826,"sku":"RDE-20-0332-03","price":235.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0332-03.jpg?v=1784498303"},{"product_id":"radium-engineering-fuel-filter-kit-with-6-micron-microglass-filter-ford-focus-rs-16","title":"Radium Engineering Fuel Filter Kit With 6 Micron Microglass Filter Ford Focus RS 16+","description":"Radium Engineering Filter kit is designed for the 2016+ Ford Focus RS and is not compatible with the Focus ST. It is designed to replace the OEM fuel filter which is plumbed between the electric and mechanical fuel pump. The Radium kit installs in minutes. No cutting or drilling is required. A couple of wrenches is all that is needed. \u003cbr\u003eBecause the Radium filter is less restrictive than the OEM Ford filter, there is less stress put on the fuel pump (3-5.5psi less). Lower pre filter pressures will permit less current draw and thus less fuel temperature. Furthermore, this phenomenon permits an increase in fuel flow. The red marks below represent one aftermarket pump and the purple marks denote 2 aftermarket pumps. Note that there is a 2% and 4.5% flow increase, respectively.\u003cbr\u003eThe filter can withstand alternate fuels such as methanol, ethanol, E85, etc.\u003cbr\u003eIncluded-Billet Aluminum Fuel Filter (selectable element)-Billet Aluminum 2-Piece Clamp-Billet Aluminum SAE Male Fittings-Aluminum Mounting Bracket -Stainless Steel Hardware","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62764317835594,"sku":"RDE-20-0332-05","price":213.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0332-03_8dd73151-faf2-4102-8801-e3e4e12e27ba.jpg?v=1784498303"},{"product_id":"radium-engineering-fuel-hanger-wal-f90000274-285-honda-integra-90-93-honda-civic-crx-88-91","title":"Radium Engineering Fuel Hanger (wal F90000274\/285) Honda Integra 90-93 Honda Civic CRX 88-91","description":"Radium Engineering Fuel Hanger, Fits Walbro F90000267\/274\/285 or Brushless Pumps\u003cbr\u003e\u003cbr\u003eRadium Engineering fuel hanger replaces the stock fuel pump assembly. No cutting or modifying of the vehicle's sheet metal or fuel tank is required for installation.\u003cbr\u003e\u003cbr\u003eThe fuel pump is positioned in the factory collector bowl for fuel starvation protection. \u003cbr\u003e\u003cbr\u003eThe fuel pump outlet is tapped for 8AN ORB (3\/4\"-16) female threads on the top plate.\u003cbr\u003e1. The preinstalled -6AN male fitting permits an aftermarket feed line and\/or connects to the plumbing kit listed below.\u003cbr\u003e\u003cbr\u003eThe return inlet is tapped for 6AN ORB (9\/16\"-18) female threads on the top plate. \u003cbr\u003e1. The provided -6AN male fitting permits an aftermarket return line and\/or connects to the plumbing kit listed below.\u003cbr\u003e\u003cbr\u003eFUEL PUMPS\u003cbr\u003ePart numbers 20-1790 and 20-1792 are configured to be used with 1 aftermarket fuel pump.\u003cbr\u003eNOTES:\u003cbr\u003e1. If 2 aftermarket pumps are required, the supplementary \"dual pump add-on\" (20-1796 or 20-1797 listed below) is also required.\u003cbr\u003e2. If installing a brushless pump, the \"dual pump add-on\" CANNOT be used due to the extra brushless controller wires.\u003cbr\u003e3. Choosing the best fuel pump(s) is based on the expected engine power output, fuel type (gasoline, E85, etc.), and fuel pressure.\u003cbr\u003e\u003cbr\u003eP\/N: 20-1790\u003cbr\u003e**AEM 50-1000\u003cbr\u003e**AEM 50-1200\u003cbr\u003e**AEM 50-1220\u003cbr\u003e**+AEM 50-1230\u003cbr\u003e**+AEM 50-1235\u003cbr\u003e*Walbro GSS342\u003cbr\u003e\u003cbr\u003eP\/N: 20-1792\u003cbr\u003e*Walbro F90000267\u003cbr\u003e*Walbro F90000274 \u003cbr\u003e*Walbro F90000285\u003cbr\u003e*+Walbro F90000295\u003cbr\u003e*+Ti Automotive E5LM (brushless)\u003cbr\u003e**Protec 11928 (brushless)\u003cbr\u003e**Fuelab 49614 (brushless)\u003cbr\u003e**Deatschwerks DW440 (brushless)\u003cbr\u003e**Deatschwerks DW810 (brushless)\u003cbr\u003e\u003cbr\u003e*Sock filters are included in this kit for these pumps.\u003cbr\u003e**Sock filters are included by the fuel pump manufacture.\u003cbr\u003e+These pumps do NOT feature a check valve.\u003cbr\u003e\u003cbr\u003eELECTRICAL\u003cbr\u003eThe custom designed stainless steel electrical studs easily handle the high current demand that compact multi-pin bulkhead connectors lack. These serviceable connections are hermetically sealed and impervious to all standard and exotic fuels. Non-conductive anodized aluminum acorn nuts are provided to prevent any accidental short circuiting. Furthermore, the in-tank wiring is insulated with high quality chemically resistant ETFE. \u003cbr\u003e\u003cbr\u003eNotes\u003cbr\u003e1. Single Walbro GSS342 (255LPH) fuel pump installations can re-use the OEM fuel pump wiring.\u003cbr\u003e2. It is recommended to upgrade OEM wiring to ensure the pumps are receiving full power and operating at their full potential.\u003cbr\u003e3. Universal fuel pump wiring kits can be found HERE. Select one for each aftermarket pump.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003e-Drop-In Installation\u003cbr\u003e-Anodized Aluminum Construction\u003cbr\u003e-Merged 8AN ORB Female Pump-Out Port\u003cbr\u003e-Fittings for Aftermarket Fuel Lines\u003cbr\u003e-Capable of 2 Pumps with Add-On\u003cbr\u003e-Compatible with Various Pumps\u003cbr\u003e-Included Fuel Pump Filter Sock\u003cbr\u003e-High Current Electrical Hardware\u003cbr\u003e-Stainless Steel Hardware and Clamps\u003cbr\u003e-Gasoline, Methanol, and E85 Compliant\u003cbr\u003e-Anti-rotation Electrical Terminals\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY\u003cbr\u003e90-93 Acura Integra (All models\/trims\/RHD\/LHD)\u003cbr\u003e88-91 Honda Civic (All models\/trims\/RHD\/LHD)\u003cbr\u003e88-91 Honda CR-X (All models\/trims\/RHD\/LHD)\u003cbr\u003e\u003cbr\u003eDual Pump Add On\u003cbr\u003e\u003cbr\u003ePart numbers 20-1796 and 20-1797 are supplementary add-ons to the fuel pump hanger discussed above.","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62764360728906,"sku":"RDE-20-1792","price":235.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-1792.jpg?v=1784498926"},{"product_id":"radium-engineering-fuel-hanger-walgss342g3-or-aem50-1200-honda-integra-90-93-honda-civic-crx-88-91","title":"Radium Engineering Fuel Hanger (walGSS342G3 or aem50-1200) Honda Integra 90-93 Honda Civic CRX 88-91","description":"Radium Engineering fuel hanger replaces the stock fuel pump assembly. No cutting or modifying of the vehicle's sheet metal or fuel tank is required for installation.\u003cbr\u003e\u003cbr\u003eThe fuel pump is positioned in the factory collector bowl for fuel starvation protection. \u003cbr\u003e\u003cbr\u003eThe fuel pump outlet is tapped for 8AN ORB (3\/4\"-16) female threads on the top plate.\u003cbr\u003e1. The preinstalled -6AN male fitting permits an aftermarket feed line and\/or connects to the plumbing kit listed below.\u003cbr\u003e\u003cbr\u003eThe return inlet is tapped for 6AN ORB (9\/16\"-18) female threads on the top plate. \u003cbr\u003e1. The provided -6AN male fitting permits an aftermarket return line and\/or connects to the plumbing kit listed below.\u003cbr\u003e\u003cbr\u003eFUEL PUMPS\u003cbr\u003ePart numbers 20-1790 and 20-1792 are configured to be used with 1 aftermarket fuel pump.\u003cbr\u003eNOTES:\u003cbr\u003e1. If 2 aftermarket pumps are required, the supplementary \"dual pump add-on\" (20-1796 or 20-1797 listed below) is also required.\u003cbr\u003e2. If installing a brushless pump, the \"dual pump add-on\" CANNOT be used due to the extra brushless controller wires.\u003cbr\u003e3. Choosing the best fuel pump(s) is based on the expected engine power output, fuel type (gasoline, E85, etc.), and fuel pressure.\u003cbr\u003e\u003cbr\u003eP\/N: 20-1790\u003cbr\u003e**AEM 50-1000\u003cbr\u003e**AEM 50-1200\u003cbr\u003e**AEM 50-1220\u003cbr\u003e**+AEM 50-1230\u003cbr\u003e**+AEM 50-1235\u003cbr\u003e*Walbro GSS342\u003cbr\u003e\u003cbr\u003eP\/N: 20-1792\u003cbr\u003e*Walbro F90000267\u003cbr\u003e*Walbro F90000274 \u003cbr\u003e*Walbro F90000285\u003cbr\u003e*+Walbro F90000295\u003cbr\u003e*+Ti Automotive E5LM (brushless)\u003cbr\u003e**Protec 11928 (brushless)\u003cbr\u003e**Fuelab 49614 (brushless)\u003cbr\u003e**Deatschwerks DW440 (brushless)\u003cbr\u003e**Deatschwerks DW810 (brushless)\u003cbr\u003e\u003cbr\u003e*Sock filters are included in this kit for these pumps.\u003cbr\u003e**Sock filters are included by the fuel pump manufacture.\u003cbr\u003e+These pumps do NOT feature a check valve.\u003cbr\u003e\u003cbr\u003eELECTRICAL\u003cbr\u003eThe custom designed stainless steel electrical studs easily handle the high current demand that compact multi-pin bulkhead connectors lack. These serviceable connections are hermetically sealed and impervious to all standard and exotic fuels. Non-conductive anodized aluminum acorn nuts are provided to prevent any accidental short circuiting. Furthermore, the in-tank wiring is insulated with high quality chemically resistant ETFE. \u003cbr\u003e\u003cbr\u003eNotes\u003cbr\u003e1. Single Walbro GSS342 (255LPH) fuel pump installations can re-use the OEM fuel pump wiring.\u003cbr\u003e2. It is recommended to upgrade OEM wiring to ensure the pumps are receiving full power and operating at their full potential.\u003cbr\u003e3. Universal fuel pump wiring kits can be found HERE. Select one for each aftermarket pump.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003e-Drop-In Installation\u003cbr\u003e-Anodized Aluminum Construction\u003cbr\u003e-Merged 8AN ORB Female Pump-Out Port\u003cbr\u003e-Fittings for Aftermarket Fuel Lines\u003cbr\u003e-Capable of 2 Pumps with Add-On\u003cbr\u003e-Compatible with Various Pumps\u003cbr\u003e-Included Fuel Pump Filter Sock\u003cbr\u003e-High Current Electrical Hardware\u003cbr\u003e-Stainless Steel Hardware and Clamps\u003cbr\u003e-Gasoline, Methanol, and E85 Compliant\u003cbr\u003e-Anti-rotation Electrical Terminals\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY\u003cbr\u003e90-93 Acura Integra (All models\/trims\/RHD\/LHD)\u003cbr\u003e88-91 Honda Civic (All models\/trims\/RHD\/LHD)\u003cbr\u003e88-91 Honda CR-X (All models\/trims\/RHD\/LHD)\u003cbr\u003e\u003cbr\u003eDual Pump Add On\u003cbr\u003e\u003cbr\u003ePart numbers 20-1796 and 20-1797 are supplementary add-ons to the fuel pump hanger discussed above.","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62764369510730,"sku":"RDE-20-1790","price":219.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-1790.jpg?v=1784499046"},{"product_id":"radium-engineering-dual-pump-add-on-gss342g3-or-50-1200-honda-integra-90-93-honda-civic-crx-88-91","title":"Radium Engineering Dual Pump Add-On (GSS342G3 or 50-1200) Honda Integra 90-93 Honda Civic CRX 88-91","description":"Radium Engineering Honda Dual Pump Add-On Part numbers 20-1796 and 20-1797 are supplementary add-ons to the fuel pump hanger\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY\u003cbr\u003e90-93 Acura Integra (All models\/trims\/RHD\/LHD)\u003cbr\u003e88-91 Honda Civic (All models\/trims\/RHD\/LHD)\u003cbr\u003e88-91 Honda CR-X (All models\/trims\/RHD\/LHD)\u003cbr\u003e\u003cbr\u003eNOTES:\u003cbr\u003e1. Part number 20-1790 or 20-1792 are required to use these add-ons.\u003cbr\u003e2. If a brushless pump was installed, a \"dual pump add-on\" CANNOT be used due to the extra brushless controller wires. \u003cbr\u003e\u003cbr\u003eThe architecture of this Honda fuel tank is very unique. Because the opening is so small, 2 pumps cannot fit through at the same time. Additionally, the angle of insertion combined with the tall collector bowl and shallow tank make dual pump installation rather difficult.\u003cbr\u003e\u003cbr\u003eAn electrical plug and a SAE quick connector eliminate the need to perform tedious assembly before dropping the entire assembly into the tank. Both fuel pumps merge into the single 8AN ORB outlet of the fuel hat. And because of the integrated check valves with the following pumps, staging is permitted. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eFUEL PUMPS\u003cbr\u003eChoosing the best fuel pump is based on the expected engine power output, fuel type (gasoline, E85, etc.), and fuel pressure.\u003cbr\u003e\u003cbr\u003eP\/N: 20-1796\u003cbr\u003e**AEM 50-1000\u003cbr\u003e**AEM 50-1200\u003cbr\u003e**AEM 50-1220\u003cbr\u003e**+AEM 50-1230\u003cbr\u003e**+AEM 50-1235\u003cbr\u003e*Walbro GSS342\u003cbr\u003e\u003cbr\u003eP\/N: 20-1797\u003cbr\u003e*Walbro F90000267\u003cbr\u003e*Walbro F90000274 \u003cbr\u003e*Walbro F90000285\u003cbr\u003e*+Walbro F90000295\u003cbr\u003e\u003cbr\u003e*Sock filters are included in this kit for these pumps.\u003cbr\u003e**Sock filters are included by the fuel pump manufacture.\u003cbr\u003e+These pumps do NOT feature a check valve.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003e-Gasoline, Methanol, and E85 Compliant\u003cbr\u003e-Compatible with Various Pumps\u003cbr\u003e-Included Fuel Pump Filter Sock\u003cbr\u003e-Plug and Play Installation\u003cbr\u003e-Bolt-On Stainless Pump Bracket","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62764369543498,"sku":"RDE-20-1796","price":153.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-1796.jpg?v=1784499048"},{"product_id":"radium-engineering-dual-pump-add-on-f90000267-274-285-honda-integra-90-93-honda-civic-crx-88-91","title":"Radium Engineering Dual Pump Add-On (F90000267\/274\/285) Honda Integra 90-93 Honda Civic CRX 88-91","description":"Radium Engineering Honda Dual Pump Add-On Part numbers 20-1796 and 20-1797 are supplementary add-ons to the fuel pump hanger\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY\u003cbr\u003e90-93 Acura Integra (All models\/trims\/RHD\/LHD)\u003cbr\u003e88-91 Honda Civic (All models\/trims\/RHD\/LHD)\u003cbr\u003e88-91 Honda CR-X (All models\/trims\/RHD\/LHD)\u003cbr\u003e\u003cbr\u003eNOTES:\u003cbr\u003e1. Part number 20-1790 or 20-1792 are required to use these add-ons.\u003cbr\u003e2. If a brushless pump was installed, a \"dual pump add-on\" CANNOT be used due to the extra brushless controller wires. \u003cbr\u003e\u003cbr\u003eThe architecture of this Honda fuel tank is very unique. Because the opening is so small, 2 pumps cannot fit through at the same time. Additionally, the angle of insertion combined with the tall collector bowl and shallow tank make dual pump installation rather difficult.\u003cbr\u003e\u003cbr\u003eAn electrical plug and a SAE quick connector eliminate the need to perform tedious assembly before dropping the entire assembly into the tank. Both fuel pumps merge into the single 8AN ORB outlet of the fuel hat. And because of the integrated check valves with the following pumps, staging is permitted. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eFUEL PUMPS\u003cbr\u003eChoosing the best fuel pump is based on the expected engine power output, fuel type (gasoline, E85, etc.), and fuel pressure.\u003cbr\u003e\u003cbr\u003eP\/N: 20-1796\u003cbr\u003e**AEM 50-1000\u003cbr\u003e**AEM 50-1200\u003cbr\u003e**AEM 50-1220\u003cbr\u003e**+AEM 50-1230\u003cbr\u003e**+AEM 50-1235\u003cbr\u003e*Walbro GSS342\u003cbr\u003e\u003cbr\u003eP\/N: 20-1797\u003cbr\u003e*Walbro F90000267\u003cbr\u003e*Walbro F90000274 \u003cbr\u003e*Walbro F90000285\u003cbr\u003e*+Walbro F90000295\u003cbr\u003e\u003cbr\u003e*Sock filters are included in this kit for these pumps.\u003cbr\u003e**Sock filters are included by the fuel pump manufacture.\u003cbr\u003e+These pumps do NOT feature a check valve.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003e-Gasoline, Methanol, and E85 Compliant\u003cbr\u003e-Compatible with Various Pumps\u003cbr\u003e-Included Fuel Pump Filter Sock\u003cbr\u003e-Plug and Play Installation\u003cbr\u003e-Bolt-On Stainless Pump Bracket","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62764369576266,"sku":"RDE-20-1797","price":170.03,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-1797.jpg?v=1784499048"},{"product_id":"radium-engineering-fuel-pump-hanger-dual-pump-add-on-honda-integra-94-01-honda-civic-92-00","title":"Radium Engineering Fuel Pump Hanger Dual Pump Add-On Honda Integra 94-01 Honda Civic 92-00","description":"Radium Engineering Honda Dual Pump hanger upgrade - Part numbers 20-0796-00 and 20-0797-00 are add-ons to the fuel pump hanger listed above. NOTE: Part numbers 20-0790-00 or 20-0792-00 must be purchased to use these add-ons.\u003cbr\u003e\u003cbr\u003eThe architecture of this Honda fuel tank is very unique. Because the opening is so small, 2 pumps cannot fit through at the same time. Additionally, the angle of insertion combined with the tall collector bowl and shallow tank make dual pump installation rather difficult. Furthermore, it is NOT possible to fit 2 Walbro 39\/50 DCSS fuel pumps (F90000267\/274\/285) next to each other in the Honda fuel tank. The internal OEM collector bowl is physically too narrow. But when installed inline, these large base pumps can fit, as shown.\u003cbr\u003e\u003cbr\u003eThe rear pump assembly is placed in the tank first. A tool is provided to keep this pump back and away while inserting the front pump. An electrical plug and a SAE quick connector eliminate the need to perform tedious assembly before dropping the entire assembly into the tank. Both fuel pumps merge into the single 8AN ORB outlet of the fuel hat. And because of the integrated check valves, fuel pump staging is permitted. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eFUEL PUMPS\u003cbr\u003eChoosing the best fuel pump is based on the expected engine power output, fuel type (gasoline, E85, etc.), and fuel pressure.\u003cbr\u003e\u003cbr\u003eP\/N: 20-0796-00 can be used with the AEM 50-1000, AEM 50-1200, Walbro GSS342, or other pumps with the same physical shape and electrical connector.\u003cbr\u003eP\/N: 20-0797-00 can be used with the Walbro 39\/50 DCSS pumps including F90000267, F90000274 or F90000285 pumps.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003e-Gasoline, Methanol, and E85 Compliant\u003cbr\u003e-Compatible with Various Pumps\u003cbr\u003e-Included Fuel Pump Filter Sock\u003cbr\u003e-Plug and Play Installation\u003cbr\u003e-Bolt-On Stainless Steel Pump Bracket\u003cbr\u003e-Polished Installation Tool","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62764473418058,"sku":"RDE-20-0796-00","price":153.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0796-00.jpg?v=1784500438"},{"product_id":"radium-engineering-fuel-hanger-for-walbro-gss342-or-aem-50-12-honda-integra-94-01-honda-civic-92-00","title":"Radium Engineering Fuel Hanger For Walbro GSS342 or AEM 50-12 Honda Integra 94-01 Honda Civic 92-00","description":"The fuel pump is positioned in the factory collector bowl for fuel starvation protection. \u003cbr\u003e\u003cbr\u003eThe fuel pump outlet is tapped for 8AN ORB (3\/4\"-16) female threads on the top plate. There are multiple adapter fittings included for the outlet.\u003cbr\u003e1. The preinstalled -6AN male fitting permits an aftermarket feed line.\u003cbr\u003e2. The barbed adapter fitting permits the (94-95 Integra\/92-95 Civic) OEM feed line to be reused.\u003cbr\u003e3. The SAE quick connect fitting permits the (96-01 Integra\/96-00 Civic) OEM feed line to be reused.\u003cbr\u003e\u003cbr\u003eThere are 2 fittings included for the return port.\u003cbr\u003e1. The preinstalled barbed fitting permits the OEM return line to be reused.\u003cbr\u003e2. The -6AN male fitting permits an aftermarket return line.\u003cbr\u003e\u003cbr\u003eAll fittings are machined low enough to clear the fuel pump acess cover.\u003cbr\u003e\u003cbr\u003eFUEL PUMPS\u003cbr\u003ePart numbers 20-0790-00 and 20-0792-00 are configured to be used with 1 aftermarket fuel pump. NOTE: If 2 aftermarket pumps are required, the supplementary \"dual pump add-on\" (20-0796-00 or 20-0797 listed below) is also required.\u003cbr\u003e\u003cbr\u003eChoosing the best fuel pump(s) is based on the expected engine power output, fuel type (gasoline, E85, etc.), and fuel pressure.\u003cbr\u003e\u003cbr\u003eP\/N: 20-0790-00 can be used with the AEM 50-1000,AEM 50-1200, Walbro GSS342, or other pumps with the same physical shape and electrical connector.\u003cbr\u003eP\/N: 20-0792-00 can be used with the Walbro 39\/50 DCSS pumps including F90000267, F90000274 or F90000285 pumps.\u003cbr\u003e\u003cbr\u003eELECTRICAL\u003cbr\u003eThe custom designed stainless steel electrical studs easily handle the high current demand that compact multi-pin bulkhead connectors lack. These serviceable connections are hermetically sealed and impervious to all standard and exotic fuels. Non-conductive anodized aluminum acorn nuts are provided to prevent any accidental short circuiting. Furthermore, the in-tank wiring is insulated with high quality chemically resistant ETFE. \u003cbr\u003e\u003cbr\u003eNotes\u003cbr\u003e1. Single Walbro GSS342 (255LPH) fuel pump installations can re-use the OEM fuel pump wiring.\u003cbr\u003e2. It is recommended to upgrade OEM wiring to ensure the pumps are receiving full power and operating at their full potential.\u003cbr\u003e3. Universal fuel pump wiring kits can be found HERE. Select one for each aftermarket pump.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003e-Drop-In Installation\u003cbr\u003e-Anodized Aluminum Construction\u003cbr\u003e-Merged 8AN ORB Female Pump-Out Port\u003cbr\u003e-Fittings for Aftermarket and OEM Lines\u003cbr\u003e-Capable of 2 Pumps with Add-On\u003cbr\u003e-Compatible with Various Pumps\u003cbr\u003e-Included Fuel Pump Filter Sock\u003cbr\u003e-High Current Electrical Hardware\u003cbr\u003e-Stainless Steel Hardware and Clamps\u003cbr\u003e-Gasoline, Methanol, and E85 Compliant","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62764473450826,"sku":"RDE-20-0790-00","price":252.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0792-00_Cutaway.jpg?v=1784500439"},{"product_id":"radium-engineering-fuel-hanger-for-walbro-f90000267-274-285-honda-integra-94-01-honda-civic-92-00","title":"Radium Engineering Fuel Hanger For Walbro F90000267\/274\/285 Honda Integra 94-01 Honda Civic 92-00","description":"Radium Engineering Honda Integra - Civic Fuel Hanger The fuel pump is positioned in the factory collector bowl for fuel starvation protection. \u003cbr\u003e\u003cbr\u003eThe fuel pump outlet is tapped for 8AN ORB (3\/4\"-16) female threads on the top plate. There are multiple adapter fittings included for the outlet.\u003cbr\u003e1. The preinstalled -6AN male fitting permits an aftermarket feed line.\u003cbr\u003e2. The barbed adapter fitting permits the (94-95 Integra\/92-95 Civic) OEM feed line to be reused.\u003cbr\u003e3. The SAE quick connect fitting permits the (96-01 Integra\/96-00 Civic) OEM feed line to be reused.\u003cbr\u003e\u003cbr\u003eThere are 2 fittings included for the return port.\u003cbr\u003e1. The preinstalled barbed fitting permits the OEM return line to be reused.\u003cbr\u003e2. The -6AN male fitting permits an aftermarket return line.\u003cbr\u003e\u003cbr\u003eAll fittings are machined low enough to clear the fuel pump acess cover.\u003cbr\u003e\u003cbr\u003eFUEL PUMPS\u003cbr\u003ePart numbers 20-0790-00 and 20-0792-00 are configured to be used with 1 aftermarket fuel pump. NOTE: If 2 aftermarket pumps are required, the supplementary \"dual pump add-on\" (20-0796-00 or 20-0797 listed below) is also required.\u003cbr\u003e\u003cbr\u003eChoosing the best fuel pump(s) is based on the expected engine power output, fuel type (gasoline, E85, etc.), and fuel pressure.\u003cbr\u003e\u003cbr\u003eP\/N: 20-0790-00 can be used with the AEM 50-1000,AEM 50-1200, Walbro GSS342, or other pumps with the same physical shape and electrical connector.\u003cbr\u003eP\/N: 20-0792-00 can be used with the Walbro 39\/50 DCSS pumps including F90000267, F90000274 or F90000285 pumps.\u003cbr\u003e\u003cbr\u003eELECTRICAL\u003cbr\u003eThe custom designed stainless steel electrical studs easily handle the high current demand that compact multi-pin bulkhead connectors lack. These serviceable connections are hermetically sealed and impervious to all standard and exotic fuels. Non-conductive anodized aluminum acorn nuts are provided to prevent any accidental short circuiting. Furthermore, the in-tank wiring is insulated with high quality chemically resistant ETFE. \u003cbr\u003e\u003cbr\u003eNotes\u003cbr\u003e1. Single Walbro GSS342 (255LPH) fuel pump installations can re-use the OEM fuel pump wiring.\u003cbr\u003e2. It is recommended to upgrade OEM wiring to ensure the pumps are receiving full power and operating at their full potential.\u003cbr\u003e3. Universal fuel pump wiring kits can be found HERE. Select one for each aftermarket pump.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003e-Drop-In Installation\u003cbr\u003e-Anodized Aluminum Construction\u003cbr\u003e-Merged 8AN ORB Female Pump-Out Port\u003cbr\u003e-Fittings for Aftermarket and OEM Lines\u003cbr\u003e-Capable of 2 Pumps with Add-On\u003cbr\u003e-Compatible with Various Pumps\u003cbr\u003e-Included Fuel Pump Filter Sock\u003cbr\u003e-High Current Electrical Hardware\u003cbr\u003e-Stainless Steel Hardware and Clamps\u003cbr\u003e-Gasoline, Methanol, and E85 Compliant","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62764473483594,"sku":"RDE-20-0792-00","price":268.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0792-00_Cutaway_7e960058-004f-4c4c-b797-4313dbaadb85.jpg?v=1784500440"},{"product_id":"radium-engineering-dual-pump-add-on-for-pn-20-0792-00-walbro-f90000267-274-285-honda-integra-94-01-honda-civic-92-00","title":"Radium Engineering Dual Pump Add-On (for PN 20-0792-00) Walbro F90000267\/274\/285 Honda Integra 94-01 Honda Civic 92-00","description":"Part numbers 20-0796-00 and 20-0797-00 are add-ons to the fuel pump hanger listed above. NOTE: Part numbers 20-0790-00 or 20-0792-00 must be purchased to use these add-ons.\u003cbr\u003e\u003cbr\u003eThe architecture of this Honda fuel tank is very unique. Because the opening is so small, 2 pumps cannot fit through at the same time. Additionally, the angle of insertion combined with the tall collector bowl and shallow tank make dual pump installation rather difficult. Furthermore, it is NOT possible to fit 2 Walbro 39\/50 DCSS fuel pumps (F90000267\/274\/285) next to each other in the Honda fuel tank. The internal OEM collector bowl is physically too narrow. But when installed inline, these large base pumps can fit, as shown.\u003cbr\u003e\u003cbr\u003eThe rear pump assembly is placed in the tank first. A tool is provided to keep this pump back and away while inserting the front pump. An electrical plug and a SAE quick connector eliminate the need to perform tedious assembly before dropping the entire assembly into the tank. Both fuel pumps merge into the single 8AN ORB outlet of the fuel hat. And because of the integrated check valves, fuel pump staging is permitted. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eFUEL PUMPS\u003cbr\u003eChoosing the best fuel pump is based on the expected engine power output, fuel type (gasoline, E85, etc.), and fuel pressure.\u003cbr\u003e\u003cbr\u003eP\/N: 20-0796-00 can be used with the AEM 50-1000, AEM 50-1200, Walbro GSS342, or other pumps with the same physical shape and electrical connector.\u003cbr\u003eP\/N: 20-0797-00 can be used with the Walbro 39\/50 DCSS pumps including F90000267, F90000274 or F90000285 pumps.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003e-Gasoline, Methanol, and E85 Compliant\u003cbr\u003e-Compatible with Various Pumps\u003cbr\u003e-Included Fuel Pump Filter Sock\u003cbr\u003e-Plug and Play Installation\u003cbr\u003e-Bolt-On Stainless Steel Pump Bracket\u003cbr\u003e-Polished Installation Tool","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62764473680202,"sku":"RDE-20-0797-00","price":170.03,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0797-00.jpg?v=1784500440"},{"product_id":"radium-engineering-fluid-lock-dual-catch-can-kit-honda-civic-type-r-17","title":"Radium Engineering Fluid Lock Dual Catch Can Kit Honda Civic Type-R 17+","description":"Radium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick. This kit mount using factory holes and integrate perfectly with the surrounding components. These two oil catch cans (PCV side and CCV side) function completely independent of each other and are sold individually or together. They do NOT vent to atmosphere (VTA), thus are emissions and track legal. Closed loop systems remove the oil and sludge from the PCV gasses before it is routed to the engine to be burned. A closed loop system also promotes negative crankcase pressure for optimal performance. Furthermore, closed systems prevent unwanted oil vapors from entering the cabin. The dipsticks built into the catch cans allow easy inspection of accumulated fluid. No cutting, drilling or permanent modification to the vehicle is required\u003cbr\u003e\u003cbr\u003eThis catch can runs inline with the PCV (positive crankcase ventilation) valve and retains it's factory function. When the intake manifold pressure is close to or greater than atmospheric pressure, the PCV \"check\" valve closes and, thus, this hose experiences no flow. Conversely, the PCV hose will experience \"metered\" vacuum when the engine is idling, steady state cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run. Note: No inline check valve is required since Radium catch cans are pressure sealed. This means a direct intake manifold connection is permitted.\u003cbr\u003e\u003cbr\u003eFor the ultimate in engine protection, Radium recommends 20-0426-FL Dual Catch Can Kit, 17-21 Civic Type-R.  \u003cbr\u003e\u003cbr\u003eCOMPATIBILITY\u003cbr\u003e17-21 Honda Civic Type-R\u003cbr\u003e\u003cbr\u003eEach kit features the following: \u003cbr\u003e-Anodized oil catch can with integrated condenser and dipstick\u003cbr\u003e-Anodized aluminum Civic Type-R specific mounting bracket\u003cbr\u003e-Anodized aluminum -AN adapter fittings and hose ends\u003cbr\u003e-Enough PCV hose for custom applications  \u003cbr\u003e-Stainless steel mounting hardware","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62764671533386,"sku":"RDE-20-0826-FL","price":515.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0426-FL.jpg?v=1784503186"},{"product_id":"radium-engineering-port-injection-kit-honda-civic-type-r-17","title":"Radium Engineering Port Injection Kit Honda Civic Type-R 17+","description":"\u003cp\u003eOffers a solution for adding more fueling capability to the Honda K20C1 engine. Installs between the intake manifold and the head. Fuel rail included.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62764675989834,"sku":"RDE-20-0428","price":329.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0428.jpg?v=1784503247"},{"product_id":"radium-engineering-fluid-lock-catch-can-kit-honda-civic-type-r-ccv-17","title":"Radium Engineering Fluid Lock Catch Can Kit Honda Civic Type-R CCV 17+","description":"Radium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick. This kit mount using factory holes and integrate perfectly with the surrounding components. These two oil catch cans (PCV side and CCV side) function completely independent of each other and are sold individually or together. They do NOT vent to atmosphere (VTA), thus are emissions and track legal. Closed loop systems remove the oil and sludge from the PCV gasses before it is routed to the engine to be burned. A closed loop system also promotes negative crankcase pressure for optimal performance. Furthermore, closed systems prevent unwanted oil vapors from entering the cabin. The dipsticks built into the catch cans allow easy inspection of accumulated fluid. No cutting, drilling or permanent modification to the vehicle is required\u003cbr\u003e\u003cbr\u003eThe 20-0425-FL Catch Can Kit, CCV, Civic Type-R fits under the OEM engine cover with no modifications required.\u003cbr\u003e\u003cbr\u003eThe catch can secures to the RH motor mount. If an aftermarket motor mount is used, minor modifications may be required. This catch can runs inline with the crankcase vent port. At low loads it experiences atmospheric pressure, but when the engine is at high load (WOT), this line will experience high flow out of the crankcase. This would normally lead to oil and sludge accumulation in the air filter intake pipe. Oil accumulation will occur in the intercooler which lowers the thermal efficiency properties of the heat exchanger and leads to decreased performance.\u003cbr\u003eEach kit features the following: \u003cbr\u003e-Anodized oil catch can with integrated condenser and dipstick\u003cbr\u003e-Anodized aluminum Honda FK8 specific mounting bracket\u003cbr\u003e-Anodized aluminum -AN adapter fittings and hose ends\u003cbr\u003e-Enough PCV hose for custom applications  \u003cbr\u003e-Stainless steel mounting hardware\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eCOMPATIBILITY\u003cbr\u003e17-21 Honda Civic Type-R\u003cbr\u003e2023+ Honda Civic Type-R","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62764676022602,"sku":"RDE-20-0825-FL","price":296.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0425INS.jpg?v=1784503248"},{"product_id":"radium-engineering-catch-can-kit-pcv-fluid-lock-honda-civic-type-r-17","title":"Radium Engineering Catch Can Kit PCV Fluid Lock Honda Civic Type-R FK8 17+","description":"Radium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick. This kit mount using factory holes and integrate perfectly with the surrounding components. These two oil catch cans (PCV side and CCV side) function completely independent of each other and are sold individually or together. They do NOT vent to atmosphere (VTA), thus are emissions and track legal. Closed loop systems remove the oil and sludge from the PCV gasses before it is routed to the engine to be burned. A closed loop system also promotes negative crankcase pressure for optimal performance. Furthermore, closed systems prevent unwanted oil vapors from entering the cabin. The dipsticks built into the catch cans allow easy inspection of accumulated fluid. No cutting, drilling or permanent modification to the vehicle is required\u003cbr\u003eThe catch can secures to the RH firewall with no modifications required (FK8 shown below).\u003cbr\u003eThis catch can runs inline with the PCV (positive crankcase ventilation) valve and retains it's factory function. When the intake manifold pressure is close to or greater than atmospheric pressure, the PCV \"check\" valve closes and, thus, this hose experiences no flow. Conversely, the PCV hose will experience \"metered\" vacuum when the engine is idling, steady state cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run. Note: No inline check valve is required since Radium catch cans are pressure sealed. This means a direct intake manifold connection is permitted.\u003cbr\u003eThe Honda Civic Type-R FL5 is shown above.\u003cbr\u003eCOMPATIBILITY17-21 Honda Civic Type-R (LHD Only)2023+ Honda Civic Type-R (LHD Only)","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62764676055370,"sku":"RDE-20-0424-FL","price":230.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0424-FL.jpg?v=1784503249"},{"product_id":"radium-engineering-coolant-tank-kit-honda-civic-type-r-17","title":"Radium Engineering Coolant Tank Kit Honda Civic Type-R 17+","description":"Radium Engineering Coolant Expansion Tank has proved itself over the years in many applications all over the world, in race and street vehicles. The internal volume of the Radium Engineering Coolant Expansion Tank is equivalent to the OEM tank resulting in no coolant loss. The internal design features two chambers with cross-over passages at the top and bottom. \u003cbr\u003e\u003cbr\u003eBecause of continuous and intense heat cycling, plastic coolant tanks have a reputation of failing over time. Fortunately, the rugged 2-piece Radium Engineering replacement is CNC machined from aluminum and anodized for increased longevity. And because aluminum is a superior thermal conductor material, heat transfer is further improved. Additionally, the metal construction is robust enough to use in racing applications.\u003cbr\u003e\u003cbr\u003eThis 2017+ Honda Civic Type-R kit directly replaces the plastic Honda tank without making permanent modifications to the vehicle. A specially designed mounting bracket secures to existing threaded holes and Radium adapter fittings interface with the factory lines. The tank functionality remains the same as the OEM cooling system.\u003cbr\u003e\u003cbr\u003eIncluded\u003cbr\u003e-2-Piece Billet Aluminum Tank\u003cbr\u003e-Aluminum Mounting Bracket \u003cbr\u003e-Aluminum Adapter Fittings\u003cbr\u003e-Heater Hose, 5\/16\"\u003cbr\u003e-Overflow Hose, 7\/32\"\u003cbr\u003e-Stainless Steel Hardware\u003cbr\u003e\u003cbr\u003eThe kit includes all parts necessary for installation. NOTE: The OEM 1.3 Bar Honda pressure cap can be re-used. Alternatively, various pressure reliefs of the Radium Engineering Type-A cap can be purchased","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62764676088138,"sku":"RDE-20-0827","price":373.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0827.jpg?v=1784503249"},{"product_id":"radium-engineering-sound-symposer-block-off-ford-focus-st-13","title":"Radium Engineering Sound Symposer Block Off For Ford Focus ST 13+","description":"Radium Engineering Sound Symposer Block Off  kit is specifically for the 2013+ Ford Focus ST. It is designed to replace the OEM sound symposer system which plumbs engine sounds into the cabin. Once engine modifications are made to these vehicles, the symposer quickly becomes useless. The Radium Engineering block-off frees up space and installs in minutes. No cutting or drilling is required. A couple of wrenches is all that is needed. \u003cbr\u003eThe kit includes two black anodized fittings providing the end user an option to either plug the machined 1\/8\" NPT hole or to add a vacuum reference for any auxiliary components. The kit is designed to reuse the high temperature and chemical-resistant OEM Ford gasket.\u003cbr\u003eIncluded-Billet Aluminum Block-Off Plate-Billet Aluminum 1\/8\" NPT Elbow Fitting-Billet Aluminum 1\/8\" NPT Plug-Plastic Panel Locking Plug-Stainless Steel Hardware-Cable Zip Tie","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62764740477258,"sku":"RDE-20-0356","price":54.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0356.jpg?v=1784503855"},{"product_id":"radium-engineering-catch-can-kit-ccv-fluid-lock-ford-focus-st-15-18","title":"Radium Engineering Catch Can Kit CCV Fluid Lock Ford Focus ST 15-18","description":"Radium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick. These kits mount using factory holes and integrate perfectly with the surrounding components. These two oil catch cans (PCV  and CCV) function completely independent of each other and are sold individually or together. They do NOT vent to atmosphere (VTA), thus are emissions and track legal. Closed loop systems remove the oil and sludge from the PCV gasses before it is routed to the engine to be burned. A closed loop system also promotes negative crankcase pressure for optimal performance. Furthermore, closed systems prevent unwanted oil vapors from entering the cabin. The dipsticks built into the catch cans allow easy inspection of accumulated fluid. No cutting, drilling or permanent modification to the vehicle is required.\u003cbr\u003e\u003cbr\u003e20-0357-FL Compatibility:\u003cbr\u003e15-18 Focus ST\u003cbr\u003e\u003cbr\u003eThese catch can kits mount on the back LH side of the engine bay.\u003cbr\u003e\u003cbr\u003eThis catch can runs inline with the crankcase breather port. At low loads it experiences atmospheric pressure, but when the engine is at high load (WOT), this hose will experience high flow out of the crankcase. This would normally lead to oil and sludge accumulation in the air filter intake pipe. Oil accumulation will occur in the intercooler which lowers the thermal efficiency properties of the heat exchanger and leads to decreased performance.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eEach kit includes the following: \u003cbr\u003e-Anodized oil catch can with integrated condenser and dipstick\u003cbr\u003e-Anodized laser cut Focus specific mounting bracket\u003cbr\u003e-Anodized aluminum -AN adapter fittings and hose ends\u003cbr\u003e-Enough PCV hose for custom applications  \u003cbr\u003e-Stainless steel mounting hardware","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62764740542794,"sku":"RDE-20-0357-FL","price":263.29,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0357-FL.jpg?v=1784503856"},{"product_id":"radium-engineering-fuel-surge-tank-kit-fst-not-incl-honda-s2000-00-05","title":"Radium Engineering Fuel Surge Tank Kit (FST Not Incl) For Honda S2000 00-05","description":"\u003cp\u003eAnodized aluminum; AN and OEM adapter fittings; Stainless steel hardware; PTFE hose multi fuel compliant\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62765012091210,"sku":"RDE-20-0094","price":405.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0094.jpg?v=1784508803"},{"product_id":"radium-engineering-fuel-rail-plumbing-kit-honda-s2000-00-05","title":"Radium Engineering Fuel Rail Plumbing Kit For Honda S2000 00-05","description":"\u003cp\u003eRadium Engineering plumbing kit for honda S2000 AP1 permits the fuel rail to be a plug and play affair. The green 6AN male fitting secures directly to the factory inverted flare line and the 8AN ORB to 6AN male fitting secures to the upper rear fuel rail port. The 6AN PTFE line is used as the new feed line by connecting these 2 aforementioned fittings. The two 8AN ORB fittings plug the front and rear fuel rail ports. The OEM fuel pressure regulator connects to all of the factory lines.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62765012123978,"sku":"RDE-20-0091-PK","price":98.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0091-PK.jpg?v=1784508804"},{"product_id":"radium-engineering-fuel-rail-kit-honda-s2000-00-05","title":"Radium Engineering Fuel Rail Kit For Honda S2000 00-05","description":"Radium Engineering honda S2000 AP1 00-05 Fuel Rail this basic setup does not include fittings Replacement vacuum tubing is included to simplify and eliminate the hard lines.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAppropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers\u003cbr\u003e\u003cbr\u003eThis large bore fuel rail features a large 0.69\" diameter internal bore. It uses all 5 OEM mounting bosses. The fuel rail is machined, anodized, and laser etched for a high quality surface finish.\u003cbr\u003e\u003cbr\u003eIt is compatible with all fuel types including popular alcohol mixtures such as E85. It is also designed to work with OEM fitment fuel injectors.\u003cbr\u003e\u003cbr\u003eThe factory fuel pressure regulator can be used or the port in that location can be used for a 1\/8\" NPT fuel pressure gauge, transducer, plug, etc. \u003cbr\u003e\u003cbr\u003eThis kit eliminates the OEM fuel rail cover and also replaces the air pump system hard tubes with vacuum hose for a cleaner appearance.\u003cbr\u003e\u003cbr\u003eFUEL INJECTOR COMPATIBILITY\u003cbr\u003eThis fuel rail is compatible with factory or OEM equivalent fuel injectors. If upgrading fuel injectors, consult your aftermarket injector supplier for details. Radium Engineering cannot specify any further injector dimensions other than stating ‘OEM equivalent’.\u003cbr\u003e\u003cbr\u003e20-0091-PK Fuel Rail Plumbing, S2000, 00-05\u003cbr\u003eThe plumbing kit permits the fuel rail to be a plug and play affair","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62765012156746,"sku":"RDE-20-0591-02","price":164.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/S2000_Fuel_Rail_Installed2.jpg?v=1784508804"},{"product_id":"radium-engineering-catch-can-kit-pcv-fluid-lock-honda-s2000-00-05-lhd-only","title":"Radium Engineering Catch Can Kit PCV Fluid Lock Honda S2000 00-05 LHD Only","description":"Radium Engineering kits are specifically designed for the 00-05 Honda S2000, LHD (left hand drive) chassis. It is NOT compatible with any RHD (right hand drive) or 06-09 LHD S2000 models. No worries, we have a separate catch can kit specifically for these S2000 models HERE. \u003cbr\u003e\u003cbr\u003eAn oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by accumulated from aggressive driving. Excess oil-saturated air circulating back into the air intake stream can lead to degraded performance. Radium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick. See the More Details tab for information on Radium Oil Catch Cans.\u003cbr\u003eS2000 CATCH CAN KITS\u003cbr\u003eRadium Engineering offers two completely independent S2000 oil catch can kits that are sold individually or together. They do NOT vent to atmosphere (VTA), thus are emissions and track legal. Closed loop systems route clean filtered air back in through the engine to be burned and to promote negative crankcase pressure for optimal performance. Furthermore, closed systems prevent unwanted oil vapors from entering into the cabin.\u003cbr\u003eIf only one kit is purchased, the 20-0093 PCV side kit is recommended. For the ultimate protection, especially when using forced induction, the dual catch can kit 20-0096 is recommended.\u003cbr\u003eThe 20-0093 PCV Catch Can Kit (shown below) runs inline with the 3\/8\" PCV (positive crankcase ventilation) valve. Oil and sludge can enter the intake manifold through this line during normal driving. A catch can is a great way to reduce the amount of pollutants collecting in the intake manifold and degrading engine performance.  Note: Because the Radium catch cans are pressure sealed, they are great for boosted applications as well, so connecting to the intake manifold is permitted.\u003cbr\u003ePCV Kit Includes\u003cbr\u003e-Radium billet oil catch can with integrated condenser and dipstick\u003cbr\u003e-Radium S2000 specific anodized mounting bracket\u003cbr\u003e-Anodized aluminum 6AN hose ends \u003cbr\u003e-Anodized -6AN adapter fittings  \u003cbr\u003e-Stainless steel mounting hardware\u003cbr\u003e-OEM spring hose clamps \u003cbr\u003e-3\/8\" PCV rubber hose","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62765012189514,"sku":"RDE-20-0093-FL","price":241.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0093.jpg?v=1784508805"},{"product_id":"radium-engineering-dual-catch-can-kit-fluid-lock-honda-s2000-00-05-lhd-only","title":"Radium Engineering Dual Catch Can Kit Fluid Lock Honda S2000 00-05 LHD Only","description":"\u003cp\u003eRadium Engineering kits are specifically designed for the 00-05 Honda S2000, LHD (left hand drive) chassis. It is NOT compatible with any RHD (right hand drive) or 06-09 LHD S2000 models. No worries, we have a separate catch can kit specifically for these S2000 models HERE. An oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by accumulated from aggressive driving. Excess oil-saturated air circulating back into the air intake stream can lead to degraded performance. Radium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick. See the More Details tab for information on Radium Oil Catch Cans.S2000 CATCH CAN KITSRadium Engineering offers two completely independent S2000 oil catch can kits that are sold individually or together. They do NOT vent to atmosphere (VTA), thus are emissions and track legal. Closed loop systems route clean filtered air back in through the engine to be burned and to promote negative crankcase pressure for optimal performance. Furthermore, closed systems prevent unwanted oil vapors from entering into the cabin. If only one kit is purchased, the 20-0093 PCV side kit is recommended. For the ultimate protection, especially when using forced induction, the dual catch can kit 20-0096 is recommended.20-0096The dual catch can kit includes both 20-0092 and 20-0093\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62765012222282,"sku":"RDE-20-0096-FL","price":482.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0096.jpg?v=1784508806"},{"product_id":"radium-engineering-catch-can-kit-crankcase-fluid-lock-honda-s2000-00-05-lhd-only","title":"Radium Engineering Catch Can Kit Crankcase Fluid Lock Honda S2000 00-05 LHD Only","description":"Radium Engineering kits are specifically designed for the 00-05 Honda S2000, LHD (left hand drive) chassis. It is NOT compatible with any RHD (right hand drive) or 06-09 LHD S2000 models. No worries, we have a separate catch can kit specifically for these S2000 models HERE. \u003cbr\u003e\u003cbr\u003eAn oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by accumulated from aggressive driving. Excess oil-saturated air circulating back into the air intake stream can lead to degraded performance. Radium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick. See the More Details tab for information on Radium Oil Catch Cans.\u003cbr\u003eThe 20-0092 CCV Catch Can Kit (shown below) runs inline with the 1\/2\" valve cover breather port and air intake pipe. At low loads it experiences atmospheric pressure, but when the engine is at high load (WOT), this hose will experience vacuum and would normally be drawing unwanted crankcase vapors, unspent fuel, and oil sludge into the air filter intake pipe. If the engine is turbocharged or supercharged a catch can will help keep oil out of the charge piping. This kit is compatible with all strut tower braces.\u003cbr\u003eCrankcase Kit Includes\u003cbr\u003e-Radium billet oil catch can with integrated condenser and dipstick\u003cbr\u003e-Radium laser cut anodized S2000 specific mounting bracket\u003cbr\u003e-Anodized aluminum -8AN hose ends and adapter fittings\u003cbr\u003e-Enough 1\/2\" PCV rubber hose to mate to custom applications \u003cbr\u003e-Vacuum and heater hose to eliminate OEM metal hard tube loom \u003cbr\u003e-Stainless steel mounting hardware","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62765012255050,"sku":"RDE-20-0092-FL","price":252.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0092.jpg?v=1784508806"},{"product_id":"radium-engineering-dual-catch-can-kit-fluid-lock-honda-s2000-all-rhd-and-lhd-06-09","title":"Radium Engineering Dual Catch Can Kit Fluid Lock Honda S2000 All RHD and LHD 06-09","description":"Radium Engineering installation kit was specifically designed for the 00-09 RHD and 06-09 LHD Honda S2000. It is not compatible with 00-05 Honda S2000 LHD models unless the cruise control module is removed. Instead, please go to the 00-05 Honda S2000 LHD Catch Can Kit product page\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAn oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by accumulated from aggressive driving. Excess oil saturated air circulating back into the air intake stream can lead to degraded performance. Radium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003e-Effectively raises the octane and increased engine performance from cleaner inlet air \u003cbr\u003e-Prevents oil buildup in the intake or intercooler system walls, throttle body, intake manifold, etc. \u003cbr\u003e-Excessive oil collection can be an indicator of a damaged engine.\u003cbr\u003e-Lowers hydrocarbon emissions \u003cbr\u003e-Capacity: 7 fluid ounces \u003cbr\u003e-Height (without fittings): 5 inches \u003cbr\u003e-Outside Diameter: 2.45 inches \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eS2000 CATCH CAN KITS\u003cbr\u003eRadium Engineering offers two independent S2000 oil catch can kits that are sold individually or together. They do NOT vent to atmosphere (VTA), thus are emissions and track legal. Closed loop systems route clean filtered air back in through the engine to be burned and to promote negative crankcase pressure for optimal performance. Furthermore, closed systems prevent unwanted oil vapors from entering into the cabin.\u003cbr\u003e\u003cbr\u003eThe 20-0097-FL Crankcase Catch Can Kit runs inline with the 1\/2\" valve cover breather port. At low loads it experiences atmospheric pressure, but when the engine is at high load (WOT), this hose will experience vacuum and would normally be drawing unwanted crankcase vapors, unspent fuel, and oil sludge into the air filter intake pipe. If the engine is turbocharged or supercharged and you are finding oil accumulation stuck in the intercooler, this catch can is a necessity as oil will lower the thermal efficiency properties of the heat exchange process.\u003cbr\u003e\u003cbr\u003eThe 20-0098-FL PCV Catch Can Kit comes with 2 mounting brackets. One bracket will be disregarded depending if the crankcase vent kit will also be used. This catch can runs inline with the 3\/8\" PCV (positive crankcase ventilation) valve. When the intake manifold pressure is close to or greater than atmospheric pressure, the PCV \"check\" valve closes and, thus, this hose experiences no flow. Conversely, the PCV hose will experience \"metered\" vacuum when the engine is idling, low load cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run. Note: Because the Radium catch cans are pressure sealed, they are great for boosted applications as well so connecting to the intake manifold is permitted.\u003cbr\u003e20-0098-FL PCV Kit Includes:\u003cbr\u003e-Radium billet oil catch can with integrated condenser and dipstick\u003cbr\u003e-Radium S2000-specific laser cut powder coated mounting bracket\u003cbr\u003e-Radium universal laser cut powder coated mounting bracket\u003cbr\u003e-Anodized aluminum -6AN hose ends \u003cbr\u003e-Anodized 6AN adapter fittings  \u003cbr\u003e-Stainless steel mounting hardware\u003cbr\u003e-OEM spring hose clamps \u003cbr\u003e-3\/8\" PCV rubber hose  \u003cbr\u003e \u003cbr\u003eFor the ultimate in engine protection, Radium recommends the S2000 20-0099-FL Dual Catch Can Kit (shown below) which utilizes both the \"Crankcase\" catch can and \"PCV\" catch can.","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62765037715786,"sku":"RDE-20-0099-FL","price":515.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0099.jpg?v=1784509188"},{"product_id":"radium-engineering-fuel-surge-tank-kit-fst-not-incl-honda-s2000-06-09","title":"Radium Engineering Fuel Surge Tank Kit (FST Not Incl) For Honda S2000 06-09","description":"\u003cp\u003eRadium Engineering comprehensive installation kit includes everything needed to install a Radium Engineering fuel surge tank with a single 39mm fuel pump in a 06-09 Honda S2000. The kit was not designed to work with the MPFST\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62765038207306,"sku":"RDE-20-0114","price":378.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0114.jpg?v=1784509196"},{"product_id":"radium-engineering-fuel-rail-plumbing-kit-honda-s2000-06-09","title":"Radium Engineering Fuel Rail Plumbing Kit For Honda S2000 06-09","description":"Allows connection of the Radium fuel rail 20-0391-02 to the factory fuel system.\u003cbr\u003eAll fittings are included to complete the installation.","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62765038240074,"sku":"RDE-20-0391-PK","price":98.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0391-PK.jpg?v=1784509196"},{"product_id":"radium-engineering-fuel-rail-honda-s2000-06-09","title":"Radium Engineering Fuel Rail Honda S2000 06-09","description":"\u003cp\u003eThree 8AN ORB ports. Designed for OEM injector fitment. CNC machined aluminum. Laser etched and anodized. Stainless steel hardware.This large bore fuel rail features a large 0.69\" diameter internal bore. The fuel rail is machined, anodized, and laser etched for a high quality surface finish. It is compatible with all fuel types including popular alcohol mixtures such as E85.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62765038272842,"sku":"RDE-20-0391-02","price":164.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0391-02.jpg?v=1784509197"},{"product_id":"radium-engineering-t4-ecu-connectors-and-pins-lotus-2zz-ge-04-05","title":"Radium Engineering T4 ECU Connectors And Pins For Lotus (2ZZ-GE) 04-05","description":"These connectors and terminals are found on the 04-05 Lotus Elise and Lotus Exige that utilize the T4 ECU. \u003cbr\u003eIncludes:\u003cbr\u003e52 Way Receptacle Connector (x1) 28 Way Receptacle Connector (x1) Small Pin Terminals (x80) Large Pin Terminals (x5) 52 Pin Backshell (x1) 28 Pin Connector (x1)","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62765071827274,"sku":"RDE-17-0010","price":109.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/17-0010.jpg?v=1784509548"},{"product_id":"radium-engineering-catch-can-kit-fluid-lock-lotus-evora-10-22","title":"Radium Engineering Catch Can Kit - Fluid Lock Lotus Evora 10-22","description":"Radium Engineering lotus evora catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick. This specific dual catch can kit is designed for the Lotus Evora and includes a specialized mounting bracket as well as all necessary hoses, fittings and hardware. It is compatible with only the Evora and Evora-S (supercharged).\u003cbr\u003eFEATURES:\u003cbr\u003e-Effectively raises the octane and increased engine performance from cleaner inlet air -Prevents oil buildup in the intake or intercooler system walls, throttle body, intake manifold, etc. -Excessive oil collection can be an indicator of a damaged engine. -Lowers hydrocarbon emissions -Capacity: 7 fluid ounces -Height (without fittings): 5 inches -Outside Diameter: 2.45 inches","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62765076087114,"sku":"RDE-20-0026-FL","price":460.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-00263.jpg?v=1784509614"},{"product_id":"radium-engineering-t4e-header-set-lotus-elise-exige-06","title":"Radium Engineering T4E Header Set For Lotus Elise Exige 06+","description":"\u003cp\u003eRadium engineering Lotus 96-Way PCB header that is found in the 2006-up Lotus Elise\/Exige\/211 T4e ECU. This product allows for a simple wiring harness to be constructed to adapt an engine management system or piggy-back ECU without permanent damage or modification to the factory harness. Pins can be straightened and directly soldered to. These ECU headers are sold as a set.ness\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62765078184266,"sku":"RDE-17-0011","price":76.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/17-0011.jpg?v=1784509635"},{"product_id":"radium-engineering-modular-rear-clam-kit-black-lotus-elise-2zz-ge","title":"Radium Engineering Modular Rear Clam Kit For Black Lotus Elise (2ZZ-GE)","description":"Radium engineering lotus clam kit This kit is designed to make the removal of the 2005+ Lotus Elise rear clamshell quick and easy. The contents of this kit when combined with a few modifications, makes the clamshell removal in less than 10 minutes. With the clamshell off, engine service is performed easily, reducing the labor costs for repair work.\u003cbr\u003eIncluded:\u003cbr\u003e-Billet aluminum decklid hinge brace-4 black anodized laser cut aluminum body shim pads (73% lighter than stock)-4 green anodized aluminum body shim spacers (x4)-2 sets of precut super adhesive nylon hook and loop -Stainless steel hardware-Detailed installation instructions\u003cbr\u003ePart of the modification process is to separate the deck lid hinge mounting points from the firewall. The included hinge brace adds structure back into the hinge support member after the modification is made. The factory steel body shims are taped on to the rear subframe and upper rollbar mount. The aluminum Radium shims bolt in place for a more permanent solution using stainless steel countersink hardware.","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62765078217034,"sku":"RDE-20-0051-01","price":213.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0051.jpg?v=1784509635"},{"product_id":"radium-engineering-fuel-pump-adapter-for-oem-pump-lotus-elise-exige-2zz-ge","title":"Radium Engineering Fuel Pump Adapter For OEM Pump Lotus Elise\/Exige (2ZZ-GE)","description":"Radium Engineering anodized aluminum adapter allows -6AN hose to be used with many OEM Toyota fuel pump housing outlets including Lexus, Scion, and Lotus 2ZZ-GE variations. This 1996 pump module design by Toyota is found on almost every model and is still used currently. We cannot confirm all vehicles so some research many need to be performed by the installer. \u003cbr\u003eNOTE: if the vehicle uses this yellow locking clip shown, chances are this Radium Engineering adapter fitting will be compatible. Toyota Clip P\/N: 77241-32060 is shown above with the Lotus 2ZZ-GE pump module. Toyota Clip P\/N: 77241-33011 is shown below with the Lexus GS300\/Toyota Aristo pump module.\u003cbr\u003eNo modification to the fuel pump housing or vehicle is required. As shown below, the Radium Engineering adapter features an integrated O-ring for a leak-free positive connection. \u003cbr\u003eThe adapter fitting was designed to be ultra low-profile so the -6AN mating hose will have the best chance to fit underneath the OEM fuel pump access cover.","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62765078249802,"sku":"RDE-20-0032","price":43.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0032.jpg?v=1784509636"},{"product_id":"radium-engineering-fuel-pressure-gauge-ptfe-hose-kit-lotus-elise-exige-2zz-ge","title":"Radium Engineering Fuel Pressure Gauge PTFE Hose Kit Lotus Elise\/Exige (2ZZ-GE)","description":"Radium Engineering fuel hose and gauge kit is designed for use on the 2004+ Lotus Elise and Exige with the 2ZZ-GE engine, both supercharged and normally aspirated. This kit replaces the factory fuel hose and connects directly to the OEM 2ZZ-GE fuel rail. All fittings are included for a bolt-on installation. This kit is helpful for tuning or troubleshooting the fuel system on the 2ZZ-GE engine.\u003cbr\u003eThe picture below does not represent the actual hose and gauge, but does show how it installs.\u003cbr\u003eThe stainless steel braided PTFE hose is compatible with all fuel types including E85. PTFE is non-permeable and does not release fuel vapor. The hose ends are anodized aluminum and comes fully assembled. For more information on the included Radium Engineering fuel pressure gauge","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62765078282570,"sku":"RDE-20-0023-01","price":142.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0023-01.jpg?v=1784509637"},{"product_id":"radium-engineering-frame-rail-mount-fuel-surge-tank-kit-fst-not-incl-lotus-elise-exige","title":"Radium Engineering Frame Rail Mount Fuel Surge Tank Kit (FST Not Incl) Lotus Elise\/Exige","description":"Radium Engineering comprehensive installation kit includes everything needed to install a Radium FST-R in 2ZZ-GE powered Lotus Elise\/Exige. The kit locates the FST on the right hand side of the vehicle near the alternator. NOTE: The physical FST-R is sold separately and can be purchased HERE.\u003cbr\u003e\u003cbr\u003e2. If installing the newest Radium FST-R (20-0933), the provided electrical power plug in this install kit will simply need to be cut off and replaced with the ring terminals provided with the new FST-R.\u003cbr\u003e\u003cbr\u003eThe kit was designed for 2004-up Lotus Elise\/Exige models with a nonsupercharged 2ZZ-GE engine. This location is compatible with A\/C equipped cars and is ideal if the clamshell is modular. However, for the OEM supercharged Elise\/Exige, Lotus relocated the emissions charcoal canister to this area. The charcoal canister will have to be removed or relocated. NOTE: Lotus Cup Cars do not use a charcoal canister so this kit is viable. \u003cbr\u003e\u003cbr\u003eThis kit is compliant to be used with all popular alcohol fuels including E85 as ALL factory fuel lines are replaced with high quality -6AN stainless steel wrapped PTFE hose that utilizes a black PCV cover to prevent abrasion.\u003cbr\u003e\u003cbr\u003eIf installing into the rare Lotus Cup Car or Lotus 211, Radium 14-0062 will need to purchased separately to adapt to the larger fuel filler hose associated with these vehicles.\u003cbr\u003e\u003cbr\u003eThis kit is compliant with all popular alcohol fuels including E85. All factory fuel lines are replaced with high quality -6AN PTFE hose. It is also compatible with both the OEM fuel rail as well as a Radium Fuel Rail.\u003cbr\u003e\u003cbr\u003e The install kit is designed to be used with the Radium FST-R which has an integrated fuel pressure regulator built-in. This means that no external regulator needs to be purchased\u003cbr\u003e\u003cbr\u003eINCLUDES\u003cbr\u003e\u003cbr\u003e-Preassembled PTFE hoses with -6AN hose ends \u003cbr\u003e-Anodized Aluminum Fuel Return Adapter\u003cbr\u003e-Nickel Plated Frame Rail Mounting Bracket\u003cbr\u003e-OEM Style and -AN Adapter Fittings\u003cbr\u003e-Stainless Steel Hardware\u003cbr\u003e-Installation Instructions\u003cbr\u003e-Wire Harness with Weather Sealed Relay and Fuse","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62765078315338,"sku":"RDE-20-0013","price":548.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0013.jpg?v=1784509638"},{"product_id":"radium-engineering-coolant-expansion-tank-oem-location-elise-exige-2zz-ge-only-06-11","title":"Radium Engineering Coolant Expansion Tank- OEM location Elise\/Exige 2ZZ-GE Only 06-11","description":"Radium Engineering 20-0270-01 S2 Lotus Elise, Lotus Exige, and Lotus 2-Eleven comes standard with a Denso coolant expansion tank. This is the same plastic tank that is found in the Toyota 2ZZ-GE equipped vehicles. For fitment, Lotus designed a complex bracket that incorporates a mount for the electric hot-soak water pump. There has been cases reported where the Denso tank has failed and owners have found that new replacements are quite expensive. Radium has simplied the Lotus design by making two separate mounts and further improved it using a robust aluminum tank and adapting the factory hoses to -6AN fittings.\u003cbr\u003eThe mount uses all factory threaded mounted holes. Because of this, there is no need to drill or modify anything as it bolts in. Install is a fairly simple process that can be performed by an average mechanic. Everything is accessible with the rear clam intact. Aluminum push lok-hose ends are included to convert the factory coolant hoses into -6AN.\u003cbr\u003eIncludes:\u003cbr\u003e-Billet Aluminum Coolant Tank Anodized Black -Nickel Plated Sight Tube Fittings -Aluminum 6AN Male Adapter Fittings Anodized Black-Aluminum 6AN Hose Ends Anodized Black -Laser Cut Aluminum Tank Bracket Powder Coated Black -Laser Cut Aluminum Hot-Soak Water Pump Bracket Anodized-Rubber Isolation Coolant Tank Grommets -Hot-Soak Water Pump Cushion Clamp -Mounting Hardware\u003cbr\u003eOptions:\u003cbr\u003eThe optional Radium Engineering pressure caps (sold separately) allow the user to select a range of pressure that was not possible with the Denso tank. The purpose of a high pressure cap is to increase the boiling point in the cooling system providing improved cooling efficiency. Each cap is manufactured from stainless steel with a race proven high pressure valve. This is something to consider when tracking the vehicle in extreme conditions\u003cbr\u003eNote: The OEM Lotus pressure cap is 1.1Bar.","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62765078348106,"sku":"RDE-20-0270-01","price":373.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0270-01_0b5576d5-d8ad-4e32-ad4a-8126e6251734.jpg?v=1784509639"},{"product_id":"radium-engineering-coolant-expansion-tank-remote-location-elise-exige-2zz-ge-only-06-11","title":"Radium Engineering Coolant Expansion Tank- Remote Location Elise\/Exige 2ZZ-GE Only 06-11","description":"Radium Engineering remote mounted coolant header tank is commonly required for custom Lotus applications such as engine swaps, turbocharger kits, etc. where the OEM expansion tank is no longer in an ideal location.\u003cbr\u003eThe main tank is a 2-piece design constructed of CNC 6061 billet aluminum, as shown below. The two halves are bolted together along with a CNC billet aluminum cap receiver which mates to any standard 32mm \"Type-A\" style pressure cap\u003cbr\u003eCoolant header tanks are necessary for applications that utilize a low mounted radiator, such as a V-Mount, for proper air bleeding. The Radium Engineering tank also has an internal swirl feature, as shown\u003cbr\u003eINCLUDES\u003cbr\u003e-Billet Aluminum Coolant Tank Anodized Black -Aluminum 6AN Male Adapter Fittings Anodized Black -Nickel Plated Sight Tube Fittings -Billet Aluminum 32mm Pressure Cap Receiver -Billet Aluminum Pressure Bleed Nipple -Laser Cut Aluminum Firewall Mounting Bracket Powder Coated Black -Aluminum and Stainless Steel Mounting Hardware\u003cbr\u003eNOTE: For the Radium Coolant Expansion Tank Kit that fits in the OEM location go HERE.","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62765078380874,"sku":"RDE-20-0270-02","price":340.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0270-02.jpg?v=1784509639"},{"product_id":"radium-engineering-dual-catch-can-kit-fluid-lock-lotus-elise-exige-2zz-ge","title":"Radium Engineering Dual Catch Can Kit Fluid Lock Lotus Elise\/Exige (2ZZ-GE)","description":"Radium Engineering catch cans feature large 10AN ORB ports, a 4AN ORB drain port, 2-step oil separation baffling, and an O-ring sealed dipstick. This dual catch can kit is designed for the 2ZZ-GE equipped Lotus Elise and Exige (supercharged and normally aspirated) models. It includes a specialized mounting bracket as well as all necessary hoses, fittings and hardware.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003e\u003cbr\u003e-Effectively raises the octane and increases engine performance\u003cbr\u003e-Prevents oil buildup in the entire intake system\u003cbr\u003e-Excessive oil collection is an indicator of a damaged engine\u003cbr\u003e-Lowers hydrocarbon emissions \u003cbr\u003e-Capacity: 7 fluid ounces each \u003cbr\u003e-Height (without fittings): 5 inches \u003cbr\u003e-Outside Diameter: 2.45 inches\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eINCLUDES\u003cbr\u003e\u003cbr\u003e-Anodized and Etched Aluminum Catch Cans\u003cbr\u003e-Anodized Aluminum -AN ORB Fittings\u003cbr\u003e-Anodized PushLok -AN Hose Ends    \u003cbr\u003e-Anodized -AN ORB Bottom Plugs\u003cbr\u003e-Anodized Laser Cut Mounting Bracket\u003cbr\u003e-Stainless Steel Oil Separating Media\u003cbr\u003e-PCV Compliant Rubber Hoses \u003cbr\u003e-OEM Style Spring Clamps \u003cbr\u003e-Stainless Steel Hardware","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62765078413642,"sku":"RDE-20-0019-FL","price":427.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0019.jpg?v=1784509640"},{"product_id":"radium-engineering-aftermarket-configuration-fuel-rail-kit-lotus-with-2zz-ge","title":"Radium Engineering Aftermarket Configuration Fuel Rail Kit Lotus with 2ZZ-GE","description":"Radium Engineering high volume fuel rail works on all 2ZZ-GE engines. Both ends of the rail are tapped to 8AN ORB female threads. These ports use positive o-ring seals instead of tapered pipe threads which commonly damage aluminum threads and lead to fuel leaks. The center port accommodates the 2ZZ-GE fuel pulse damper (not included) from the OEM fuel rail. This helps alleviate all high frequency pressure fluctuations. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe fuel rail was designed to clear the intercooler mounting boss (Exige-S\/2-Eleven only) as best as possible without sacrificing fuel flow. Some grinding may still be necessary.\u003cbr\u003e\u003cbr\u003eFEATURES\u003cbr\u003e\u003cbr\u003e-Billet aluminum construction\u003cbr\u003e-Anodized surface finish for corrosion resistance \u003cbr\u003e-Stealth laser etched logos pre anodizing  \u003cbr\u003e-End Ports: 3\/4-16 Female Thread (-8AN)  \u003cbr\u003e-Works with factory and aftermarket injectors\u003cbr\u003e-Easily converted to a pressure regulated return system\u003cbr\u003e-Fits under the factory fuel rail cover\u003cbr\u003e-Supercharged Lotus intercooler boss remains functional \u003cbr\u003e\u003cbr\u003eCONFIGURATIONS\u003cbr\u003e\u003cbr\u003e20-0012-01 FUEL RAIL, TOYOTA 2ZZ-GE\u003cbr\u003eThis option includes the fuel rail and mounting hardware. The OEM fuel pulse damper bracket and associated screws are included as well. No fittings are included as shown below.\u003cbr\u003e\u003cbr\u003e20-0012-PK Fuel Rail Plumbing, Toyota 2ZZ-GE\u003cbr\u003eThis kit includes the fuel rail plumbing components shown below, allowing easy hookup with the factory fuel piping.","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62765078446410,"sku":"RDE-20-0012-01","price":241.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0012-01.jpg?v=1784509640"},{"product_id":"radium-engineering-pcv-baffle-plate-oem-configuration-focus-st-13-rs-16-18-mustang-eco-15","title":"Radium Engineering PCV Baffle Plate OEM Configuration For Focus ST 13+ RS 16-18 Mustang Eco 15+","description":"Radium Engineering PCV Baffle Plate mounts to the engine block and replaces the factory plastic PCV plate and valve. Compared to the OEM unit, the CNC machined aluminum Radium Engineering PCV plate features an extra baffle to prevent oil sludge from entering the intake system without restricting air flow. Furthermore, there are two 10AN ORB ports machined above both aluminum baffles. 10AN ORB Adapter Fittings can be found HERE. NOTE: The OEM configuration kit (20-0327-01) is not compatible with all vehicles.\u003cbr\u003e20-0327-01 Ecoboost PCV Baffle Plate, With Fittings\u003cbr\u003eThis kit includes the baffle plate and associated fittings for a plug and play installation. It is compatible with the following vehicles only: \u003cbr\u003e2013+ Ford Focus ST EcoBoost\u003cbr\u003e2016+ Ford Focus RS EcoBoost\u003cbr\u003e2015+ Ford Mustang EcoBoost\u003cbr\u003eNOT COMPATIBLE WITH FORD RANGER\u003cbr\u003e\u003cbr\u003eThis kit integrates perfectly with the OEM PCV tubing or with the Radium catch can kits for EcoBoost engines. Because the OEM Ford PCV valve leaks at all boost levels, this kit includes Radium's own upgraded 10AN ORB PCV Valve which prevents boost from leaking into the crankcase. No permanent vehicle modifications are required. Exact contents of 20-0327-01 are shown in the picture below.\u003cbr\u003eINCLUDED IN 20-0327-01\u003cbr\u003e-Billet Aluminum PCV Plate with Baffles\u003cbr\u003e-Aluminum 10AN ORB PCV Valve\u003cbr\u003e-Aluminum 10AN ORB Plug\u003cbr\u003e-Rubber 3\/8\" PCV Hose\u003cbr\u003e-Spring Hose Clamps x2\u003cbr\u003e-EFI-style Hose Clamp x1\u003cbr\u003e\u003cbr\u003eIMPORTANT: If using with the Radium Engineering Focus RS\/ST catch can kits, select the this option from above.  This will install perfectly with the PCV catch can kit and no other parts are needed. A check valve is not required.","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":62765081198922,"sku":"RDE-20-0327-01","price":164.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/20-0327-01.jpg?v=1784509674"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/collections\/Radium_Engineering.jpg?v=1785350324","url":"https:\/\/sansomsspecialistparts.co.uk\/collections\/radium-engineering.oembed","provider":"Sansoms Specialist Parts","version":"1.0","type":"link"}