{"title":"Oil Coolers","description":null,"products":[{"product_id":"forge-motorsport-engine-oil-cooler-audi-rs4-4-2-b7-06-08","title":"Forge Motorsport Engine Oil Cooler Audi RS4 4.2 B7 06-08","description":"\u003cp\u003eThis kit has been designed to address the weakness of the stock oil cooler – the cooler fitted to your car from Audi is aluminium, but the fittings on the ends of the cooler hoses are steel. The result is corrosion between the two different metals which cracks the fittings over time, causing a slow oil leak that gets worse with age, and eventually ends in a catastrophic failure of the oil cooler lines - and if you are unlucky, the engine too.\u003c\/p\u003e  \u003cp\u003eDue to the corrosion setting in on the lines, they usually cannot be removed from the oil cooler without damaging it. This results in the need for the oil cooler and both lines to be replaced at a cost of over £1100 from the dealer, before you factor in consumables and labour to change the parts.\u003c\/p\u003e  \u003cp\u003eOur solution uses tried and test products. It is a full replacement right from the fitting on the engine block which is precision made from 6082 billet aluminium, and then anodised to prevent any possibility of corrosion.\u003c\/p\u003e  \u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/FMOCRS4.jpg\"\u003e\u003c\/p\u003e  \u003cp\u003eThis fitting leads to -12 AN Hose Technik black anodised aluminium fittings on \u003ca href=\"http:\/\/hosetechnik.com\" target=\"_blank\"\u003eHose Technik\u003c\/a\u003e braided lines with black overbraid.\u003c\/p\u003e  \u003cp\u003eCooling is accomplished by a 19 row \u003ca href=\"http:\/\/www.setrab.com\/\" target=\"_blank\"\u003eSetrab\u003c\/a\u003e oil cooler, the same manufacturer that supplies Audi and several F1 teams, again with a black finish. All the mating parts are similar materials and are tried and tested in Motorsport - there is no fear of corrosion affecting the fittings after a few years of use. The cooler is supported on a laser cut and powder coated frame that also holds the Audi fan control module in place. With everything finished in black, it makes for the ultimate stealth installation and unless you know what you are looking for, you won’t see it.\u003c\/p\u003e  \u003cp\u003eThe original remit of this replacement was to do away with all the troublesome Audi parts, which this kit accomplishes, but by relocating the oil cooler slightly higher than stock, we have also reduced the chances of damage from road debris.\u003c\/p\u003e  \u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Fitting%20FMOCRS4%20jpeg%20.jpg\"\u003e\u003c\/p\u003e  \u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eAll parts needed for installation are included - bolts, nuts, washers, brackets, and full instructions, though you will need up to additional 2 litres of engine oil to account for the loss from removing your old oil cooler, and for filling the new cooler and lines.\u003c\/strong\u003e\u003c\/p\u003e  \u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cimg alt=\"\" lass=\"center-block\" src=\"\/userfiles\/Install%20Levels\/6.jpg\"\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":62759650165066,"sku":"FMOCRS4","price":1134.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/forge-motorsport-engine-oil-cooler-audi-rs4-4-2-b7-06-08-coolers-349_ed51e492-59f5-42f5-9602-033579c2fe9e.webp?v=1784423934"},{"product_id":"forge-motorsport-audi-rs4-oil-cooler-manifold-rs4-4-2-b7-06-08","title":"Forge Motorsport Audi RS4 Oil Cooler Manifold RS4 4.2 B7 06-08","description":"\u003cp\u003eHere we have the Oil Cooler Manifold as seen in our Oil Cooler kit for the Audi RS4 4.2 (B7 2006-2008) - \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Engine_Oil_Cooler_for_the_Audi_RS4_42_B7_20062008--product--1210.html\"\u003eFMOCRS4\u003c\/a\u003e \u003c\/p\u003e  \u003cp\u003eThis Oil Cooler Manifold replaces the OEM part to allow the installation of an aftermarket oil cooler in place of the cooler that comes from the factory. Our Oil Cooler Manifold is machined from 6082 billet aluminium and then anodised black to prevent any possibility of corrosion. The manifold has two AN-12 fittings to allow you to add your own braided lines to suit your specific needs.\u003c\/p\u003e  \u003cp\u003e\u003cimg alt=\"\" src=\"\/userfiles\/Products\/FMRS4OCM\/FMRS4OCM_1_WEB.jpg\"\u003e\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":62759650525514,"sku":"FMRS4OCM","price":157.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/forge-motorsport-audi-rs4-oil-cooler-manifold-4-2-b7-06-08-coolers-497_dbb7dd23-ccb9-40e6-bae0-e40ade31c0b5.webp?v=1784423936"},{"product_id":"tegiwa-setrab-rear-diff-oil-cooler-kit-with-bmw-diff-fittings","title":"Tegiwa Setrab Rear Diff Oil Cooler Kit with BMW Diff Fittings","description":"\u003cp\u003eTEGIWA MOCAL REAR DIFF OIL COOLER KIT WITH BMW DIFF FITTINGS\u003c\/p\u003e","brand":"Tegiwa","offers":[{"title":"13 Row","offer_id":62759839465802,"sku":"T-9410002-13-BMW-10","price":284.76,"currency_code":"GBP","in_stock":true},{"title":"16 Row","offer_id":62759839498570,"sku":"T-9410002-16-BLW-10","price":308.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/tegiwa-setrab-rear-diff-oil-cooler-kit-with-bmw-fittings-coolers-852_53c68450-efcf-47bb-ac2b-33bcbff3c079.webp?v=1784424771"},{"product_id":"mocal-oil-cooler-take-off-bmw-e36-euro-e82-e9x-135-335-e46-m3","title":"Mocal Oil Cooler Take Off BMW E36 Euro E82 E9X 135\/335 E46 M3","description":"DESCRIPTION\u003cbr\u003e This fitting kit allows much more flexibility in the routing of oil cooler lines. Designed to enable you to replace the standard oil cooler \"\"hard lines\"\" which can cause fitment issues for cars with superchargers, Accusumps or aftermarket oil coolers. Supplied in -10JIC fittings with mounting bracket, O-rings, bolt and washer enabling use of -10 flexible piping. We use these on our races cars to either convert to a Mocal cooler or keep the standard cooler and use one of these fittings on both the engine and the OEM oil cooler. \u003cbr\u003e\u003cbr\u003e Fits ; BMW E36 Euro, E82, E9X 135\/335, E46 M3 \u003cbr\u003e\u003cbr\u003e BMW Applications: \u003cbr\u003e\u003cbr\u003e 2008+ E82 BMW 135i 1M Coupe - with factory oil cooler housing \u003cbr\u003e 1992-1998: E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3- Euro oil filter housing (adaptable to US models), Euro oil cooler. \u003cbr\u003e 2001-2006: E46 BMW M3 - US\/Euro oil filter housing, US\/Euro oil cooler. \u003cbr\u003e 2006-2011: E90 BMW 335i 335xi 335i xDrive - Sedan - with factory oil cooler housing. \u003cbr\u003e 2007-2012: E92 BMW 335i 335is 335xi 335i xDrive - Coupe - with factory oil cooler housing. \u003cbr\u003e 2007-2012: E93 BMW 335i - Convertible - with factory oil cooler housing","brand":"Mocal","offers":[{"title":"Default Title","offer_id":62759977451850,"sku":"OCTO17-10","price":49.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/mocal-oil-cooler-take-off-bmw-e36-euro-e82-e9x-135-335-e46-m3-coolers-266_21076d48-e4b0-4e96-94d3-60e4abf442ec.webp?v=1784426383"},{"product_id":"airtec-motorsport-oil-cooler-bmw-m2-m3-m4-g80-g81-g82-g83-g87","title":"Airtec Motorsport Oil Cooler BMW M2 M3 M4 G80 G81 G82 G83 G87","description":"\u003cp\u003eAs part of our expanding BMW product range, AIRTEC Motorsport is proud to launch our oil cooler kit for the\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eG87 M2, G80 M3 and G82 M4 suitable for track or fast road use.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eA direct replacement for the original oil cooler that fits in the same position and utilises the OEM trims and connections, but offers a core increase of 69.3% and a s\u003c\/span\u003eurface area increase of 18.5% to improve cooling.\u003c\/p\u003e \u003cp\u003eFinished in a high-quality black powder coat, its increased efficiency and easy fitment makes it an essential modification for all modified\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eG87 M2, G80 M3 and G82 M4\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003emodels or those looking for a direct replacement for an original tired or damaged oil cooler.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDimensions: \u003c\/strong\u003e\u003cbr\u003eOEM Oil Cooler\u003cbr\u003eWidth: 640mm\u003cbr\u003eHeight: 150mm\u003cbr\u003eDepth: 28mm\u003cbr\u003eCapacity: 2.68 litres\u003cbr\u003eFront Area: 960cm²\u003c\/p\u003e \u003cp\u003eAIRTEC Motorsport Oil Cooler\u003cbr\u003eWidth: 650mm\u003cbr\u003eHeight: 175mm\u003cbr\u003eDepth: 40mm\u003cbr\u003eCapacity: 4.5 litres\u003cbr\u003eFront Area: 1,137cm²\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSpecifically designed kit for the\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eG87 M2, G80 M3 and G82 M4\u003c\/span\u003e \u003c\/li\u003e \u003cli\u003e69.3% increase in overall capacity in comparison to original\u003c\/li\u003e \u003cli\u003e \u003cspan\u003e18.5% increase in s\u003c\/span\u003eurface area for improved cooling\u003c\/li\u003e \u003cli\u003eDirect replacement with no cutting or drilling required\u003c\/li\u003e \u003cli\u003eReduces temperatures on track and road\u003c\/li\u003e \u003cli\u003eHigh-quality powder coat black finish\u003c\/li\u003e \u003cli\u003eComprehensive fitting instructions included\u003c\/li\u003e \u003c\/ul\u003e","brand":"AIRTEC Motorsport","offers":[{"title":"Default Title","offer_id":62763778244938,"sku":"201541","price":549.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/201541-1.jpg?v=1784494282"},{"product_id":"mishimoto-oil-cooler-kit-bmw-e46-m3-01-06","title":"Mishimoto Oil Cooler Kit BMW E46 M3 01-06","description":"\u003cp\u003eThe S54 is an incredible feat of engineering. Smooth power delivery, individual throttle bodies, and an 8,000 rpm redline makes for an unforgettable driving experience. As with any BMW, maintaining optimal oil temperatures is key to extending the life of your vehicle and ensuring that you're getting a driving experience rivaled by very few other vehicles on the road. As many of these vehicles see frequent track time, the team at Mishimoto felt a need to develop a performance oil cooler kit that would not only provide improved durability, but also deliver the efficiency needed for track driving. Our team of engineers developed an extremely efficient core that provides a proven 30 Degrees Fahrenheit (16.7 Degrees) drop in oil temperature. With an increase in core thickness of 110-percent, this oil cooler kit increases your oil capacity by 0.44qt. The oil cooler one piece billet end tanks have been designed for maximum reliability, giving you the confidence you need to push your E46 M3 to the limits.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":62763904729418,"sku":"MMOC-E46-01","price":870.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/mishimoto-oil-cooler-kit-bmw-e46-m3-01-06-coolers-453.webp?v=1784494715"},{"product_id":"airtec-motorsport-dct-cooler-upgrade-bmw-m3-e90-e92-e93-s65","title":"Airtec Motorsport DCT Cooler Upgrade BMW M3 E90 E92 E93 S65","description":"\u003cp\u003eAs part of our expanding BMW product range, AIRTEC Motorsport are proud to launch our uprated DCT and manual gearbox oil cooler for the E9x M3 models, suitable for track or fast road use.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eThe Issue\u003c\/strong\u003e\u003cbr\u003eDuring extended periods of track or even fast road use, particularly for cars with increased power, the DCT’s oil operating temperature can climb too high to offer sufficient cooling protection properties. As a result, there is risk of damaging the transmission, so the car’s ECU will automatically limit the engine’s torque output and put the car into a limp mode. It can even cause permanent damage, if it persistently overheats.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eThe Solution\u003c\/strong\u003e\u003cbr\u003eMaking full use of all the available space behind the bumper, the AIRTEC Motorsport transmission cooler utilises a core design that is a massive\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e218% bigger\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethan standard and\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e91% taller\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ethan original, which equates to a frontal area\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eincrease of 118%\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eto help cool the extra capacity.\u003c\/p\u003e \u003cp\u003eProven to work on track, the AIRTEC Motorsport cooler was tested to offer a huge\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e100% increase\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ein heat rejection, allowing the new cooler to provide improved cooling, preventing the overheating issue.\u003c\/p\u003e \u003cp\u003eThe comprehensive kit also comes with a real carbon fibre air scoop that matches the profile of the new bigger core, as well as an aluminium vent to fit in the inner wheel arch to help extract warm air, creating an improved air flow to further aid cooling the new, larger core design.\u003c\/p\u003e \u003cp\u003eFinished in a high-quality powder-coated black finish, the cooler is a direct replacement fit and comes complete with detailed fitting instructions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTESTED ON TRACK\u003c\/strong\u003e\u003cbr\u003eIn May 2025, we ventured over to the iconic Nürburgring in Germany to complete a two day, back-to-back test in order to collect data as part of the track testing programme for our newly developed E9x M3 cooling package; in particular the engine oil cooler DCT gearbox oil cooler. For this, we used our\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAIRTEC Motorsport\u003c\/strong\u003e demonstrator vehicle, which is equipped with an uprated exhaust system and sports cats, a remap, KW V3 suspension, AP Racing brakes and a semi-slick tyre set up, among other modifications and driven by this season’s\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eTime Attack\u003c\/strong\u003e driver Alan Shepherd.\u003c\/p\u003e \u003cp\u003eThe first day would entail a day of data logging with the standard coolers in place, before swapping over to our\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAIRTEC Motorsport\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ecoolers for the next day and repeating the same process.\u003c\/p\u003e \u003cp\u003eOn the first day we saw that as the day went on the gearshifts started to slow down and we experienced on one occasion downshifting to third gear for it not to respond first time, so decided to take the rest of the lap to cool down before causing any lasting damage to the transmission.\u003c\/p\u003e \u003cp\u003eWhen looking at the data gathered from the oil temperature sensors we had installed in the inlet and outlet of the DCT cooler, we noticed the standard DCT oil cooler had an overall maximum thermal efficiency of just\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e16%\u003c\/strong\u003e, removing just 12 degrees of heat, whereas the AIRTEC Motorsport DCT oil cooler measured\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e36%\u003c\/strong\u003e by removing up to 24 degrees of temperature from the gearbox oil in comparison, which is an impressive\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e100%\u003c\/strong\u003e more than the standard oil cooler was able to do.\u003c\/p\u003e \u003cp\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=pxJ-3A6Gu5k\u0026amp;t=151s\"\u003e\u003cstrong\u003e\u003cu\u003eFULL VIDEO OF THE TESTING AVAILABLE ON OUR YOUTUBE CHANNEL HERE\u003c\/u\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cimg decoding=\"async\" src=\"http:\/\/www.airtecmotorsport.com\/wp-content\/uploads\/sites\/4\/2025\/10\/Screenshot-2025-10-20-145402.jpg\" width=\"567\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDimensions: \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eOEM DCT Cooler\u003c\/strong\u003e\u003cbr\u003eHeight: 120mm\u003cbr\u003eWidth: 220mm\u003cbr\u003eDepth: 28mm\u003cbr\u003eVolume: 0.73-litres\u003cbr\u003eFrontal area: 264cm²\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAIRTEC Motorsport DCT Cooler\u003c\/strong\u003e\u003cbr\u003eHeight: 230mm\u003cbr\u003eWidth: 250mm\u003cbr\u003eDepth: 41mm\u003cbr\u003eVolume: 2.35-litres\u003cbr\u003eFrontal area: 575cm²\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eComprehensive kit designed specifically for the E9x M3 platform – fits both DCT and manual cars\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003e218% larger\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ecore compared to standard DCT cooler\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003e118% increase\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ein frontal area compared to standard DCT cooler\u003c\/li\u003e \u003cli\u003eImproved capacity and oil cooling ability\u003c\/li\u003e \u003cli\u003eProven to work; tested on track with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e100%\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eheat rejection improvement\u003c\/li\u003e \u003cli\u003eGenuine carbon fibre scoop to improve air flow into the cooler\u003c\/li\u003e \u003cli\u003eAluminium vent to improve air flow out of the cooler\u003c\/li\u003e \u003cli\u003eDirect replacement that fits in original location\u003c\/li\u003e \u003cli\u003eEasiest to fit kit on the market\u003c\/li\u003e \u003cli\u003eFeatures detailed fitting guide\u003c\/li\u003e \u003c\/ul\u003e","brand":"AIRTEC Motorsport","offers":[{"title":"Default Title","offer_id":62763907088714,"sku":"ATMSBMW18","price":795.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/ATMSBMW18-1.jpg?v=1784494730"},{"product_id":"airtec-motorsport-oil-cooler-bmw-e9x-e92-m3","title":"Airtec Motorsport Oil Cooler BMW E9x E92 M3","description":"\u003cp\u003eAs part of our expanding BMW product range, AIRTEC Motorsport is proud to launch our replacement oil cooler kit for the E90, E92 and E93 M3 models, suitable for track or fast road use.\u003c\/p\u003e \u003cp\u003eWith huge experience in developing external oil cooler packages for a variety of modified track and road cars, we chose to create a direct replacement oil cooler with a larger core to make the most of the space available in the original location. \u003c\/p\u003e \u003cp\u003eAs a result, our kit\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eoffers a huge capacity increase as well as improved cooling, thanks to a core that measures 79% bigger\u003cstrong\u003e \u003c\/strong\u003ethan the standard BMW oil cooler together with an increased frontal area of 17% over standard, which means there is more air flow passing through the core to help cool it. \u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eThe oil cooler attaches to the original oil lines and is supplied with new O-rings and replacement bolts as well as detailed fitting instructions for a simple installation process.  \u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eComprehensive kit designed specifically for the E9x M3 platform\u003c\/li\u003e \u003cli\u003e79% larger core compared to standard \u003c\/li\u003e \u003cli\u003e17% increase in frontal area compared to standard\u003c\/li\u003e \u003cli\u003eImproved capacity and oil cooling ability\u003c\/li\u003e \u003cli\u003eDirect replacement that fits in original location\u003c\/li\u003e \u003cli\u003eReuses original oil line fittings\u003c\/li\u003e \u003cli\u003eIncludes new O-rings and fixtures \u003c\/li\u003e \u003cli\u003eFeatures detailed fitting guide\u003c\/li\u003e \u003c\/ul\u003e","brand":"AIRTEC Motorsport","offers":[{"title":"Plain","offer_id":62763907121482,"sku":"ATMSBMW17-PLAIN","price":495.0,"currency_code":"GBP","in_stock":true},{"title":"With Logo","offer_id":62763907154250,"sku":"ATMSBMW17-LOGO","price":495.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/airtec-motorsport-oil-cooler-bmw-e9x-e92-m3-coolers-859.webp?v=1784494730"},{"product_id":"tegiwa-bmw-rear-diff-oil-cooler-bung-port-kit","title":"Tegiwa BMW Rear Diff Oil Cooler Bung Port Kit","description":"\u003cp\u003eTEGIWA BMW REAR DIFF OIL COOLER BUNG PORT KIT\u003c\/p\u003e","brand":"Tegiwa","offers":[{"title":"Default Title","offer_id":62763923865930,"sku":"TE-BMW-DIFF-AN8","price":34.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/tegiwa-bmw-rear-diff-oil-cooler-bung-port-kit-coolers-743.webp?v=1784494764"},{"product_id":"mishimoto-oil-cooler-bmw-f8x-m3-m4-15-20","title":"Mishimoto Oil Cooler BMW F8X M3 M4 15-20","description":"\u003cp\u003eAdd some much needed durability and cooling power to your M3 or M4 with the Mishimoto 2015-2020 BMW M3\/M4 Performance Oil Cooler. True to form, the engineers at BMW designed the M3\/M4's oil cooler with an efficient use of space in mind. Suspended perpendicular from the rest of the cooling stack, this location utilizes the Bimmer's aerodynamics in order to cool the oil, all while putting the light weight, tube-and-fin cooler in harms way of road hazards.  We here at Mishimoto made sure to beef up the oil cooler design for the F80\/82 with our performance oil cooler. We ditched the lightweight design for a full aluminum, TIG-welded bar-and-plate cooler for added strength and cooling. The bars and plates are a much more robust form of heat exchanger core construction intended for improved heat transfer and have the strength to shrug off potential road debris, keeping your oil temps down, and where It'should be. We also added 10mm to the core?s thickness, equating in a 46-percent increase in core volume and increased the oil capacity by .4 qt.  The Mishimoto 2015-2020 BMW M3\/M4 Performance Oil Cooler fits directly in place of the stock unit, and includes the Mishimoto Lifetime Warranty for a simplified and worry-free installation.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":62763992088906,"sku":"MMOC-F80-15","price":513.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/mishimoto-oil-cooler-bmw-f8x-m3-m4-15-20-coolers-338.webp?v=1784494969"},{"product_id":"mishimoto-oil-cooler-kit-bmw-f8x-m3-m4-15-20","title":"Mishimoto Oil Cooler Kit BMW F8X M3 M4 15-20","description":"\u003cp\u003eAdd some much-needed durability and cooling power to your M3 or M4 with the Mishimoto 2015-2020 BMW M3\/M4 Oil Cooler kit. True to form, the BMW engineers designed the M3\/M4's oil cooler with efficient space use in mind. Suspended perpendicular from the rest of the cooling stack, this location utilizes the Bimmer's aerodynamics in order to cool the oil, all while putting the lightweight, tube-and-fin cooler in harm's way of road hazards.  We here at Mishimoto made sure to beef up the entire oil cooling system design for the F80\/82 with our performance oil cooler. We ditched the lightweight design for a full aluminum, TIG-welded bar-and-plate cooler for added strength and cooling. The bars and plates are a much more robust form of heat exchanger core construction intended for improved heat transfer and have the strength to shrug off potential road debris, keeping your oil temps down and where it should be. We also added 10mm to the core's thickness, equating in a 46-percent increase in core volume, and increased the oil capacity by .4 qt.  In addition we wanted to add an extra degree of protection to the system by improving on the lines. From the factory, these vehicles are equipped with unforgiving hardlines that are prone to abrasion and corrosion damage. Our oil cooler kit provides a pair of application-specific, flexible, and robust nylon braided lines for a more secure channel for your M's oil. Also included are our specially designed adaptors allowing for AN fittings from the S55's oil pump and a secure connection to the oil cooler.The Mishimoto 2015-2020 BMW M3\/M4 Oil Cooler Kit fits directly in place of the stock unit, and includes the Mishimoto Lifetime Warranty for a simplified and worry-free installation.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":62764041732426,"sku":"MMOC-F80-15K","price":829.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/mishimoto-oil-cooler-kit-bmw-f8x-m3-m4-15-20-coolers-974.webp?v=1784495056"},{"product_id":"mishimoto-performance-oil-cooler-bmw-e60-m5-e63-m6-e64-m6-06-10","title":"Mishimoto Performance Oil Cooler BMW E60 M5 E63 M6 E64 M6 06-10","description":"\u003cp\u003eThe 2006-2010 BMW E60 M5 combines the spacious practicality of a four-door sedan with a naturally aspirated V10 powerplant producing a hypnotic soundtrack of intake\/exhaust noise. But after over a decade of use, some of the E60's components have begun to show their age. The factory engine oil cooler is a common leak point on the E60, typically from failed O-rings or cracked weld points. In addition, the location of the front-mounted cooler increases the chance of damage from road debris and general clogging of external fins, resulting in reduced cooling efficiency. That, combined with the high-strung engine and hefty chassis, means oil temperatures tend to rise during aggressive driving. That's why our engineering team set out to remedy both issues with this performance oil cooler.   Drawing on our vast experience with BMW's and the latest in engineering tools, our team was able to create a direct-fit replacement oil cooler with substantial improvements in both durability and cooling efficiency. The Mishimoto Performance Oil Cooler features a robust bar-and-plate core, which provides improved durability and aids in heat rejection. Our core utilizes a strategic fin design which provides a 41-percent increase in external fin surface area and a 30-percent increase in internal fin surface area to help draw heat out of the oil and dissipate it into the air. Our oil cooler features CNC-machined inlet\/outlet ports and includes new OEM O-rings for a seamless and leak-free installation. This cooler is finished in a silver powder coat, ensuring long term durability and corrosion resistance. And, as with all our BMW performance products, this oil cooler includes our signature Mishimoto Lifetime Warranty.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":62764073091402,"sku":"MMOC-E60-06","price":602.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/mishimoto-performance-oil-cooler-bmw-e60-m5-e63-m6-e64-06-10-coolers-651.webp?v=1784495262"},{"product_id":"mishimoto-performance-oil-cooler-bmw-m5-m6-12","title":"Mishimoto Performance Oil Cooler BMW M5 M6 12+","description":"\u003cp\u003eThe BMW M5 power and handling statistics are completely mind-blowing for a car tipping the scales at well over two tons. The S63 twin-turbo V8 is underrated from the factory and responds well to tuning and bolt on modifications. Calling it the ultimate super sedan would not do this car justice, it’s just that good. But every amazing automobile must have an Achilles’ heel, right? Some investigation into this model told us that enthusiasts were seeing elevated oil temperatures during track driving conditions. Our team set out to create a replacement, high-performance oil cooler that could handle the rigors of extreme driving conditions and the abuse of daily commuting.  The Mishimoto S63 M5\/M6 oil cooler features extremely precise CNC-machined billet-aluminum end tanks which are professionally TIG-welded to our robust bar-and-plate core. Our strategically designed 55mm-thick core provides a massive 24% increase in core volume, and a 40% increase in external fin surface area. This added surface area promotes greater heat transfer, which directly impacts internal fluid temperatures. Our performance oil cooler is a complete bolt-on solution that includes everything needed for an easy installation such as hardware and replacement O-rings for the oil lines. Our heat exchanger is finished in a durable silver powder coat, providing both corrosion resistance and improved aesthetics.  Whether your M5 sees frequent track time or just the occasional back-road jaunt, upgrading the oil cooler is a great way to extend the life of your S63 and ensure maximum engine output when you need it most. As with all our BMW products, this oil cooler includes our signature Mishimoto Lifetime Warranty.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":62764090622282,"sku":"MMOC-F10-12SL","price":747.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/mishimoto-performance-oil-cooler-bmw-m5-m6-12-coolers-130.webp?v=1784495288"},{"product_id":"airtec-motorsport-oil-cooler-kit-ford-fiesta-st-180-mk7-13-17","title":"Airtec Motorsport Oil Cooler Kit Ford Fiesta ST 180 MK7 13-17","description":"\u003cp\u003eAIRTEC Motorsport are proud to offer the oil cooler kit for the Fiesta ST 180. Long overdue but its been worth the wait, making every part of our AIRTEC Motorsport oil cooler kit unique and finished to a stunning level of quality. Grill mounted to achieve maximum cold airflow and fits either side of grill as not to affect cold air feed for air filters.\u003c\/p\u003e \u003cp\u003eKit Includes:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e13 row high performance AIRTEC motorsport oil cooler\u003c\/li\u003e \u003cli\u003eAeroquip 90 degree Black anodised fittings with Black Pro-Lite Oil hose\u003c\/li\u003e \u003cli\u003eBillets anodised Black hose line separators x 4\u003c\/li\u003e \u003cli\u003eGearbox mounted hose securing bracket finished in ProSeries Black\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eDesigned to fit with AIRTEC stage 3 intercooler \u0026amp; supplied with a bracket for cars running standard or other aftermarket intercooler! Today s high performance vehicles pack a lot of power in a smaller package. In order to save both weight and space, the typical OEM cooling system is designed for normal driving conditions. When driven hard for extended periods, the cooling system may prove less than adequate. AIRTEC offers the solution to marginal cooling systems race proven lightweight and efficient oil coolers designed to fit in the smallest practical space.\u003c\/p\u003e","brand":"AIRTEC Motorsport","offers":[{"title":"Plain - No Logo \/ Without Thermostat Housing","offer_id":62764263014730,"sku":"ATOILF04-NL","price":376.5,"currency_code":"GBP","in_stock":true},{"title":"Black Airtec Logo \/ Without Thermostat Housing","offer_id":62764263047498,"sku":"ATOILF04-BLCK","price":376.5,"currency_code":"GBP","in_stock":true},{"title":"Blue Airtec Logo \/ Without Thermostat Housing","offer_id":62764263080266,"sku":"ATOILF04-BLU","price":376.5,"currency_code":"GBP","in_stock":true},{"title":"Red Airtec Logo \/ Without Thermostat Housing","offer_id":62764263113034,"sku":"ATOILF04-RED","price":376.5,"currency_code":"GBP","in_stock":true},{"title":"White Airtec Logo \/ Without Thermostat Housing","offer_id":62764263145802,"sku":"ATOILF04-WHI","price":376.5,"currency_code":"GBP","in_stock":true},{"title":"Yellow Airtec Logo \/ Without Thermostat Housing","offer_id":62764263178570,"sku":"ATOILF04-YEL","price":376.5,"currency_code":"GBP","in_stock":true},{"title":"Orange Airtec Logo \/ Without Thermostat Housing","offer_id":62764263211338,"sku":"ATOILF04-ORA","price":376.5,"currency_code":"GBP","in_stock":true},{"title":"Green Airtec Logo \/ Without Thermostat Housing","offer_id":62764263244106,"sku":"ATOILF04-GRE","price":376.5,"currency_code":"GBP","in_stock":true},{"title":"Grey Airtec Logo \/ Without Thermostat Housing","offer_id":62764263276874,"sku":"ATOILF04-GRY","price":376.5,"currency_code":"GBP","in_stock":true},{"title":"Pink Airtec Logo \/ Without Thermostat Housing","offer_id":62764263309642,"sku":"ATOILF04-PI","price":376.5,"currency_code":"GBP","in_stock":true},{"title":"Purple Airtec Logo \/ Without Thermostat Housing","offer_id":62764263342410,"sku":"ATOILF04-PUR","price":376.5,"currency_code":"GBP","in_stock":true},{"title":"Plain - No Logo \/ With Thermostat Housing","offer_id":62764263375178,"sku":"ATOILF04-NL-HOUSING","price":440.32,"currency_code":"GBP","in_stock":true},{"title":"Black Airtec Logo \/ With Thermostat Housing","offer_id":62764263407946,"sku":"ATOILF04-BLCK-HOUSING","price":440.32,"currency_code":"GBP","in_stock":true},{"title":"Blue Airtec Logo \/ With Thermostat Housing","offer_id":62764263440714,"sku":"ATOILF04-BLU-HOUSING","price":440.32,"currency_code":"GBP","in_stock":true},{"title":"Red Airtec Logo \/ With Thermostat Housing","offer_id":62764263473482,"sku":"ATOILF04-RED-HOUSING","price":440.32,"currency_code":"GBP","in_stock":true},{"title":"White Airtec Logo \/ With Thermostat Housing","offer_id":62764263506250,"sku":"ATOILF04-WHI-HOUSING","price":440.32,"currency_code":"GBP","in_stock":true},{"title":"Yellow Airtec Logo \/ With Thermostat Housing","offer_id":62764263539018,"sku":"ATOILF04-YEL-HOUSING","price":440.32,"currency_code":"GBP","in_stock":true},{"title":"Orange Airtec Logo \/ With Thermostat Housing","offer_id":62764263571786,"sku":"ATOILF04-ORA-HOUSING","price":440.32,"currency_code":"GBP","in_stock":true},{"title":"Green Airtec Logo \/ With Thermostat Housing","offer_id":62764263604554,"sku":"ATOILF04-GRE-HOUSING","price":440.32,"currency_code":"GBP","in_stock":true},{"title":"Grey Airtec Logo \/ With Thermostat Housing","offer_id":62764263637322,"sku":"ATOILF04-GRY-HOUSING","price":440.32,"currency_code":"GBP","in_stock":true},{"title":"Pink Airtec Logo \/ With Thermostat Housing","offer_id":62764263670090,"sku":"ATOILF04-PI-HOUSING","price":440.32,"currency_code":"GBP","in_stock":true},{"title":"Purple Airtec Logo \/ With Thermostat Housing","offer_id":62764263702858,"sku":"ATOILF04-PUR-HOUSING","price":440.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/airtec-motorsport-oil-cooler-kit-ford-fiesta-st-180-mk7-13-17-coolers-926.webp?v=1784495914"},{"product_id":"mishimoto-oil-cooler-kit-ford-fiesta-mk7-st180-13-17","title":"Mishimoto Oil Cooler Kit Ford Fiesta MK7 ST180 13-17","description":"\u003cp\u003eTurbocharged, high stress 4 cylinder engines like the 1.6L EcoBoost engine in the Fiesta ST can overheat their oil very quickly within a few laps on the track or aggressive street driving. Even with the stock liquid-to- liquid heat exchanger, the engine can still run very hot and run the risk of overheating the engine's coolant as well. Aggressive tunes and some track miles can significantly overheat your oil and wear down your engine. Leave it to Mishimoto to come up with an oil cooling solution for your Fiesta ST! Mishimoto engineers started with a large 19-row oil cooler and mounted it in the front of the vehicle where it receives the most airflow. The oil cooler was designed to bypass the stock liquid to liquid oil cooler in order to get the best possible oil temperature reduction. A new CNC center bolt and aluminum coolant bypass tube are provided to easily eliminate the stock oil cooler unit. Application specific braided stainless steel lines transfer oil from the cooler to the engine and feature -10AN fittings for an easy installation. Mishimoto engineers saw consistent temperature decreases of over 35 F (19.5 C) using our non-thermostatic sandwich plate. Proving that this oil cooler kit can wIt'stand the stresses of the most extreme applications. This oil cooler kit is available with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Non-Thermostatic \/ Silver Cooler","offer_id":62764268224842,"sku":"MMOC-FIST-14","price":705.45,"currency_code":"GBP","in_stock":true},{"title":"Non-Thermostatic \/ Black Cooler","offer_id":62764268257610,"sku":"MMOC-FIST-14BK","price":709.15,"currency_code":"GBP","in_stock":true},{"title":"Thermostatic \/ Silver Cooler","offer_id":62764268290378,"sku":"MMOC-FIST-14T","price":768.72,"currency_code":"GBP","in_stock":true},{"title":"Thermostatic \/ Black Cooler","offer_id":62764268323146,"sku":"MMOC-FIST-14TBK","price":765.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/mishimoto-oil-cooler-kit-ford-fiesta-mk7-st180-13-17-non-thermostatic-silver-coolers-139.webp?v=1784495960"},{"product_id":"tegiwa-setrab-oil-cooler-kit-honda","title":"Tegiwa Setrab\/Mocal Oil Cooler Kit HONDA","description":"\u003cp\u003eTEGIWA Oil Cooler kit. Features only the best quality parts. Coolers are either Setrab or Mocal (depending on stock) and sandwich plates are manufactured by Mocal, the universal fitting kit is manufactured right here in the UK and it comes complete with high quality AN fittings and braided hose. They are available with either a normal sandwich plate or a thermostatic sandwich plate. Choose from 13, 16, 19 and a 25 row kit. The kit is a universal fitment, but with the fitting kit it should be easy to mount on all cars.\u003c\/p\u003e","brand":"Tegiwa","offers":[{"title":"13 \/ Normal","offer_id":62764329402698,"sku":"T-4077141-13","price":221.76,"currency_code":"GBP","in_stock":true},{"title":"16 \/ Normal","offer_id":62764329435466,"sku":"T-4077141-16","price":242.55,"currency_code":"GBP","in_stock":true},{"title":"19 \/ Normal","offer_id":62764329468234,"sku":"T-4077141-19","price":263.34,"currency_code":"GBP","in_stock":true},{"title":"25 \/ Normal","offer_id":62764329501002,"sku":"T-4077141-25","price":284.13,"currency_code":"GBP","in_stock":true},{"title":"13 \/ Thermostatic","offer_id":62764329533770,"sku":"T-4077141-13T","price":249.48,"currency_code":"GBP","in_stock":true},{"title":"16 \/ Thermostatic","offer_id":62764329566538,"sku":"T-4077141-16T","price":270.27,"currency_code":"GBP","in_stock":true},{"title":"19 \/ Thermostatic","offer_id":62764329599306,"sku":"T-4077141-19T","price":291.06,"currency_code":"GBP","in_stock":true},{"title":"25 \/ Thermostatic","offer_id":62764329632074,"sku":"T-4077141-25T","price":311.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/tegiwa-setrab-mocal-oil-cooler-kit-honda-13-normal-coolers-946.webp?v=1784498445"},{"product_id":"mocal-thermostatic-oil-cooler-sandwich-plate-honda","title":"Mocal Thermostatic Oil Cooler Sandwich Plate Honda","description":"\u003cp\u003eOpens at 80°C\u003c\/p\u003e \u003cp\u003eMOCAL Thermo Plate. Mocal oil cooler sandwich plate\/block with integral thermostat. Sandwich plate designed for use with spin-on type oil filters with a sealing face correct for Honda engines. Comes complete with sealing ring and centre bolt to mount it to Honda engines.\u003c\/p\u003e","brand":"Mocal","offers":[{"title":"Default Title","offer_id":62764337332554,"sku":"OTSPIF-M22","price":76.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/mocal-thermostatic-oil-cooler-sandwich-plate-honda-coolers-342.webp?v=1784498566"},{"product_id":"t7design-oil-cooler-sandwich-plate-non-thermostatic-honda-k-series-k20-k24","title":"T7Design Oil Cooler Sandwich Plate (Non-Thermostatic) Honda K-Series K20 K24","description":"\u003ch3 class=\"desktop\"\u003e7DD-12C-EE6 - T7Design K20\/K24 Honda Oil Cooler Sandwich Plate AN10 (Non-Thermostatic)\u003c\/h3\u003e \u003cp\u003eThe T7Design K20\/K24 Oil Cooler Sandwich plate has been designed as a direct replacement for the OEM Honda oil cooler doughnut for applications where a greater amount of oil cooling is required, it has been designed to utilise the stock centre bolt and works with the OEM Honda oil filter. On the front, two AN10 Male adapters are included to run rubber or braided hose off to your cooler, they are also offset just the right amount so that in tight spaces two 90 degree AN Fittings sit as close as possible to the timing chain cover and protrude no further than the crank pulley, this ensures there will be no clearance issues on even the tightest K-swap engine bays! On the opposite side of our sandwich plate, we have integrated two ORB08 ports to utilise our bespoke adapters for accessories such as temperature senders, pressure sensors, oil feed take off's for Turbo's or to plumb in an Accusump system.\u003c\/p\u003e \u003cp\u003ePlease note that the non-thermostatic version of our sandwich plate is only compatible with the following scenarios':\u003c\/p\u003e \u003cp\u003e\u003cb\u003eOil to Air Cooler:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eIf you are running this kind of cooler, you will also need to run a remote inline thermostatic unit to bypass the oil cooler until the prescribed oil temperature is reached. Failure to do so will result in the oil potentially never reaching the correct operating temperature.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eOil to Water Cooler:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eIdeal for road car applications, an oil to water cooler does not need a thermostatic control device as the engine's coolant will regulate both minimum and maximum temperatures. For track use or turbo applications a larger than stock Oil to Water cooler will be desired.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cul class=\"text-list\"\u003e \u003cli\u003eManufactured from high quality billet aluminium.\u003c\/li\u003e \u003cli\u003eMedia blasted and Hard Anodised black for superior finish and surface protection.\u003c\/li\u003e \u003cli\u003eDesigned using a high-resolution scan of the K20 engine and OEM parts to ensure perfect fitment.\u003c\/li\u003e \u003cli\u003e2x AN10 Outlets for oil in\/out to cooler.\u003c\/li\u003e \u003cli\u003e2x ORB08 universal ports for optional sensors or turbo feed take off's.\u003c\/li\u003e \u003cli\u003eUses OEM Honda O-Ring.\u003c\/li\u003e \u003cli\u003eUses OEM Honda centre bolt.\u003c\/li\u003e \u003cli\u003eUses OEM Honda Filter.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cbr\u003e\u003c\/p\u003e \u003ctable class=\"tseven\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd width=\"25%\"\u003e\u003cb\u003eOptional Port Adapters\u003c\/b\u003e\u003c\/td\u003e \u003ctd width=\"75%\"\u003e\u003cb\u003eFunction\u003c\/b\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eORB08 to AN04\u003c\/td\u003e \u003ctd\u003eTake-off for Turbo Oil Feed\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eORB08 to 1\/8\" NPT\u003c\/td\u003e \u003ctd\u003eCommon Imperial thread size for oil temp sensors and pressure sensors\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eORB08 to M10x1.0\u003c\/td\u003e \u003ctd\u003eMachined with the specific conical seat for the Bosch Dual Pressure\/Temp Sensor only\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eORB08 to M12x1.5\u003c\/td\u003e \u003ctd\u003eCommon Metric thread size for oil temp sensors and pressure sensors\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eORB08 to AN08\u003c\/td\u003e \u003ctd\u003eFeed for Accusump or other oil accumulator systems**\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003cp\u003e** If using an Accusump Oil Accumulator system the feed needs to attach to the oil cooler return half of the sandwich plate, this will be the side with the arrows facing into the centre. **\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e\u003c\/p\u003e \u003ctable class=\"tseven\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd width=\"25%\"\u003e\u003cb\u003eSpecification\u003c\/b\u003e\u003c\/td\u003e \u003ctd width=\"75%\"\u003e\u003cb\u003eMetric\u003c\/b\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eMaterial\u003c\/td\u003e \u003ctd\u003e6061-T6 Aluminium Alloy\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eFinish\u003c\/td\u003e \u003ctd\u003eMedia Blast \u0026amp; Hard Anodised Black\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eManufacturer\u003c\/td\u003e \u003ctd\u003eT7Design Ltd\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003cdiv class=\"block-header\"\u003eKit Contents\u003c\/div\u003e \u003ctable class=\"tseven\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd width=\"25%\"\u003e\u003cb\u003eQuantity\u003c\/b\u003e\u003c\/td\u003e \u003ctd width=\"75%\"\u003e\u003cb\u003eDescription\u003c\/b\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e1x\u003c\/td\u003e \u003ctd\u003eK20\/K24 Oil Cooler Sandwich Plate\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e1x\u003c\/td\u003e \u003ctd\u003eMain O-Ring\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e2x\u003c\/td\u003e \u003ctd\u003eORB10 to AN10 Fittings\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e2x\u003c\/td\u003e \u003ctd\u003eOptional Adapters chosen during checkout\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e","brand":"T7Design","offers":[{"title":"Default Title","offer_id":62764438421834,"sku":"T7-OCSP-K20-K24-NT","price":140.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/T7-OCSP-K20-K24-NT-1.jpg?v=1784499964"},{"product_id":"genuine-honda-oil-cooler-centre-bolt-s2000-ap1-ap2-civic-type-r-ep3-01-05","title":"Genuine Honda Oil Cooler Centre Bolt S2000 AP1 AP2 Civic Type-R EP3 01-05","description":"\u003cp\u003eHONDA Oil Cooler Bolt. As with all genuine Honda parts expect a perfect fit and performance every time. Part number: 15560-PCX-004\u003c\/p\u003e","brand":"Genuine Honda","offers":[{"title":"Default Title","offer_id":62764583977290,"sku":"15560-PCX-004","price":20.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/genuine-honda-oil-cooler-centre-bolt-s2000-ap1-ap2-civic-type-r-ep3-01-05-coolers-683.webp?v=1784501905"},{"product_id":"hel-oil-cooler-kit-honda-civic-type-r-fk2-15-17","title":"HEL Oil Cooler Kit Honda Civic Type R FK2 15-17","description":"\u003cp\u003eAfter the success of our last development work on the latest exciting Japanese pocket rocket, the GR Yaris, we were really keen to look back on another one which would benefit from the same treatment, given how little on the market there was for it. As luck would have it, our old FK2 is now owned by an ex-employee locally, so it seemed sense to borrow that to do our development work.\u003c\/p\u003e \u003cp\u003eAgain we knew that we wanted to create an easy to fit oil cooler kit, so we 3D scanned the engine bay to find the best solution. As a result, we manufactured 2 custom aluminium brackets to mount the oil cooler on the crash bar. The cooler then sits in direct air flow in the space between the 2 headlights, the perfect location for effective cooling.\u003c\/p\u003e \u003cp\u003eWe based the kit around the popular Swedish-manufactured Setrab Series 6 ProLine oil cooler. The 19 row fits perfectly in the space we had to use and gives a great balance between minimising pressure loss while giving very effective cooling.\u003c\/p\u003e \u003cp\u003eWe've been using Setrab oil coolers for over 10 years without any issues and their performance is unrivalled. There are lots of cheaper imported options available, but none as reliable (there aren't many things worse than having a burst oil cooler!). In fact, we've had reports of front end collisions and the Setrab oil cooler was the only thing that still worked!\u003c\/p\u003e \u003cp\u003eThis comprehensive kit arrives with preassembled HEL braided hoses and anodised aluminium fittings. These AN10 high flow performance hoses deliver and return oil from the oil cooler to a non-thermostatic sandwich plate and a crash bar mounted inline thermostat, set at 92°C (197.6°F). (A full diagram showing exactly where to mount the thermostat and brackets for the cooler is included in the kit). We've found the 92°C option gives you the perfect balance between cooling when needed and letting the engine warm up safely. It's also dangerous for the oil to be too cold and the thermostat controls the temperature with precision.\u003c\/p\u003e \u003cp\u003eThis direct-fit kit offers a safe and reliable cooling system for the FK2 which is known to suffer heat issues on track. It comes complete with easy-to-understand instructions and our technical support team are always happy to answer any questions you may have.\u003c\/p\u003e \u003cp\u003eWhat's Included\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSetrab Series 6 ProLine 19 row oil cooler with AN10 banjo adapters.\u003c\/li\u003e \u003cli\u003eHEL custom aluminium mounting bracket.\u003c\/li\u003e \u003cli\u003e92°C thermostatic oil filter sandwich plate.\u003c\/li\u003e \u003cli\u003ePreassembled AN10 HEL braided hoses with anodised aluminium fittings (heat sleeve optional).\u003c\/li\u003e \u003cli\u003eStainless steel mounting hardware.\u003c\/li\u003e \u003cli\u003eInstallation instructions.\u003c\/li\u003e \u003c\/ul\u003e","brand":"HEL","offers":[{"title":"Black Nylon Cotton Braided","offer_id":62764644204874,"sku":"HEL-HOCK-HON-005-BNCB","price":631.19,"currency_code":"GBP","in_stock":true},{"title":"Stainless Steel Braided","offer_id":62764644237642,"sku":"HEL-HOCK-HON-005-SSB","price":631.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hel-oil-cooler-kit-honda-civic-type-r-fk2-15-17-coolers-349.webp?v=1784502831"},{"product_id":"airtec-motorsport-oil-cooler-kit-honda-civic-type-r-fk2-15-17","title":"Airtec Motorsport Oil Cooler Kit Honda Civic Type R FK2 15-17","description":"\u003cp\u003eFollowing an extensive development process, AIRTEC Motorsport are proud to launch our oil cooler kit aimed at FK2 Civic Type R owners who require the ultimate cooling package to maintain steady running temperatures on track or fast road use.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eThe Challenge\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eWhen modifying the FK2 Civic Type R to increase power and torque, an unavoidable by-product is the additional heat level that’s transferred to the car’s cooling system. During sustained hard use, this can become a substantial issue, as temperatures can increase enough to trigger the ECU’s safety features, reducing torque or even putting the car into a limp mode. \u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eThe Solution\u003c\/strong\u003e\u003cbr\u003eDeveloped in-house at AIRTEC HQ in the UK we designed an oil cooler to help address the cooling issues when pushed hard. This cooler fits neatly behind the fog light (requires removal) and utilises\u003cspan\u003e our bespoke CAD-modelled air duct \u003c\/span\u003eto force cold air through the core. To create a flow path and further improve cooling, air then exits via the inner arch liner (requires cutting). A pre-cut mesh shield is supplied for both the front and rear to protect the radiator from road debris damage.\u003c\/p\u003e \u003cp\u003eThis can fit with our intercooler and auxiliary radiator\/turbo cooler to create the ultimate cooling package. The comprehensive kit also features laser-cut and powder-coated brackets, high-quality braided lines with AN fittings as well as all fixtures and fittings, and detailed fitting instructions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTested on Track\u003c\/strong\u003e\u003cbr\u003e20th June 2025 – Cadwell Park Circuit\u003cbr\u003eTest car fitted with air filter and Stage 1 remap producing a dyno proven 375bhp\u003cbr\u003eData logged via OBD port using Torque Pro app data recording and downloaded to PC.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRun 1\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e– 10.00am – Ambient Temperature:\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e24°C\u003c\/strong\u003e – 15 minute session – Maximum Oil Temperature:\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e106°C \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eRun 2\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e– 10:45am – Ambient Temperature:\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e25°C\u003c\/strong\u003e – 20 minute session – Maximum Oil Temperature: \u003cstrong\u003e112°C  \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eRun 3\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e– 11:30am – Ambient Temperature:\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e27°C\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– 15 minute session – Maximum Oil Temperature:\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e112°C \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eRun 4\u003c\/strong\u003e – 12:00pm – Ambient Temperature:\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e28°C\u003c\/strong\u003e – 20 minute session – Maximum Oil Temperature:\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e114°C\u003c\/strong\u003e  \u003cbr\u003e\u003cstrong\u003eRun 5\u003c\/strong\u003e – 2.00pm – Ambient Temperature:\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e29°C\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– 15 minute session – Maximum Oil Temperature:\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e118°C \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eRun 6\u003c\/strong\u003e – 2:45pm – Ambient Temperature:\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e30°C \u003c\/strong\u003e– 20 minute session – Maximum Oil Temperature: \u003cstrong\u003e117°C\u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eRun 7 –\u003c\/strong\u003e 3:30pm – Ambient Temperature:\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e28°C\u003c\/strong\u003e – 15 minute session – Maximum Oil Temperature: \u003cstrong\u003e113°C \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cimg decoding=\"async\" src=\"http:\/\/www.airtecmotorsport.com\/wp-content\/uploads\/sites\/4\/2025\/09\/Honda-Civic-FK2-Oil-Temperature.png\" width=\"567\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDriver Comments: \u003c\/strong\u003e\u003cbr\u003e“This was an extremely hot day and car coped very well. Before the auxiliary radiator and oil cooler were installed I would normally get approximately 5 to 6 laps, which is about 8 to 10 minutes of hard use before the oil temperature rose to around the 126 to 128°C. With the coolers installed, I can run at least 10 to 14 laps, which is over 20 minutes of hard use, and oil temperatures don’t normally go above 115°C.\u003c\/p\u003e \u003cp\u003eAlso a major advantage is that I can repeat that all day long, whereas before I found that once the temperature of the oil got really hot it would normally not cool down enough for the rest of the day,  so it meant I ended up doing only 3 to 4 laps before the temperature rose again, as the oil never fully cooled down and seemed to heat back up quicker.”\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned and developed specifically for the FK2 Civic Type R\u003c\/li\u003e \u003cli\u003eImproves oil cooling ability – tested on track and proven to work\u003c\/li\u003e \u003cli\u003eUtilises\u003cspan\u003e our bespoke CAD-modelled air duct\u003c\/span\u003e \u003c\/li\u003e \u003cli\u003eDucting channels air in and allows it to exit via arch liner\u003c\/li\u003e \u003cli\u003eBespoke laser-cut and powder coated brackets\u003c\/li\u003e \u003cli\u003eHigh-quality braided lines with AN fittings\u003c\/li\u003e \u003cli\u003eFits with our intercooler and auxiliary radiator\/turbo cooler kit to create the ultimate cooling package\u003c\/li\u003e \u003cli\u003eComprehensive kit with all fixtures, fittings and instructions\u003c\/li\u003e \u003c\/ul\u003e","brand":"AIRTEC Motorsport","offers":[{"title":"Default Title","offer_id":62764649218378,"sku":"ATMSHON7","price":489.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/ATMSHON7-1.jpg?v=1784502882"},{"product_id":"hel-performance-oil-cooler-kit-honda-civic-type-r-fk8-17-21","title":"Hel Performance Oil Cooler Kit Honda Civic Type R FK8 17-21","description":"\u003cp\u003eIntroducing our new direct fit oil cooler for the Honda FK8 Civic Type R. The HEL (Automotive) Devlopment Centre has been working on this kit for some time now, and we are happy to announce its release.\u003c\/p\u003e \u003cp\u003eUnlike the FK2 Civic Type R, there was not a great deal of room to fit an oil cooler in direct air flow, without either blocking the intercooler or trying to squeeze a cooler behind the front grill – which would limit the useful area of the cooler to around 5 rows, the rest hidden behind the bumper.\u003c\/p\u003e \u003cp\u003eAfter considering various locations we decided to develop a full “Race Inspired” oil cooler and brake duct to split the air flow for both brake and oil cooling.\u003c\/p\u003e \u003cp\u003eThe oil cooler ducting is laser cut from sheet aluminium before being bent to exact tolerance to fit the front left of the car. The ducting is hard anodised black to give long term protection.\u003c\/p\u003e \u003cp\u003eA 16 Row Setrab Series 6 ProLine oil cooler oil cooler is used in this kit. The 16 row option gives a great balance between minimising pressure loss while giving very effective cooling.\u003c\/p\u003e \u003cp\u003eAt the other end our cooler we opted for our latest Multi Angled Billet Thermostatic sandwich plate. The front mounted thermostat gives extra clearance on this kit where space around the oil filter is limited.\u003c\/p\u003e \u003cp\u003eHEL Performance Multi Angled Billet thermostatic sandwich plate set at 92°C (197.6°F). We've found the 92°C option gives you the perfect balance between cooling when needed and letting the engine warm up safely. It's also dangerous for the oil to be too cold and the thermostat controls the temperature with precision.\u003c\/p\u003e \u003cp\u003eThis comprehensive kit come complete with preassembled high flow AN10 HEL braided hoses and anodised aluminium fittings. The entire length of the hoses is protected with our HEL Performance high temp 1000°C heat sleeve.\u003c\/p\u003e \u003cp\u003eThis direct-fit kit offers a safe and reliable cooling system for the FK8 Type R. It comes complete with easy-to-understand instructions and our technical support team are always happy to answer any questions you may have.\u003c\/p\u003e \u003ch6\u003eWhat's Included\u003c\/h6\u003e \u003cul\u003e \u003cli\u003eSetrab Series 6 ProLine 16 row oil cooler with AN10 banjo adapters to maximise clearance and minimise pressure loss.\u003c\/li\u003e \u003cli\u003eHEL custom aluminium oil cooler\/brake ducting – preassembled with cooler.\u003c\/li\u003e \u003cli\u003eHEL multi angled solid billet 92°C thermostatic oil filter sandwich plate.\u003c\/li\u003e \u003cli\u003ePreassembled AN10 HEL braided hoses with anodised aluminium fittings protected in our high temp heat sleeve.\u003c\/li\u003e \u003cli\u003eHEL aluminium hose separator.\u003c\/li\u003e \u003cli\u003eStainless steel mounting hardware.\u003c\/li\u003e \u003cli\u003eInstallation instructions.\u003c\/li\u003e \u003c\/ul\u003e","brand":"HEL","offers":[{"title":"Default Title","offer_id":62764656361802,"sku":"HEL-HOCK-HON-008","price":826.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hel-performance-oil-cooler-kit-honda-civic-type-r-fk8-17-21-coolers-725.webp?v=1784502964"},{"product_id":"genuine-honda-oil-cooler-civic-type-r-fk8-fl5-17","title":"Genuine Honda Oil Cooler Civic Type R FK8 FL5 17+","description":"\u003cp\u003eKeep your car running and performing as it should with this Genuine Honda oil cooler designed specifically for the K20C featuring in the Civic FK8 and FL5. Part number: 15500-RPY-G01\u003c\/p\u003e","brand":"Genuine Honda","offers":[{"title":"Default Title","offer_id":62764668879178,"sku":"15500-RPY-G01","price":160.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/genuine-honda-oil-cooler-civic-type-r-fk8-fl5-17-coolers-230.webp?v=1784503159"},{"product_id":"airtec-motorsport-oil-cooler-kit-honda-civic-type-r-fk8-17-21","title":"Airtec Motorsport Oil Cooler Kit Honda Civic Type R FK8 17-21","description":"\u003cp\u003eAIRTEC Motorsport Oil Cooler Kit for Honda Civic FK8 Type R\u003c\/p\u003e \u003cp\u003eAs part of our expanding Honda Civic FK8 Type R product range, AIRTEC Motorsport is proud to launch our oil cooler kit suitable for track or fast road use.\u003c\/p\u003e \u003cp\u003eOur kit has been designed in the UK after thorough research and huge experience in developing uprated oil cooler packages for a variety of modified track and road cars.\u003c\/p\u003e \u003cp\u003eWith limited space, the challenge with this kit was to integrate a large capacity, external oil cooler neatly behind the bumper where it could still benefit from direct air flow, whilst integrating seamlessly with the car’s existing fixtures and fittings with no drilling or cutting required.\u003c\/p\u003e \u003cp\u003eAs a result, we have developed a kit that is completely reversible if need be. The comprehensive package includes a tried and tested 13-row AIRTEC oil cooler, bespoke laser-cut and powder-coated AIRTEC bracket, high quality braided hose lines with Aerotec fittings, and all fixtures, including instructions, for a simple bolt-on installation.\u003c\/p\u003e \u003cp\u003eTo ensure the maximum amount of air flow, we recommend removing the near side fog light and\/or installing the exit vent that comes in the kit into the wheel arch liner to provide improved flow. However, these are not essential and the oil cooler will still work fine using the bumper’s original intake slots.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTESTED ON TRACK\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eFollowing an extensive development process our oil cooler has been tried, tested and logged on the road and race track. Our comprehensive testing highlighted the oil cooler’s ability to cater with long periods of hard use, as seen by the oil temperature’s consistently low results in comparison to standard.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"http:\/\/www.airtecmotorsport.com\/wp-content\/uploads\/sites\/4\/2021\/10\/AIRTEC-VS-STOCK.jpg\" sizes=\"(max-width: 836px) 100vw, 836px\" srcset=\"https:\/\/www.airtecmotorsport.com\/wp-content\/uploads\/sites\/4\/2021\/10\/AIRTEC-VS-STOCK.jpg 836w, https:\/\/www.airtecmotorsport.com\/wp-content\/uploads\/sites\/4\/2021\/10\/AIRTEC-VS-STOCK-300x139.jpg 300w, https:\/\/www.airtecmotorsport.com\/wp-content\/uploads\/sites\/4\/2021\/10\/AIRTEC-VS-STOCK-768x356.jpg 768w, https:\/\/www.airtecmotorsport.com\/wp-content\/uploads\/sites\/4\/2021\/10\/AIRTEC-VS-STOCK-600x278.jpg 600w, https:\/\/www.airtecmotorsport.com\/wp-content\/uploads\/sites\/4\/2021\/10\/AIRTEC-VS-STOCK-129x60.jpg 129w, https:\/\/www.airtecmotorsport.com\/wp-content\/uploads\/sites\/4\/2021\/10\/AIRTEC-VS-STOCK-194x90.jpg 194w\" alt=\"\" width=\"836\" height=\"388\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"http:\/\/www.airtecmotorsport.com\/wp-content\/uploads\/sites\/4\/2021\/10\/AIRTEC-MULTI-RUN.jpg\" sizes=\"(max-width: 836px) 100vw, 836px\" srcset=\"https:\/\/www.airtecmotorsport.com\/wp-content\/uploads\/sites\/4\/2021\/10\/AIRTEC-MULTI-RUN.jpg 1015w, https:\/\/www.airtecmotorsport.com\/wp-content\/uploads\/sites\/4\/2021\/10\/AIRTEC-MULTI-RUN-300x114.jpg 300w, https:\/\/www.airtecmotorsport.com\/wp-content\/uploads\/sites\/4\/2021\/10\/AIRTEC-MULTI-RUN-768x292.jpg 768w, https:\/\/www.airtecmotorsport.com\/wp-content\/uploads\/sites\/4\/2021\/10\/AIRTEC-MULTI-RUN-600x228.jpg 600w, https:\/\/www.airtecmotorsport.com\/wp-content\/uploads\/sites\/4\/2021\/10\/AIRTEC-MULTI-RUN-158x60.jpg 158w, https:\/\/www.airtecmotorsport.com\/wp-content\/uploads\/sites\/4\/2021\/10\/AIRTEC-MULTI-RUN-237x90.jpg 237w\" alt=\"\" width=\"836\" height=\"318\"\u003e\u003c\/p\u003e \u003cp\u003eIts increased cooling efficiency and easy fitment makes it an essential modification for all modified FK8 Type R models.\u003c\/p\u003e \u003cp\u003eKey features:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned and developed in the UK\u003c\/li\u003e \u003cli\u003eReduces temperatures on track and road\u003c\/li\u003e \u003cli\u003eProven AIRTEC large capacity oil cooler\u003c\/li\u003e \u003cli\u003eBespoke laser-cut and powder-coated brackets\u003c\/li\u003e \u003cli\u003eHigh-quality hoses and fittings\u003c\/li\u003e \u003cli\u003eComprehensive kit with all fixtures, fittings and instructions\u003c\/li\u003e \u003c\/ul\u003e","brand":"AIRTEC Motorsport","offers":[{"title":"Plain - No Logo","offer_id":62764670091594,"sku":"ATMSFK802-PLAIN","price":428.26,"currency_code":"GBP","in_stock":true},{"title":"Blue Airtec Logo","offer_id":62764670124362,"sku":"ATMSFK802-BLUE","price":428.26,"currency_code":"GBP","in_stock":true},{"title":"Red Airtec Logo","offer_id":62764670157130,"sku":"ATMSFK802-RED","price":428.26,"currency_code":"GBP","in_stock":true},{"title":"White Airtec Logo","offer_id":62764670189898,"sku":"ATMSFK802-WHITE","price":428.26,"currency_code":"GBP","in_stock":true},{"title":"Yellow Airtec Logo","offer_id":62764670222666,"sku":"ATMSFK802-YELLOW","price":428.26,"currency_code":"GBP","in_stock":true},{"title":"Orange Airtec Logo","offer_id":62764670255434,"sku":"ATMSFK802-ORANGE","price":428.26,"currency_code":"GBP","in_stock":true},{"title":"Green Airtec Logo","offer_id":62764670288202,"sku":"ATMSFK802-GREEN","price":428.26,"currency_code":"GBP","in_stock":true},{"title":"Grey Airtec Logo","offer_id":62764670320970,"sku":"ATMSFK802-GREY","price":428.26,"currency_code":"GBP","in_stock":true},{"title":"Pink Airtec Logo","offer_id":62764670353738,"sku":"ATMSFK802-PINK","price":428.26,"currency_code":"GBP","in_stock":true},{"title":"Purple Airtec Logo","offer_id":62764670386506,"sku":"ATMSFK802-PURPLE","price":428.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/airtec-motorsport-oil-cooler-kit-honda-civic-type-r-fk8-17-21-coolers-982.webp?v=1784503177"},{"product_id":"hks-oil-cooler-kit-honda-civic-type-r-fk8-17-21","title":"HKS Oil Cooler Kit Honda Civic Type R FK8 17-21","description":"\u003cp\u003eHKS Oil Cooler Kit.  The K20C engine generates 320ps with 2.0 displacement; therefore, the vehicle is equipped with a water-cooled oil cooler to stabilize the extreme high engine output. However, under circuit driving, the temperature  of both oil and water rise sharply because adequate heat radiation cannot be obtained, and fail safe mode becomes activated.  Adding HKS air cooling type oil cooler kit provides high heat exchange efficiency to suppress the temperature rise not only of the oil but also the water. HKS oil cooler kit includes a special aluminum air guide.  Newly developed 48mm wide 9-layer oil cooler core and special air duct to extract the maximum performance are utilised and mounted to the inside of the inner fender.  The oil pump’s pulsation noise generated by increase of engine rotation sometimes transmits to the vehicle interior through the high pressure-resistant stainless mesh hose.   HKS oil cooler kit has the insulator to substantially  reduce this pulsation noise.  The attachment has a thermostat to restrain excessive cooling of the part. Vehicle modification required to install this kit is minimised. (Modification of back of the bumper, inner fender, and brake duct are only required.)\u003c\/p\u003e","brand":"HKS","offers":[{"title":"Default Title","offer_id":62764672581962,"sku":"15004-AH004","price":864.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hks-oil-cooler-kit-honda-civic-type-r-fk8-17-21-coolers-750.webp?v=1784503198"},{"product_id":"greddy-hi-capacity-oil-cooler-kit-honda-civic-type-r-fk8-17-19","title":"GReddy Hi-Capacity Oil Cooler Kit Honda Civic Type R FK8 17-19","description":"\u003cp\u003e12058003 - 2017-2019 FK8 Civic Type R - FK9 Engine Oil Cooler Kit (center grill, over intercooler)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e*Not compatible with 2020 model Type R\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eNS1010G - 10row GReddy Oil Cooler with -10 XRP lines. Mounts above intercooler behind center grill. M20xP1.5 GREX Oil Block Adapter with built in thermostat and ducting plate, brackets, hardware. K-type L core (+TBAcc or +0.TBA quarts)\u003c\/p\u003e \u003cp\u003e*Recommend to use GReddy Oil Filter OX-05 M20-P1.5, Dia. 65mm, H75mm p\/n 13901105 or equivalent.\u003c\/p\u003e \u003cp\u003eThe GReddy Performance Products Civic Type R Oil Cooler Kit addresses the documented cooling demands of the high performance K20C1 engine. By mounting a high capacity K-type Koyo core, just above the intercooler, in an unused area just behind the front grill, it does not hamper air-flow. For constant oil temperatures, the other key component in the kit, is the “tried and true” GREX oil block adapter with integrated thermostat for quick engine oil warm ups. The oil block and 10row oil cooler is connected by high flow -10 AN fittings high-performance braided lines. The complete kit also includes bolt-on brackets, necessary hardware.\u003c\/p\u003e","brand":"GReddy","offers":[{"title":"Default Title","offer_id":62764697878858,"sku":"12058003","price":885.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/greddy-hi-capacity-oil-cooler-kit-honda-civic-type-r-fk8-17-19-coolers-533.webp?v=1784503365"},{"product_id":"greddy-oil-cooler-honda-civic-type-r-fk8-17-21","title":"GReddy Oil Cooler Honda Civic Type R FK8 17-21","description":"GREDDY Oil Cooler Kit. The GReddy Performance Products Civic Type R Oil Cooler Kit addresses the documented cooling demands of the high performance K20C1 engine. By mounting an efficient GReddy inner-fin oil cooler core, in an unused area of the front left bumper, it does not harm air-flow to the intercooler or radiator. For constant oil temperatures, the other key component in the kit, is the _tried and true_ GREX oil block adapter with integrated thermostat for quick engine oil warm ups. The oil block and 10row oil cooler is connected by high flow -10 AN fittings and lightweight XRP performance lines. The complete kit also includes bolt-on brackets, necessary hardware and a circuit-spec air-duct, to maximize the cooling effects. Mounts behind left side of the front bumper \u003cbr\u003e \u003cbr\u003e INCLUDES: \u003cbr\u003e - M20xP1.5 GREX Oil Block Adapter with built in thermostat.\u003cbr\u003e - Ducting plate, brackets, hardware.","brand":"GReddy","offers":[{"title":"Default Title","offer_id":62764697911626,"sku":"TP-12058002","price":725.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/greddy-oil-cooler-honda-civic-type-r-fk8-17-21-coolers-931.webp?v=1784503366"},{"product_id":"mishimoto-direct-fit-oil-cooler-kit-honda-civic-type-r-fk8-17-21","title":"Mishimoto Direct-Fit Oil Cooler Kit Honda Civic Type-R FK8 17-21","description":"\u003cp\u003eNothing puts a damper on a day at the track with your 2017-2021 Honda Civic Type R quite like cutting your track time short due to overheating. It's no secret now that the FK8 struggles to keep the temperatures of its fluids at the correct level. We here at Mishimoto decided to take some of the heat off the K20C1 with the Honda Civic Type R Direct-Fit Oil Cooler Kit. Honda fitted this engine with a liquid-to-liquid stacked plate oil cooler from the factory. During normal driving on a factory tune, this can retain proper oil temperatures. However, once the CTR is put into the environment it was intended for, or with the addition of an aggressive tune, this stock unit can't keep up. The Mishimoto Direct-Fit Oil Cooler Kit gives the stock system a hand by adding a 19-row air-to-air cooler into the system, which utilizes the FK8?s sculpted and aero-centric front bumper to drop oil temperatures by 15?F. This cooler is held in place by a pair of application-specific brackets, designed to keep proper airflow through the front wheel well. Your Civic's oil is securely transported to and from the cooler by way of sturdy stainless steel braided lines featuring durable -AN fittings. The 2017-2021 Honda Civic Type R Oil Cooler Kit is available as a thermostatic kit to eliminate the potential of overcooling, and with the option of a silver or black cooler. As with all of our products, this kit also includes the Mishimoto Lifetime Warranty for a worry-free installation.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Black","offer_id":62764703514954,"sku":"MMOC-CTR-17TBK","price":669.6,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":62764703547722,"sku":"MMOC-CTR-17TSL","price":669.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/mishimoto-direct-fit-oil-cooler-kit-honda-civic-type-r-fk8-17-21-coolers-446.webp?v=1784503467"},{"product_id":"airtec-motorsport-oil-cooler-honda-civic-type-r-fl5-23","title":"Airtec Motorsport Oil Cooler Honda Civic Type-R FL5 23+","description":"\u003cp\u003eAs part of our expanding Honda platform product range, AIRTEC Motorsport is proud to launch our external oil cooler kit for the FL5 Civic Type R, suitable for track or fast road use.\u003c\/p\u003e \u003cp\u003eWith huge experience in developing external oil cooler packages for a variety of modified track and road cars, and aware of the FL5 Type R’s oil cooling issues during track use, the challenge with this kit was to neatly integrate a large capacity, external oil cooler where it could still benefit from direct air flow, whilst integrating seamlessly with the car’s existing fixtures and fittings with no drilling or cutting required.\u003c\/p\u003e \u003cp\u003eUnlike previous Type R models, mounting the oil cooler in the lower bumper wasn’t possible, so we chose to utilise the upper grille area and opted to design a unique oil cooler in order to make the very most of the limited space available, rather than use a generic off-the-shelf item. \u003c\/p\u003e \u003cp\u003eAs a result, in comparison to a universal 13-row oil cooler, our bespoke oil cooler has 45% more capacity and is 100%\/twice as much frontal area, which means there is more air flow passing through the core to help cool it. We also purposely spaced the oil cooler away from the radiator to avoid any potential heat soak issues, creating a package that is unrivalled in the market.\u003c\/p\u003e \u003cp\u003eThe comprehensive package includes bespoke laser-cut and powder-coated mounting brackets, high-quality braided hose lines with Aerotec fittings, and all fixtures, including instructions, for a simple bolt-on installation.\u003c\/p\u003e \u003cp\u003eIts increased cooling efficiency and easy fitment makes it an essential modification for all modified FL5 Type R models.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDimensions: \u003c\/strong\u003e\u003cbr\u003eHeight: 138mm\u003cbr\u003eWidth: 350mm\u003cbr\u003eDepth: 40mm\u003cbr\u003eCapacity: 1.93 litres\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eBespoke oil cooler design developed for the FL5 platform\u003c\/li\u003e \u003cli\u003e45% more volume than a universal cooler\u003c\/li\u003e \u003cli\u003e100% more frontal area than a universal cooler\u003c\/li\u003e \u003cli\u003eReduces temperatures on track and road\u003c\/li\u003e \u003cli\u003eBespoke laser-cut and powder-coated brackets\u003c\/li\u003e \u003cli\u003eHigh-quality hoses and fittings\u003c\/li\u003e \u003cli\u003eNo cutting or drilling required\u003c\/li\u003e \u003cli\u003eComprehensive kit with all fixtures, fittings and instructions\u003c\/li\u003e \u003c\/ul\u003e","brand":"AIRTEC Motorsport","offers":[{"title":"Plain - No Logo","offer_id":62764709577034,"sku":"ATMSHON04-PLAIN","price":550.15,"currency_code":"GBP","in_stock":true},{"title":"Blue","offer_id":62764709609802,"sku":"ATMSHON04-BLUE","price":550.15,"currency_code":"GBP","in_stock":true},{"title":"White","offer_id":62764709642570,"sku":"ATMSHON04-WHITE","price":550.15,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":62764709675338,"sku":"ATMSHON04-YELLOW","price":550.15,"currency_code":"GBP","in_stock":true},{"title":"Orange","offer_id":62764709708106,"sku":"ATMSHON04-ORANGE","price":550.15,"currency_code":"GBP","in_stock":true},{"title":"Green","offer_id":62764709740874,"sku":"ATMSHON04-GREEN","price":550.15,"currency_code":"GBP","in_stock":true},{"title":"Purple","offer_id":62764709773642,"sku":"ATMSHON04-PURPLE","price":550.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/airtec-motorsport-oil-cooler-honda-civic-type-r-fl5-23-coolers-754.webp?v=1784503534"},{"product_id":"hel-performance-thermostatic-oil-cooler-kit-honda-civic-type-r-fl5-23","title":"Hel Performance Thermostatic Oil Cooler Kit Honda Civic Type R FL5 23+","description":"\u003cp\u003eIntroducing our new direct fit oil cooler for the all-new 2023-onwards Honda FL5 Civic Type R. The HEL (Automotive) Development Centre has been working on this kit since we purchased our own FL5 to work on. We’ve spent a lot of time developing this one and are happy with the outcome.\u003c\/p\u003e \u003cp\u003eUnlike the FK2 Civic Type R and much like the FK8, there were not a great deal of options for where an oil cooler could go on the FL5. After 3D scanning the front end we decided on the left side of the grille area which is in direct airflow and doesn’t hinder airflow to anything else.\u003c\/p\u003e \u003cp\u003eA 16 Row Setrab Series 6 ProLine oil cooler oil cooler is used in this kit. The 16 row option gives a great balance between minimising pressure loss while giving very effective cooling.\u003c\/p\u003e \u003cp\u003eAt the other end our cooler we opted for our latest Multi Angled Billet Thermostatic sandwich plate. The front mounted thermostat gives extra clearance on this kit where space around the oil filter is limited. Using this plate also has 2 spare ports which allow you to fit temperature and pressure sensors if required.\u003c\/p\u003e \u003cp\u003eHEL Performance Multi Angled Billet thermostatic sandwich plate set at 92°C (197.6°F). We've found the 92°C option gives you the perfect balance between cooling when needed and letting the engine warm up safely. It's also dangerous for the oil to be too cold and the thermostat controls the temperature with precision.\u003c\/p\u003e \u003cp\u003eThis comprehensive kit come complete with preassembled high flow AN10 HEL braided hoses and anodised aluminium fittings and all fixings\/brackets which use OE pickups and requires no drilling\/modifications on the car at all. The hoses are protected with abrasion-resistant heat shrunk braided sleeving which aids also with noise and rattle suppression.\u003c\/p\u003e \u003cp\u003eThis direct-fit kit offers a safe and reliable cooling system for the FL5 Type R. It comes complete with easy-to-understand instructions and our technical support team are always happy to answer any questions you may have.\u003c\/p\u003e \u003cp\u003eWhat's Included\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSetrab Series 6 ProLine 16 row oil cooler with AN10 banjo adapters to maximise clearance and minimise pressure loss.\u003c\/li\u003e \u003cli\u003eHEL custom aluminium oil cooler brackets.\u003c\/li\u003e \u003cli\u003eHEL multi angled solid billet 92°C thermostatic oil filter sandwich plate.\u003c\/li\u003e \u003cli\u003ePreassembled AN10 HEL braided hoses with anodised aluminium fittings.\u003c\/li\u003e \u003cli\u003eStainless steel mounting hardware.\u003c\/li\u003e \u003cli\u003eInstallation instructions.\u003c\/li\u003e \u003c\/ul\u003e","brand":"HEL","offers":[{"title":"Default Title","offer_id":62764710854986,"sku":"HEL-HOCK-HON-FL5","price":631.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hel-performance-thermostatic-oil-cooler-kit-honda-civic-type-r-fl5-23-coolers-294.webp?v=1784503555"},{"product_id":"airtec-motorsport-gearbox-oil-cooler-honda-civic-type-r-fl5-23","title":"Airtec Motorsport Gearbox Oil Cooler Honda Civic Type R FL5 23+","description":"\u003cp\u003eAs part of our expanding Honda product range, AIRTEC Motorsport are proud to launch our uprated gearbox oil cooler suitable for track or fast road use.\u003c\/p\u003e \u003cp\u003eTo date, there is no other company offering a gearbox oil cooler on the market, but our kit hasn’t just been designed to help cool the transmission, it also helps remove heat from the engine’s cooling system, which helps reduce crucial operating temperatures.\u003c\/p\u003e \u003cp\u003eThis is because from the factory, there is a simple heat exchanger\/oil Modine located by the gearbox that uses the engine’s coolant to help cool the gearbox oil.\u003c\/p\u003e \u003cp\u003eBut by adding an external oil cooler into this existing loop, both gearbox and engine running temperature are effectively reduced. The substantial increase in gearbox oil volume thanks to the cooler and lines also help keep temperatures lower for longer.\u003c\/p\u003e \u003cp\u003eThe oil cooler itself mounts neatly to a supplied replacement lower brace bar behind the rad pack that is stronger and more rigid than the original Honda brace it replaces.\u003c\/p\u003e \u003cp\u003eThe comprehensive package also features an air duct panel to direct fresh air to the oil cooler. Made from lightweight aluminium that is laser cut for a perfect fitment, the panel features more ventilation slots for additional passive cooling under the engine and uses all the original fixings for a direct replacement.\u003c\/p\u003e \u003cp\u003eFinished in a high-quality black powder coat, the kit requires no trimming or cutting and can be reverted back to standard. The fitting kit includes oil lines and fittings, as all fixtures required to fit, including a detailed installation guide.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eUnique kit designed specifically for the Honda Civic FL5\u003c\/li\u003e \u003cli\u003eReduces transmission\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAND\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eengine running temperatures\u003c\/li\u003e \u003cli\u003eDirect replacement kit that requires no cutting or trimming\u003c\/li\u003e \u003cli\u003eFeatures air scoop panel to feed fresh air to the oil cooler\u003c\/li\u003e \u003cli\u003eFinished in high-quality black powder coat\u003c\/li\u003e \u003cli\u003eIncludes all fittings and fixtures\u003c\/li\u003e \u003cli\u003eFeatures detailed fitting guide\u003c\/li\u003e \u003c\/ul\u003e","brand":"AIRTEC Motorsport","offers":[{"title":"Default Title","offer_id":62764710920522,"sku":"ATMSHON6","price":449.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/airtec-motorsport-gearbox-oil-cooler-honda-civic-type-r-fl5-23-coolers-840.webp?v=1784503557"},{"product_id":"csf-dual-engine-oil-cooler-kit-honda-civic-fl5-type-r-23","title":"CSF Dual Engine Oil Cooler Kit Honda Civic FL5 Type R 23+","description":"\u003cul class=\"wp-block-list\"\u003e \u003cli\u003eTwo\u003cspan\u003e \u003c\/span\u003eCSF #8119\u003cspan\u003e \u003c\/span\u003eHigh-Performance Dual Pass Oil Coolers \u003cul class=\"wp-block-list\"\u003e \u003cli\u003eBar\/Plate Core offers strength and durability\u003c\/li\u003e \u003cli\u003e100% TIG Welded Construction tested to 120 PSI\u003c\/li\u003e \u003cli\u003eSmooth 40-degree feed\/return fitting design\u003c\/li\u003e \u003cli\u003eDual Pass flow for additional cooling\u003c\/li\u003e \u003cli\u003eOil Capacity increased by over 2 Quarts (2 Liters)\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003eMotorsports grade AN lines with patented quick release fittings by\u003cspan\u003e \u003c\/span\u003eDYME PSI \u003cul class=\"wp-block-list\"\u003e \u003cli\u003e304 Stainless Steel reinforcing braid and Polyethylene top braid\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003eCNC Billet Machined Sandwich Plate with 175-195°F (80-90°C) Thermostat and 1\/8 NPT port aftermarket oil temp sensor\u003c\/li\u003e \u003cli\u003ePre-Preg Carbon Fiber Bumper Vents for maximum airflow and cooling effect\u003c\/li\u003e \u003cli\u003eLaser Cut Louvered fender liner vents to improve the air flow path and promote heat extraction\u003c\/li\u003e \u003cli\u003eReplacement Washer Fluid Bottle compatible with factory washer motor\u003c\/li\u003e \u003cli\u003eIncludes all Brackets and Hardware\u003c\/li\u003e \u003cli\u003eIncludes installation instructions and templates\u003c\/li\u003e \u003cli\u003e2-Year Limited Warranty\u003c\/li\u003e \u003c\/ul\u003e \u003cul class=\"wp-block-list\"\u003e \u003cli\u003e \u003cstrong\u003eApplications:\u003c\/strong\u003e \u003cul class=\"wp-block-list\"\u003e \u003cli\u003e2023+ FL5 Honda Civic Type R\u003c\/li\u003e \u003cli\u003e2023+ DE5 Integra Type S (Will require different venting system, more info to come)\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cimg src=\"https:\/\/shop.regalautosport.com\/cdn\/shop\/files\/CSF-8343_data-log_1_result.webp?v=1768833476\u0026amp;width=4096\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cimg src=\"https:\/\/shop.regalautosport.com\/cdn\/shop\/files\/CSF-8343_data-log_2_result.webp?v=1768833475\u0026amp;width=4096\"\u003e\u003c\/p\u003e","brand":"CSF","offers":[{"title":"Default Title","offer_id":62764715704650,"sku":"CSF-8343","price":2028.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/CSF-8343-1.jpg?v=1784503611"},{"product_id":"genuine-honda-oil-cooler-inlet-hose-nsx-na1","title":"Genuine Honda Oil Cooler Inlet Hose NSX NA1","description":"\u003cp\u003eHONDA Oil Cooler Inlet Hose. Maintain your car as Honda intended. As with all genuine Honda parts expect a perfect fit and performance every time. Part number: 19422-PR7-A01\u003c\/p\u003e","brand":"Genuine Honda","offers":[{"title":"Default Title","offer_id":62764939477322,"sku":"19422-PR7-A01","price":5.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/genuine-honda-oil-cooler-inlet-hose-nsx-na1-coolers-712.webp?v=1784508029"},{"product_id":"genuine-honda-oil-cooler-joint-s2000-f20c-ap1-99-04","title":"Genuine Honda Oil Cooler Joint S2000 F20C AP1 99-04","description":"\u003cp\u003eHONDA Oil Cooler Joint. If you're installing an oil cooler on your K24 then you'll need this OEM Honda joint, which is a stock component on the F20C engine. Maintain your car just as Honda intended. As with all genuine Honda parts expect perfect fit and performance every time. Part number: 11107-PT2-000\u003c\/p\u003e","brand":"Genuine Honda","offers":[{"title":"Default Title","offer_id":62764990300490,"sku":"11107-PT2-000","price":9.12,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/genuine-honda-oil-cooler-joint-s2000-f20c-ap1-99-04-coolers-893.webp?v=1784508495"},{"product_id":"mishimoto-oil-cooler-kit-honda-s2000-ap1-ap2-00-09","title":"Mishimoto Oil Cooler Kit Honda S2000 AP1 AP2 00-09","description":"\u003cp\u003eWhether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system.Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000.This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability.It includes preassembled stainless steel lines and S2000-specific mounting brackets for a painless and clean installation.The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop.This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler.As with all our products, this kit includes the Mishimoto lifetime warranty.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Non-Thermostatic \/ Silver Cooler","offer_id":62765034635594,"sku":"MMOC-S2K-00","price":513.6,"currency_code":"GBP","in_stock":true},{"title":"Non-Thermostatic \/ Black Cooler","offer_id":62765034668362,"sku":"MMOC-S2K-00BK","price":513.6,"currency_code":"GBP","in_stock":true},{"title":"Thermostatic \/ Silver Cooler","offer_id":62765034701130,"sku":"MMOC-S2K-00T","price":578.4,"currency_code":"GBP","in_stock":true},{"title":"Thermostatic \/ Black Cooler","offer_id":62765034733898,"sku":"MMOC-S2K-00TBK","price":578.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/mishimoto-oil-cooler-kit-honda-s2000-ap1-ap2-00-09-coolers-835.webp?v=1784509140"},{"product_id":"forge-motorsport-oil-cooler-kit-hyundai-i30n-20-present","title":"Forge Motorsport Oil Cooler Kit Hyundai i30N 20-Present","description":"\u003cp\u003eDeveloped from our direct involvement within the BTCC and Mini Challenge race series where we have provided race proven and \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/What_do_Forge_Motorsport_do_in_the_BTCC--post--58.html\" target=\"_blank\"\u003echampionship winning cooling packages\u003c\/a\u003e, we have directly transferred our knowledge from this over to our road going products. FMOC11 has been developed with the same engineering expertise that is applied to our Mini Challenge Oil coolers, these see extensive driving over the race season calendar, so we are proud to give the I30N the same motorsport treatment. Lowering your oil temps on and off the track whilst providing a product that does not skimp on quality, so much so that it is backed by our Forge Lifetime Guarantee*\u003c\/p\u003e  \u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Products\/FMOC11\/FMOC11-RawFitted_1_WEB.jpg\"\u003e\u003c\/p\u003e  \u003cp\u003eWith our extensive range of performance parts out on the market allowing the limits of the i30N\/Veloster N to be pushed in the chase for top power gains, the addition of power and speed creates heat. Rising oil temperatures will result in only one outcome, a reduction of sufficient lubrication of your engines internal components. Therefore, the FMOC11 is a must have product for the keen driver, the location of the oil cooler radiator at the front of the vehicle’s radiator grill allows for superior air flow. During our development of this product we have seen oil temperatures reduced significantly.\u003c\/p\u003e  \u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Products\/FMOC11\/OilCooler-Orientation-FMOC11.jpg\"\u003e\u003c\/p\u003e  \u003cp\u003eThe Hyundai oil cooler has its inlet and outlets placed in the correct position for optimum flow , when oil coolers are fitted upside-down this can lead to cavitation (air locks) within the system, this can over a prolonged period of time lead to engine fatigue and potentially internal component damage due to insufficient engine lubrication.\u003c\/p\u003e  \u003cdiv class=\"pure-g\"\u003e \u003cdiv class=\"pure-u-1 pure-u-md-1-2 side-padding-md\"\u003e \u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Products\/FMOC11\/OilCooler-Bracket-FMOC11.jpg\"\u003e\u003cbr\u003e Unlike many oil cooler kits, the FMOC11 keeps the factory oil to water cooler in position. This essentially doubles your engines oil cooling. We’ve also developed the kit to use a bespoke laser cut aluminium bracket which makes for perfect fitment to the i30N crash bar. Supplied with the kit are 2x pre-assembled, high quality double braided AN-8 oil lines.\u003c\/p\u003e \u003c\/div\u003e  \u003cdiv class=\"pure-u-1 pure-u-md-1-2 side-padding-md\"\u003e \u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Products\/FMOC11\/OilCooler-SandwhichPlate-FMOC11-NoLogo.jpg\"\u003e\u003cbr\u003e We’ve incorporated a thermostat that is built into the oil cooler sandwich plate, this has been set to open at 85C as this was observed to be the optimal working temperature of the oil cooler when testing, this means the engine is working at its most efficient oil temperature range however hard you push the vehicle.\u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThe kit comes with the following:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e1x Forge Aluminium sandwich plate\u003cbr\u003e 1x Twin pass oil cooler \u003cbr\u003e 4x M6x20 fasteners\u003cbr\u003e 4x M6 washers\u003cbr\u003e 2x Oil lines \u003cbr\u003e 4x M6 Rubber Riv nuts\u003cbr\u003e 1X M20x1.5 adaptor\u003cbr\u003e All the fixings required \u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Install%20Levels\/7.jpg\"\u003e\u003cbr\u003e \u003cscript async charset=\"utf-8\" src=\"\/\/cdn.thinglink.me\/jse\/embed.js\"\u003e\u003c\/script\u003e\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Alloy","offer_id":62765057343818,"sku":"FMOC11-ALL","price":585.13,"currency_code":"GBP","in_stock":true},{"title":"Black","offer_id":62765057376586,"sku":"FMOC11-BLA","price":585.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/forge-motorsport-oil-cooler-kit-hyundai-i30n-20-present-coolers-844.webp?v=1784509395"},{"product_id":"forge-motorsport-oil-cooler-hyundai-i30n-mk3-5-facelift-20-24","title":"Forge Motorsport Oil Cooler Hyundai i30N MK3.5 Facelift 20-24","description":"\u003cp\u003eDeveloped from our \u003cstrong\u003edirect involvement with BTCC\u003c\/strong\u003e and success with the previous generation I30N, Forge Motorsport is proud to release an oil cooler kit for the Hyundai i30N MK3.5. This oil cooler radiator is lifted straight from our motorsport department, so we know this component performs extremely well, as well as the cores tough and durable construction. Next stage was to design a kit incorporating this core which will fit the i30N Mk3.5 perfectly - the result is a bespoke oil cooler kit with \u003cstrong\u003etrue motorsport development\u003c\/strong\u003e behind it.\u003c\/p\u003e  \u003cdiv class=\"pure-g pure-g-gapped\"\u003e \u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e \u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30N_MK35_Facelift_Oil_Cooler_81279jpeg.jpg\"\u003e\u003c\/p\u003e \u003c\/div\u003e  \u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e \u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30N_MK35_Facelift_Oil_Cooler_96082jpeg.jpg\"\u003e\u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e  \u003cp\u003eDuring our time developing new products for the second generation i30N we found a significant floor with the vehicle especially when tuned. \u003cstrong\u003eOil temperatures can climb to dangerous levels when on track or when driven hard in hotter climates\u003c\/strong\u003e, The rising oil temperatures change the viscosity potentially thinning the oil, this will result in only one outcome, a reduction of sufficient lubrication of your engines internal components. Therefore, the FMOC13 is a must have product for the keen driver. The location of the oil cooler at the front of the vehicle’s radiator grill allows for superior air flow. During our development of this product, we have seen \u003cstrong\u003eoil temperatures reduced significantly.\u003c\/strong\u003e\u003c\/p\u003e  \u003cdiv class=\"pure-g pure-g-gapped\"\u003e \u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e \u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30N_MK35_Facelift_Oil_Cooler_14112jpeg.jpg\"\u003e\u003c\/p\u003e \u003c\/div\u003e  \u003cdiv class=\"pure-u-1 pure-u-md-1-2\"\u003e \u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30N_MK35_Facelift_Oil_Cooler_43693jpeg.jpg\"\u003e\u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e  \u003cp\u003eUnlike many oil cooler kits, the FMOC13 keeps the factory oil to water cooler in position. This essentially \u003cstrong\u003edoubles your engines oil cooling. \u003c\/strong\u003eThis new product is not to be confused with a universal oil cooler. FMOC13 has a laser cut aluminium bracket which makes for perfect fitment to the i30N crash bar and has an incorporated side ducting which guides air flow through the core.\u003c\/p\u003e  \u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Picture1.jpg\"\u003e\u003c\/p\u003e  \u003cp\u003eManufactured in Gloucester UK, FMOC13 is made to the uppermost standard and is backed up by the Forge Motorsport \u003cstrong\u003elifetime warranty\u003c\/strong\u003e. It is available in raw finish or black powder coat finish for the stealthier look.\u003c\/p\u003e  \u003cp\u003eWe’ve incorporated a thermostat that is built into the oil cooler sandwich plate, this has been set to open at 85°C as this was observed to be the optimal working temperature of the oil cooler when testing, this means the engine is working at its most efficient oil temperature range however hard you push the vehicle. The oil cooler lines are manufactured from PTFE and reinforced with stainless steel braided line nylon braid, and the fittings are aviation grade aluminium.\u003c\/p\u003e  \u003cp\u003e \u003c\/p\u003e  \u003cp align=\"center\"\u003e\u003cstrong\u003eThe kit comes with the following:\u003c\/strong\u003e\u003c\/p\u003e  \u003cp align=\"center\"\u003e\u003cstrong\u003e1x Forge aluminium sandwich plate\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003e\u003cstrong\u003e1x twin pass oil cooler \u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003e4x M6x20 fasteners\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003e4x M6 washers\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003e2x oil lines \u003c\/strong\u003e\u003cbr\u003e 4x M6 Rubber Riv nuts\u003cbr\u003e \u003cstrong\u003e1X M20x1.5 adaptor\u003c\/strong\u003e\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003e1X weather strip\u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003e\u003cstrong\u003eAll the fixings required \u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e  \u003cp align=\"center\"\u003e\u003cstrong\u003e\u003cstrong\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Install%20Levels\/6.jpg\"\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e  \u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/FORGE-WEB-DIVIDER.png\"\u003e\u003c\/p\u003e  \u003ch2 style=\"text-align: center;\"\u003e\u003cstrong\u003eComplimentary Products\u003c\/strong\u003e\u003c\/h2\u003e  \u003cp\u003eWith Hyundai redeveloping the turbo charger to run more boost and a larger flow than the previous generation there is even more reason to replace more restrictive OEM intercooler with the \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Intercooler_for_the_Hyundai_i30N_Mk35_Facelift--product--2105.html\" target=\"_blank\"\u003elarger Forge Motorsport item\u003c\/a\u003e, based on a stage 2 ECU calibration and fitted with the Forge intake (\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Induction_Kit_for_Hyundai_i30N_Kona_N_and_Veloster_N--product--1714.html\" target=\"_blank\"\u003eFMINDK28\u003c\/a\u003e) and turbo inlet adaptor (\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_i30N_MK35_Facelift_Kona_N_Turbo_Inlet_Adaptor--product--2069.html\" target=\"_blank\"\u003eFMTIA10\u003c\/a\u003e) the new intercooler performed as expected,\u003c\/p\u003e  \u003cdiv class=\"pure-g pure-g-gapped\"\u003e \u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e \u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Intercooler_for_the_Hyundai_i30N_Mk35_Facelift--product--2105.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Intercooler_for_the_Hyundai_i30N_Mk35_Facelift_82190jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e \u003c\/div\u003e  \u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e \u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Intercooler_for_the_Hyundai_i30N_Mk35_Facelift--product--2105.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Intercooler_for_the_Hyundai_i30N_Mk35_Facelift_85826jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e \u003c\/div\u003e  \u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e \u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Intercooler_for_the_Hyundai_i30N_Mk35_Facelift--product--2105.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Intercooler_for_the_Hyundai_i30N_Mk35_Facelift_51211jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e  \u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/FORGE-WEB-DIVIDER.png\"\u003e\u003c\/p\u003e  \u003cp\u003eThe \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_i30N_MK35_Facelift_Kona_N_Turbo_Inlet_Adaptor--product--2069.html\" target=\"_blank\"\u003eFMTIA10\u003c\/a\u003e is proven to benefit the engines performance. With one of the weak links on the i30N and intake system being the restrictive aluminium inlet pipe we found something more was needed on stage 1 and 2 tuned vehicles. You cannot go wrong with Forge Motorsport hardware on your tuned Hyundai, the results speak for themselves.\u003c\/p\u003e  \u003cdiv class=\"pure-g pure-g-gapped\"\u003e \u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e \u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_i30N_MK35_Facelift_Kona_N_Turbo_Inlet_Adaptor--product--2069.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30NVeloster_N_Turbo_Inlet_Adaptor_84878jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e \u003c\/div\u003e  \u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e \u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_i30N_MK35_Facelift_Kona_N_Turbo_Inlet_Adaptor--product--2069.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30NVeloster_N_Turbo_Inlet_adaptor_91653jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e \u003c\/div\u003e  \u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e \u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_i30N_MK35_Facelift_Kona_N_Turbo_Inlet_Adaptor--product--2069.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30NVeloster_N_Turbo_Inlet_Adaptor_58589jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e  \u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/FORGE-WEB-DIVIDER.png\"\u003e\u003c\/p\u003e  \u003cp\u003eThis aftermarket cold \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Induction_Kit_for_Hyundai_i30N_Kona_N_and_Veloster_N--product--1714.html\" target=\"_blank\"\u003eair intake\u003c\/a\u003e system improves your i30N’s airflow in several key ways. It routes the air more directly into your engine, using a huge 102 mm diameter CNC mandrel bent alloy pipe. The aftermarket system also improves the airflow by adding a high-flow, high efficiency air filter in place of the more restrictive factory air filter. Finally, the cold air intake system is set up to allow cooler air to easily flow into your engine\u003c\/p\u003e  \u003cdiv class=\"pure-g pure-g-gapped\"\u003e \u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e \u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Induction_Kit_for_Hyundai_i30N_Kona_N_and_Veloster_N--product--1714.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Induction_Kit_for_Hyundai_i30N_and_Veloster_N_22112jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e \u003c\/div\u003e  \u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e \u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Induction_Kit_for_Hyundai_i30N_Kona_N_and_Veloster_N--product--1714.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Induction_Kit_for_Hyundai_i30N_and_Veloster_N_11815jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e \u003c\/div\u003e  \u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e \u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Induction_Kit_for_Hyundai_i30N_Kona_N_and_Veloster_N--product--1714.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Induction_Kit_for_Hyundai_i30N_and_Veloster_N_25456jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e","brand":"Forge Motorsport","offers":[{"title":"Black","offer_id":62765057573194,"sku":"FMOC13-BLACK","price":533.25,"currency_code":"GBP","in_stock":true},{"title":"Silver","offer_id":62765057605962,"sku":"FMOC13-RAW","price":533.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/forge-motorsport-oil-cooler-hyundai-i30n-mk3-5-facelift-20-24-coolers-481.webp?v=1784509396"},{"product_id":"forge-motorsport-oil-cooler-hyundai-kona-n-21-23","title":"Forge Motorsport Oil Cooler Hyundai Kona N 21-23","description":"\u003cp style=\"text-align: center;\"\u003e \u003c\/p\u003e  \u003cp\u003eDeveloped, designed, and influenced from our \u003cstrong\u003edirect involvement with BTCC\u003c\/strong\u003e and success with the Hyundai i30N, we are proud to release an oil cooling solution for the Hyundai Kona N.\u003c\/p\u003e  \u003cp\u003eThis oil cooler radiator is lifted straight from our motorsport department, so we know that this product \u003cstrong\u003eperforms well, \u003c\/strong\u003eand has been proven in several race events and winning vehicles over the past years. The cores are durable enough to last full race seasons and are \u003cstrong\u003eperfect for fast road and track use\u003c\/strong\u003e. The cooler has now also been utilised in both of our other Hyundai oil cooling solutions and cleverly redesigned for a 100% plug and play solution for the Kona N.\u003c\/p\u003e  \u003cdiv class=\"pure-g pure-g-gapped\"\u003e \u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e \u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Oil_Cooler_for_Hyundai_Kona_N_76737jpeg.jpg\"\u003e\u003c\/p\u003e \u003c\/div\u003e  \u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e \u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Oil_Cooler_for_Hyundai_Kona_N_27563jpeg.jpg\"\u003e\u003c\/p\u003e \u003c\/div\u003e  \u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e \u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Oil_Cooler_for_Hyundai_Kona_N_85258jpeg.jpg\"\u003e\u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e  \u003cp\u003eDuring our time developing \u003cstrong\u003eworld leading products \u003c\/strong\u003efor the Kona N, we found a significant flaw with the vehicle, especially when tuned, just as we did with the I30N. Oil temperatures can climb to dangerous levels when on track or when driven hard in hotter climates. Rising oil temperatures will result in only one outcome: a reduction of sufficient lubrication of your engines internal components, which, in due course, can potentially lead to engine damage.\u003c\/p\u003e  \u003cp\u003eWe saw oil temperatures \u003cstrong\u003ereduce significantly \u003c\/strong\u003eduring the development of this product when locating the oil cooler heat exchanger at the front of the vehicle’s radiator grill, this allowed for superior air flow. FMOC14 is a must-have product for the keen driver to protect their vehicles longevity, and perform safely and reliably.\u003c\/p\u003e  \u003cdiv class=\"pure-g pure-g-gapped\"\u003e \u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e \u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Oil_Cooler_for_Hyundai_Kona_N_53417jpeg.jpg\"\u003e\u003c\/p\u003e \u003c\/div\u003e  \u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e \u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Oil_Cooler_for_Hyundai_Kona_N_15880jpeg.jpg\"\u003e\u003c\/p\u003e \u003c\/div\u003e  \u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e \u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Oil_Cooler_for_Hyundai_Kona_N_51588jpeg.jpg\"\u003e\u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e  \u003cp\u003eUnlike many oil cooler kits on the market, \u003cstrong\u003eFMOC14 keeps the factory oil to water cooler in position \u003c\/strong\u003e- this essentially doubles your engines oil cooling. This product is not to be confused with a universal oil cooler, FMOC14 has a laser cut aluminium bracket which makes for perfect fitment to the Kona N. The kit is completely bespoke for this vehicle, with perfect length braided oil lines and our intelligent sandwich plate design making for a straightforward installation. The oil cooler is also designed to be mounted in the most efficient way possible as shown in the diagram below. This is to avoid oil cavitation which can also in some cases lead to potential engine damage over a long period of time.\u003c\/p\u003e  \u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/Products\/FMOC11\/OilCooler-Orientation-FMOC11.jpg\"\u003e\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eManufactured in Gloucester, UK,\u003c\/strong\u003e FMOC14 is made to the uppermost standard and is backed up by the Forge Motorsport\u003cstrong\u003e lifetime warranty.\u003c\/strong\u003e\u003c\/p\u003e  \u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThe kit comes with the following:\u003c\/strong\u003e\u003cbr\u003e 1x Forge Aluminium sandwich plate\u003cbr\u003e 1x Twin pass oil cooler \u003cbr\u003e 4x M6x20 fasteners\u003cbr\u003e 4x M6 washers\u003cbr\u003e 2x Oil lines \u003cbr\u003e 4x M6 Rubber Riv nuts\u003cbr\u003e 1x M20x1.5 adaptor\u003cbr\u003e 1x weather strip\u003cbr\u003e All the fixings required and a comprehensive fitting guide\u003c\/p\u003e  \u003cp style=\"text-align: center;\"\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/FORGE-WEB-DIVIDER.png\"\u003e\u003c\/p\u003e  \u003ch1 style=\"text-align: center;\"\u003e\u003cstrong\u003eComplimentary Products\u003c\/strong\u003e\u003c\/h1\u003e  \u003cdiv class=\"pure-g pure-g-gapped\"\u003e \u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e \u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Atmospheric_and_Recirculating_Valve_for_Hyundai_i30N_Kona_N_and_Veloster_N--product--1712.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Atmospheric_and_Recirculating_Valve_for_Hyundai_i30N_and_Veloster_N_24245jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e  \u003cp style=\"text-align: center;\"\u003eOur \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_i20N_Atmospheric_and_Recirculating_Dump_Valve--product--2117.html\" target=\"_blank\"\u003euprated valve\u003c\/a\u003e for the Hyundai i20N, Kona N, and the Veloster N Line has been \u003cb\u003eexpertly manufactured\u003c\/b\u003e and designed in the UK, meaning we can provide the industry leading valve for your vehicle. Specifically designed for the Hyundai, this valve can be used either as a fully atmospheric (blow off) valve, or a recirculating valve!\u003c\/p\u003e \u003c\/div\u003e  \u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e \u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/MultiApplication_Oil_Cap--product--1159.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/MultiApplication_Oil_Cap_18657jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e  \u003cp style=\"text-align: center;\"\u003eThis billet aluminium \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/MultiApplication_Oil_Cap--product--1159.html\" target=\"_blank\"\u003eoil cap\u003c\/a\u003e will replace your OEM one, leaving your engine bay with a premium and high quality aesthetic. \u003cspan style=\"word-spacing: normal;\"\u003eThis cap is available in a choice of body colour (black or polished) and a choice of cap top insert (black or polished). \u003cb\u003eThis perfectly compliments your i230N!\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e \u003c\/div\u003e  \u003cdiv class=\"pure-u-1 pure-u-md-1-3\"\u003e \u003cp\u003e\u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_i30N_MK35_Facelift_Kona_N_Turbo_Inlet_Adaptor--product--2069.html\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/sys\/products\/Hyundai_i30NVeloster_N_Turbo_Inlet_Adaptor_53439jpeg.jpg\"\u003e\u003c\/a\u003e\u003c\/p\u003e  \u003cp style=\"text-align: center;\"\u003eThe \u003ca href=\"https:\/\/www.forgemotorsport.co.uk\/Hyundai_i30N_MK35_Facelift_Kona_N_Turbo_Inlet_Adaptor--product--2069.html\" target=\"_blank\"\u003eFMTIA10\u003c\/a\u003e is proven to benefit the engines performance. With one of the weak links on the i30N and intake system being the restrictive aluminium inlet pipe we found something more was needed on stage 1 and 2 tuned vehicles. \u003cstrong\u003eThe results speak for themselves.\u003c\/strong\u003e\u003cspan style=\"word-spacing: normal;\"\u003e\u003c\/span\u003e\u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e  \u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"https:\/\/www.forgemotorsport.co.uk\/userfiles\/images\/FORGE-WEB-DIVIDER.png\"\u003e\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Black","offer_id":62765067993418,"sku":"FMOC14-BLACK","price":591.16,"currency_code":"GBP","in_stock":true},{"title":"Raw","offer_id":62765068026186,"sku":"FMOC14-RAW","price":591.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/forge-motorsport-oil-cooler-hyundai-kona-n-21-23-black-coolers-228.webp?v=1784509491"},{"product_id":"mishimoto-thermostatic-oil-cooler-kit-ford-mustang-gt-18","title":"Mishimoto Thermostatic Oil Cooler Kit Ford Mustang GT 18+","description":"\u003cp\u003eAdd some extra cooling power to your 2018+ Mustang GT with the Mishimoto Oil Cooler Kit. In 2018, Ford evolved their staple muscle car with a fresh and even more futuristic look on the S550. As the Mustang evolved, we evolved along with it to provide optimal cooling for your modern Mustang.  Our engineers started with designing a heat exchanger from the ground up, to provide the largest oil cooler we have to offer and mounted directly to the front of the vehicle for optimal airflow. From there, we also developed an application specific mounting bracket that also serves as a diversion panel to further improve the airflow through the cooler. Our kit also includes a set of direct fit stainless-steel braided lines for a secure conduit to and from the cooler completed with -10AN fittings for a simplified installation.  Finally, the Mishimoto 2018+ Ford Mustang GT Oil Cooler Kit includes our trusted thermostatic oil sandwich plate to protect against the overcooling of your engine oil. Our kit is available with the option of a silver or black cooler, and is protected under the Mishimoto Lifetime Warranty for a worry-free installation. The Mishimoto engineers designed the heat exchanger for this project from scratch to create the largest oil cooler that we offer, and mounted it in the front of the vehicle where it receives the most airflow. Application-specific braided stainless steel lines transfer the oil from the cooler to the engine and feature -10AN fittings for an easy installation. This 2015 Mustang GT oil cooler kit is available with either a Sleek Silver or Stealth Black cooler and the Mishimoto Thermostatic Oil Sandwich Plate. As with all our 2015 Mustang parts, the Mishimoto Mustang GT Oil Cooler Kit includes the Mishimoto Lifetime Warranty.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Silver Cooler","offer_id":62765096632650,"sku":"MMOC-MUS8-18T","price":747.6,"currency_code":"GBP","in_stock":true},{"title":"Black Cooler","offer_id":62765096665418,"sku":"MMOC-MUS8-18TBK","price":747.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/mishimoto-thermostatic-oil-cooler-kit-ford-mustang-gt-18-coolers-223.webp?v=1784509884"},{"product_id":"mishimoto-thermostatic-oil-cooler-kit-ford-mustang-gt-15-17","title":"Mishimoto Thermostatic Oil Cooler Kit Ford Mustang GT 15-17","description":"\u003cp\u003eNobody likes being sidelined at the track due to high engine oil temperatures. Mishimoto is here to help with a new line of efficient Mustang GT parts. Forced induction setups and some track miles can significantly overheat your oil and wear out your engine, so our engineers have developed an oil cooling solution for your Mustang GT! The Mishimoto engineers designed the heat exchanger for this project from scratch to create the largest oil cooler that we offer, and mounted it in the front of the vehicle where it receives the most airflow. Application-specific braided stainless steel lines transfer the oil from the cooler to the engine and feature -10AN fittings for an easy installation. This 2015 Mustang GT oil cooler kit is available with either a Sleek Silver or Stealth Black cooler and the Mishimoto Thermostatic Oil Sandwich Plate. As with all our 2015 Mustang parts, the Mishimoto Mustang GT Oil Cooler Kit includes the Mishimoto Lifetime Warranty.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Silver Cooler","offer_id":62765096698186,"sku":"MMOC-MUS8-15T","price":747.6,"currency_code":"GBP","in_stock":true},{"title":"Black Cooler","offer_id":62765096730954,"sku":"MMOC-MUS8-15TBK","price":747.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/mishimoto-thermostatic-oil-cooler-kit-ford-mustang-gt-15-17-silver-coolers-244.webp?v=1784509885"},{"product_id":"mishimoto-thermostatic-oil-cooler-kit-ford-silver-mustang-gt-right-hand-drive-15-17","title":"Mishimoto Thermostatic Oil Cooler Kit Ford Silver Mustang GT Right-Hand Drive 15-17","description":"\u003cp\u003eNobody likes being sidelined at the track due to high engine oil temperatures. Mishimoto is here to help with a new line of efficient Mustang GT parts. Forced induction setups and some track miles can significantly overheat your oil and wear out your engine, so our engineers have developed an oil cooling solution for your Mustang GT! The Mishimoto engineers designed the heat exchanger for this project from scratch to create the largest oil cooler that we offer, and mounted it in the front of the vehicle where it receives the most airflow. Application-specific braided stainless steel lines transfer the oil from the cooler to the engine and feature -10AN fittings for an easy installation. This 2015 Mustang GT oil cooler kit is available with either a Sleek Silver or Stealth Black cooler and the Mishimoto Thermostatic Oil Sandwich Plate. As with all our 2015 Mustang parts, the Mishimoto Mustang GT Oil Cooler Kit includes the Mishimoto Lifetime Warranty.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":62765096763722,"sku":"MMOC-MUS8-15TRHD","price":747.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/mishimoto-thermostatic-oil-cooler-kit-ford-silver-mustang-gt-right-hand-drive-15-17-coolers-751.webp?v=1784509886"},{"product_id":"mishimoto-oil-cooler-kit-ford-mustang-ecoboost-15-17","title":"Mishimoto Oil Cooler Kit Ford Mustang EcoBoost 15-17","description":"\u003cp\u003eFor the first time in over 30 years, the iconic Ford Mustang is available with a turbocharged 4 cylinder engine producing over 300 horsepower! Turbocharged 4 cylinder engines can overheat their oil very quickly within a few laps on the track or aggressive street driving. Did you know that unlike the 5.0 liter V8, the 2.3 liter EcoBoost Mustang does not come with a factory oil cooler? Aggressive tunes and some track miles can significantly overheat your oil wear down your engine. Leave it to Mishimoto to come up with an oil cooling solution to your Mustang EcoBoost! The Mishimoto engineers started with a large 19-row oil cooler and mounted it in the front of the vehicle where it receives the most airflow. Application specific braided stainless steel lines transfer the oil from the cooler to the engine and feature -10AN fittings for an easy installation. Mishimoto engineers saw consistent temperature decreases of over 40 degrees Fahrenheit using our non-thermostatic sandwich plate. Proving that this oil cooler kit can wIt'stand the stresses of the most extreme applications. This 2015-2017 Mustang EcoBoost oil cooler kit is available with either a Sleek Silver or Stealth Black cooler and your choice of the MIshimoto Oil Sandwich Plate or the MIshimoto Thermostatic Oil Sandwich Plate. As with all our products, this Mishimoto Mustang EcoBoost Oil Cooler Kit includes the Mishimoto Lifetime Warranty.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Non-Thermostatic \/ Silver Cooler","offer_id":62765096796490,"sku":"MMOC-MUS4-15","price":573.6,"currency_code":"GBP","in_stock":true},{"title":"Non-Thermostatic \/ Black Cooler","offer_id":62765096829258,"sku":"MMOC-MUS4-15BK","price":573.6,"currency_code":"GBP","in_stock":true},{"title":"Thermostatic \/ Silver Cooler","offer_id":62765096862026,"sku":"MMOC-MUS4-15T","price":621.6,"currency_code":"GBP","in_stock":true},{"title":"Thermostatic \/ Black Cooler","offer_id":62765096894794,"sku":"MMOC-MUS4-15TBK","price":621.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/mishimoto-oil-cooler-kit-ford-mustang-ecoboost-15-17-coolers-179.webp?v=1784509887"},{"product_id":"forge-motorsport-oil-cooler-kit-mercedes-a45-cla45-amg-dsg-12-15","title":"Forge Motorsport Oil Cooler Kit Mercedes A45 CLA45 AMG DSG 12-15","description":"\u003cp\u003eWhile developing and testing our range of chargecooler radiators of Mercedes Flag ship A45 AMG (Pre-Facelift), we took the time to develop a DSG oil cooler kit to reduce the high DSG gearbox oil temperature experienced under prolonged and high loads testing. The large 13-row oil cooler is installed in the nearside lower bumper vent aperture that is unused on UK vehicles. This position allows optimum airflow to reduce oil temperatures.\u003c\/p\u003e  \u003cp\u003eThis kit is supplied with all the brackets and hardware required to install the 13-row oil cooler and CNC machined billet aluminium adapter plate. \u003c\/p\u003e  \u003cul\u003e \t\u003cli\u003eQuality powder coated oil cooler housing bracket\u003c\/li\u003e \t\u003cli\u003eCNC machined and anodised adapter plate\u003c\/li\u003e \t\u003cli\u003eCNC machined and anodised banjo fittings\u003c\/li\u003e \t\u003cli\u003ePre-assembled high-quality double braided AN-6 oil lines.\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/FMDSGOC1-Kit_WEB.jpg\"\u003e\u003c\/p\u003e  \u003cp\u003eWe recommend only using the correct Mercedes DSG oil to top up the gearbox (not supplied).\u003cbr\u003e \u003cbr\u003e \u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Install%20Levels\/9.jpg\"\u003e\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":62765103579466,"sku":"FMDSGOC1","price":614.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/forge-motorsport-oil-cooler-kit-mercedes-a45-cla45-amg-dsg-12-15-coolers-287.webp?v=1784509991"},{"product_id":"mishimoto-oil-cooler-kit-ford-mustang-5-0l-11-14","title":"Mishimoto Oil Cooler Kit Ford Mustang 5.0L 11-14","description":"\u003cp\u003eKeep your Coyote-powered Mustang cool on the street and track with the Mishimoto direct-fit oil cooler kit. The 5.0L Mustang is a powerful vehicle that has proven effective on the street, track, drag strip, and drift circuit. Aggressive driving has a direct effect on oil temperatures. High oil temperatures can result in a loss of oil viscosity, which leads to inferior lubrication and premature engine wear. This kit increases oil capacity by 0.75 qt and is proven to reduce oil temperatures by 35 degrees Fahrenheit! The Mishimoto Ford Mustang Oil Cooler Kit features an application-specific mounting bracket that mounts to existing points on the front bumper support. This bracket places the efficient Mishimoto 25-row stacked-plate oil cooler in a location for maximum airflow and fluid temperature reduction. This kit also includes preassembled stainless steel braided oil lines with durable -AN fittings, a billet aluminum thermostatic sandwich plate and all necessary hardware for installation. The included thermostatic sandwich plate provides quicker oil warm-up and enhanced regulation of oil temperatures, perfect for your street or track car. As with all our products, this kit includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Thermostatic \/ Silver Cooler","offer_id":62765119406410,"sku":"MMOC-MUS-11T","price":857.72,"currency_code":"GBP","in_stock":true},{"title":"Thermostatic \/ Black Cooler","offer_id":62765119439178,"sku":"MMOC-MUS-11TBK","price":857.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/mishimoto-oil-cooler-kit-ford-mustang-5-0l-11-14-coolers-869.webp?v=1784510217"},{"product_id":"tegiwa-setrab-oil-cooler-kit-toyota","title":"Tegiwa Setrab\/Mocal Oil Cooler Kit TOYOTA","description":"\u003cp\u003eTEGIWA Oil Cooler kit. Features only the best quality parts. Coolers are either Setrab or Mocal (depending on stock) and sandwich plates are manufactured by Mocal, the universal fitting kit is manufactured right here in the UK and it comes complete with high quality AN fittings and braided hose. They are available with either a normal sandwich plate or a thermostatic sandwich plate. Choose from 13, 16, 19 and a 25 row kit. The kit is a universal fitment, but with the fitting kit it should be easy to mount on all cars.\u003c\/p\u003e","brand":"Tegiwa","offers":[{"title":"13 \/ Normal","offer_id":62774111207754,"sku":"T-1877013-13","price":221.76,"currency_code":"GBP","in_stock":true},{"title":"16 \/ Normal","offer_id":62774111240522,"sku":"T-1877013-16","price":242.55,"currency_code":"GBP","in_stock":true},{"title":"19 \/ Normal","offer_id":62774111273290,"sku":"T-1877013-19","price":263.34,"currency_code":"GBP","in_stock":true},{"title":"25 \/ Normal","offer_id":62774111306058,"sku":"T-1877013-25","price":284.13,"currency_code":"GBP","in_stock":true},{"title":"13 \/ Thermostatic","offer_id":62774111338826,"sku":"T-1877013-13T","price":249.48,"currency_code":"GBP","in_stock":true},{"title":"16 \/ Thermostatic","offer_id":62774111371594,"sku":"T-1877013-16T","price":270.27,"currency_code":"GBP","in_stock":true},{"title":"19 \/ Thermostatic","offer_id":62774111404362,"sku":"T-1877013-19T","price":291.06,"currency_code":"GBP","in_stock":true},{"title":"25 \/ Thermostatic","offer_id":62774111437130,"sku":"T-1877013-25T","price":311.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/tegiwa-setrab-mocal-oil-cooler-kit-toyota-13-normal-coolers-528.webp?v=1784588165"},{"product_id":"hks-oil-cooler-kit-toyota-gt86-subaru-brz-facelift","title":"HKS Oil Cooler Kit Toyota GT86 Subaru BRZ Facelift","description":"New type of HKS Oil Cooler Kit for 86\/BRZ is released. This new kit is able to install to the inner side of the fender!! Recommended for vehicles tuned with GT Superchargers or upgrade turbines, and circuit use that requires precise oil temperature maintenance. \u003cbr\u003e \u003cbr\u003eFeatures \u003cbr\u003e \u003cbr\u003eNewly designed single tube type fitting. Engine dyno tests and experience from D1 racing found that the oil pressure of the FA20 engine is extremely high compared to most conventional mass-produced engines. (Max oil pressure: over 12kgf\/cm ²) New single tube fitting withstanding the high oil pressure was designed and included in this kit. \u003cbr\u003e \u003cbr\u003eInstalling the core to the inner side of the fender enables a vehicle tuned with GT Supercharger to install a front mount type intercooler kit. Also, a special air guide is included to provide higher cooling performance; this kit is also recommended for NA vehicles who enjoy circuit driving. \u003cbr\u003e \u003cbr\u003eSpecial spacer and center bolt are included so the kit parts do not come in contact with the brim on the oil filter installation position when installing the oil cooler attachment. \u003cbr\u003e \u003cbr\u003eThe following parts are included: \u003cbr\u003e \u003cbr\u003e・Oil Cooler Core \u003cbr\u003e・S-type Attachment \u003cbr\u003e \u003cbr\u003e・Spacer  \u003cbr\u003e・Center Bolt \u003cbr\u003e \u003cbr\u003e・Banjo \u003cbr\u003e・Banjo Bolt \u003cbr\u003e \u003cbr\u003e・Bracket \u003cbr\u003e・Air guide \u003cbr\u003e \u003cbr\u003e・Oil Cooler Hose \u003cbr\u003e・Accessory Parts \u003cbr\u003e \u003cbr\u003eThe characteristics of oil temp. and the water temp. \u003cbr\u003e \u003cbr\u003e※ This is the result of the test HKS conducted. The result may vary depending on the test conditions. \u003cbr\u003e \u003cbr\u003e●Test Data \u003cbr\u003e \u003cbr\u003eTest Vehicle \u003cbr\u003e \u003cbr\u003eTOYOTA 86 \u003cbr\u003e \u003cbr\u003eSpecifications \u003cbr\u003e \u003cbr\u003eGT SUPERCHARGER SYSTEM Pro STEP2（300ps) \u003cbr\u003e \u003cbr\u003eSuper Manifold R-Spec\/Legamax Sports S-Tail \u003cbr\u003e \u003cbr\u003eTest Course \u003cbr\u003e \u003cbr\u003eFuji International Speedway Racing Course \u003cbr\u003e \u003cbr\u003eWeather \u003cbr\u003e \u003cbr\u003eSunny Temperature: 12℃ \u003cbr\u003e \u003cbr\u003e* The circuit driving by 86\/BRZ with GT Supercharger which engine output was increased to 300ps was done under conditions that was very difficult to maintain the oil temperature. However, the oil temperature of this vehicle with this oil cooler kit was maintained around 110℃ through the 25 min test drive without any trouble. \u003cbr\u003e \u003cbr\u003eVehicle \u003cbr\u003e \u003cbr\u003eModel \u003cbr\u003e \u003cbr\u003eEngine \u003cbr\u003e \u003cbr\u003eModel Year \u003cbr\u003e \u003cbr\u003eCore Size・Row \u003cbr\u003e \u003cbr\u003eCore Location \u003cbr\u003e \u003cbr\u003eType \u003cbr\u003e \u003cbr\u003eHose Size \u003cbr\u003e \u003cbr\u003eAluminum Air Guide \u003cbr\u003e \u003cbr\u003eCode No. \u003cbr\u003e \u003cbr\u003ePrice \u003cbr\u003e \u003cbr\u003eRemarks \u003cbr\u003e \u003cbr\u003e86 \u003cbr\u003e \u003cbr\u003eZN6 \u003cbr\u003e \u003cbr\u003eFA20 \u003cbr\u003e \u003cbr\u003e16\/08- \u003cbr\u003e \u003cbr\u003e200x200x32・15 \u003cbr\u003e \u003cbr\u003eInside right fender \u003cbr\u003e \u003cbr\u003eS type \u003cbr\u003e \u003cbr\u003e#10 \u003cbr\u003e \u003cbr\u003e○（FRP） \u003cbr\u003e \u003cbr\u003e15004-AT012 \u003cbr\u003e \u003cbr\u003eGT Supercharger system Pro Kit compatible.Need radiator support and resin cover modification.","brand":"HKS","offers":[{"title":"Default Title","offer_id":62774114255178,"sku":"15004-AT012","price":864.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hks-oil-cooler-kit-toyota-gt86-subaru-brz-facelift-coolers-499.webp?v=1784588209"},{"product_id":"hks-s-type-oil-cooler-kit-toyota-gt86-amp-subaru-brz","title":"HKS S-Type Oil Cooler Kit Toyota GT86 \u0026amp; Subaru BRZ","description":"New type of HKS Oil Cooler Kit for 86\/BRZ is released. This new kit is able to install to the inner side of the fender!! Recommended for vehicles tuned with GT Superchargers or upgrade turbines, and circuit use that requires precise oil temperature maintenance. \u003cbr\u003e \u003cbr\u003eFeatures \u003cbr\u003e \u003cbr\u003eNewly designed single tube type fitting. Engine dyno tests and experience from D1 racing found that the oil pressure of the FA20 engine is extremely high compared to most conventional mass-produced engines. (Max oil pressure: over 12kgf\/cm2) New single tube fitting withstanding the high oil pressure was designed and included in this kit. \u003cbr\u003e \u003cbr\u003eInstalling the core to the inner side of the fender enables a vehicle tuned with GT Supercharger to install a front mount type intercooler kit. Also, a special air guide is included to provide higher cooling performance; this kit is also recommended for NA vehicles who enjoy circuit driving. \u003cbr\u003e \u003cbr\u003eSpecial spacer and center bolt are included so the kit parts do not come in contact with the brim on the oil filter installation position when installing the oil cooler attachment.","brand":"HKS","offers":[{"title":"Default Title","offer_id":62774114517322,"sku":"15004-AT011","price":768.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hks-s-type-oil-cooler-kit-toyota-gt86-subaru-brz-coolers-674.webp?v=1784588212"},{"product_id":"hks-oil-cooler-kit-s-type-toyota-gt86-subaru-brz","title":"HKS Oil Cooler Kit S-Type - Toyota GT86 Subaru BRZ","description":"HKS Oil Cooler Kit for Naturally Aspirated vehicles. \u003cbr\u003e \u003cbr\u003eHKS Oil Cooler Kit for 86\/BRZ NA engine was redesigned and is now offered at more affordable price.  \u003cbr\u003eInstallation requires no major modification. All necessary parts for installation are included in the kit. \u003cbr\u003e \u003cbr\u003eFeatures \u003cbr\u003e \u003cbr\u003eNewly designed single tube type fitting. \u003cbr\u003eFrom engine bench tests and experience from D1 racing it is found that the oil pressure of the FA20 engine is extremely high compared to the conventional mass-produced engines. (Max oil pressure: over 12kgf\/cm ²) New single tube fitting withstanding the high oil pressure was newly designed and included in the kit. \u003cbr\u003eIncluding the pre-assembled hose, bracket, and air guide and locating the core in front of the radiator enable an easy installation. Also, there is no major modification required to the chassis. \u003cbr\u003eSpecial spacer and center bolts were designed exclusively for this kit to install the oil cooler attachment without modification. \u003cbr\u003eThe thin 15-layer core improves the cooling performance and makes installation easier. \u003cbr\u003eThis kit is applicable only to the NA engine.(A kit for the supercharged engine is under development)","brand":"HKS","offers":[{"title":"Default Title","offer_id":62774202564938,"sku":"15004-AT010","price":708.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hks-oil-cooler-kit-s-type-toyota-gt86-subaru-brz-coolers-493.webp?v=1784588466"},{"product_id":"mishimoto-performance-oil-cooler-subaru-brz-toyota-gt86-22","title":"Mishimoto Performance Oil Cooler Subaru BRZ Toyota GT86 22+","description":"\u003cp\u003eThe Subaru BRZ and Toyota GR86 have a lineage built on linking corners with seamless drifts and bombing down gravel forest roads chasing sector times. But, despite their heritage, the BRZ and GR86 need a little help keeping up with modern performance needs. The stock oil cooling system on the FA24 uses a liquid-to-liquid cooler that transfers heat from the oil to the engine coolant. The issue is that coolant is doing double-duty trying to cool the engine and its oil and when you spend 20 minutes banging off the limiter and sliding sideways, airflow through the radiator is at a minimum, while heat buildup is at a maximum. The solution is a supplemental cooler whose only job is to cool the engine oil. Luckily, we’ve developed that solution.----This Mishimoto performance oil cooler kit for your 2022+ Subaru BRZ or Toyota GR86 adds a robust 19-row external oil cooler to the otherwise anemic stock system. This cooler takes the load off your engine coolant and adds 0.75 quarts of oil to the system for even greater cooling and lubricating performance. In thermostatic spec, this kit eliminates the liquid-to-liquid cooler, reducing failure points and allowing each system to operate completely independently for maximum performance. For dedicated race cars that need full cooling, right away, the non-thermostatic option retains the stock cooler to help get oil temps and viscosity in operating range fast.----Our direct-fit mounting bracket places the oil cooler front and center in the grille for maximum airflow, while the -10AN braided-steel lines ensure constant flow through the system. The included heat shielding sleeve adds another layer of protection against abrasion while keeping engine bay heat out of the oil.----This performance oil cooler kit includes everything you need for installation, so you can get your 2022+ BRZ or GR86 back on the street or track in no time. Like all Mishimoto products, this kit is backed by our Mishimoto Lifetime Warranty.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Non-Thermostatic \/ Black Cooler","offer_id":62774222029130,"sku":"MMOC-BRZ-22NTBK","price":797.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/mishimoto-performance-oil-cooler-subaru-brz-toyota-gt86-22-non-thermostatic-black-coolers-796.webp?v=1784588843"},{"product_id":"mishimoto-oil-cooler-kit-subaru-brz-toyota-gt86-13","title":"Mishimoto Oil Cooler Kit Subaru BRZ Toyota GT86 13+","description":"\u003cp\u003eMishimoto proudly announces the all-new Direct-Fit Oil Cooler KIt'specifically designed for the Subaru BRZ and Scion FR-S. This direct-fit kit positions a large cooler in the front bumper for ample airflow and optimal cooling, perfect for your street or track BRZ\/FR-S. Properly regulated oil temperatures ensure improved durability and longevity for your stock or modified 2.0L. This kit features all components for seamless bolt-on fitment, including application-specific mounting brackets, stainless steel braided oil lines, a Mishimoto billet aluminum oil sandwich plate, and CNC-machined aluminum spacers for the oil sandwich plate. This oil cooler kIt'substantially decreases oil temperatures, making it ideal for a hot day at the track or a spirited drive in the mountains. The kit is also available with a thermostatic oil sandwich plate for quicker fluid warm-up and additional oil temperature control. This oil cooler kit is the perfect complement to the Mishimoto BRZ\/FR-S performance aluminum radiator and silicone radiator hose kit for the ultimate cooling solution for your vehicle. The Mishimoto Subaru BRZ \/ Scion FR-S Direct-Fit Oil Cooler Kit is offered with both black and silver coolers and includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Non-Thermostatic \/ Silver Cooler","offer_id":62774222061898,"sku":"MMOC-BRZ-13","price":667.2,"currency_code":"GBP","in_stock":true},{"title":"Non-Thermostatic \/ Black Cooler","offer_id":62774222094666,"sku":"MMOC-BRZ-13BK","price":667.2,"currency_code":"GBP","in_stock":true},{"title":"Thermostatic \/ Silver Cooler","offer_id":62774222127434,"sku":"MMOC-BRZ-13T","price":717.6,"currency_code":"GBP","in_stock":true},{"title":"Thermostatic \/ Black Cooler","offer_id":62774222160202,"sku":"MMOC-BRZ-13TBK","price":717.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/mishimoto-oil-cooler-kit-subaru-brz-toyota-gt86-13-coolers-428.webp?v=1784588843"}],"url":"https:\/\/sansomsspecialistparts.co.uk\/collections\/oil-coolers.oembed?page=2","provider":"Sansoms Specialist Parts","version":"1.0","type":"link"}