{"title":"Boxster (987) (05-12)","description":null,"products":[{"product_id":"hawk-performance-hps-5-0-high-performance-street-brake-pads-rear-hb290b-583","title":"HAWK Performance HPS 5.0 High Performance Street Brake Pads Rear - HB290B.583","description":"\u003cp\u003eFor years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter to its limits. The Hawk HPS 5.0 (High Performance Street 5.0) brake pad compound gives your vehicle the greatest possible stopping power and pedal feel without compromising ABS. HPS 5.0 is a Ferro-Carbon compound that provides advanced braking characteristics to enhance the driving experience. This compound combines the safety and quality of aerospace design with the braking technology of motorsports. The results are shorter stopping distances, improved performance under heavy braking conditions, and street car friendly characteristics.\u003c\/p\u003e \u003cp\u003eThe Hawk HPS 5.0 is a good choice if you are looking to increase your street performance to the maximum level possible without suffering the adverse side effects of noise and large amounts of brake dust commonly associated with higher performance pads. The HPS 5.0 will provide increased brake torque and operating temperature when compared to the Hawk HPS compound. The HPS 5.0 compound can withstand light track use as long as you are aware of the signs of over-heating and allow proper cool off time when the pads approach their upper temperature. The Hawk HPS 5.0 compound is not a race compound and it can not withstand prolonged race sessions at high temperatures. The HPS 5.0 Compound will be cleaner than most OEM Pads, but produce more brake dust than the Hawk Ceramic and Hawk HPS.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eAggressive Torque\u003c\/li\u003e \u003cli\u003eGreat Rotor and Pad Wear\u003c\/li\u003e \u003cli\u003eSmooth, Predictable Control\u003c\/li\u003e \u003cli\u003eHigh Rates of Deceleration\u003c\/li\u003e \u003cli\u003eConsistent Release Characteristics\u003c\/li\u003e \u003cli\u003e100-750 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e100-550 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003cdiv\u003e \u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e \u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e \u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e \u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e \u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764395888970,"sku":"HWK-HB290B.583","price":212.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-hps-5-0-high-street-brake-pads-rear-hb290b-583-573.webp?v=1784499409"},{"product_id":"remus-rear-silencer-left-right-porsche-boxster-cayman-987-2-9-09-12","title":"Remus Rear Silencer Left\/Right Porsche Boxster\/Cayman 987 2.9 09-12","description":"\u003cp\u003eFor over two decades REMUS have been producing and manufacturing high quality performance exhaust systems. They also produce OE components and systems for some well known vehicle manufacturers. To say that they know what they're doing would be a bit of an understatement.\u003c\/p\u003e \u003cp\u003eThrough the combination of extensive research, high quality raw materials, modern machining and special process technologies along with highly qualified employees, REMUS produces some of the best performance exhausts on the market that look amazing, sound incredible and give performance gains over OEM exhausts.\u003c\/p\u003e","brand":"REMUS","offers":[{"title":"2 Stainless Steel Tail Pipes 98mm Black Chrome","offer_id":62764397986122,"sku":"6891090500LR-6891091698CB","price":1624.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/remus-rear-silencer-left-right-porsche-boxster-cayman-987-2-9-09-12-stainless-steel-tail-pipes-98mm-black-chrome-exhaust-systems-476.webp?v=1784499453"},{"product_id":"remus-rear-silencer-left-right-porsche-boxster-cayman-987-3-4-s-06-09","title":"Remus Rear Silencer Left\/Right Porsche Boxster\/Cayman 987 3.4 S 06-09","description":"\u003cp\u003eFor over two decades REMUS have been producing and manufacturing high quality performance exhaust systems. They also produce OE components and systems for some well known vehicle manufacturers. To say that they know what they're doing would be a bit of an understatement.\u003c\/p\u003e \u003cp\u003eThrough the combination of extensive research, high quality raw materials, modern machining and special process technologies along with highly qualified employees, REMUS produces some of the best performance exhausts on the market that look amazing, sound incredible and give performance gains over OEM exhausts.\u003c\/p\u003e","brand":"REMUS","offers":[{"title":"2 Tail Pipes 90mm Straight, Rolled Edge, Chromed","offer_id":62764398379338,"sku":"6861061500-002605-2","price":1563.22,"currency_code":"GBP","in_stock":true},{"title":"2 Tail Pipes 98mm Straight, Carbon Insert","offer_id":62764398412106,"sku":"6861061500-002698C-2","price":1638.22,"currency_code":"GBP","in_stock":true},{"title":"2 Tail Pipes 98mm Black Chrome, Straight, Carbon Insert","offer_id":62764398444874,"sku":"6861061500-002698CB-2","price":1666.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/remus-rear-silencer-left-right-porsche-boxster-cayman-987-3-4-s-06-09-exhaust-systems-256.webp?v=1784499455"},{"product_id":"remus-rear-silencer-left-right-porsche-boxster-cayman-987-2-7-06-09","title":"Remus Rear Silencer Left\/Right Porsche Boxster\/Cayman 987 2.7 06-09","description":"\u003cp\u003eFor over two decades REMUS have been producing and manufacturing high quality performance exhaust systems. They also produce OE components and systems for some well known vehicle manufacturers. To say that they know what they're doing would be a bit of an understatement.\u003c\/p\u003e \u003cp\u003eThrough the combination of extensive research, high quality raw materials, modern machining and special process technologies along with highly qualified employees, REMUS produces some of the best performance exhausts on the market that look amazing, sound incredible and give performance gains over OEM exhausts.\u003c\/p\u003e","brand":"REMUS","offers":[{"title":"2 Tail Pipes 90mm Straight, Rolled Edge, Chromed","offer_id":62764398477642,"sku":"6861061500-002605","price":1563.22,"currency_code":"GBP","in_stock":true},{"title":"2 Tail Pipes 98mm Straight, Carbon Insert","offer_id":62764398510410,"sku":"6861061500-002698C","price":1638.22,"currency_code":"GBP","in_stock":true},{"title":"2 Tail Pipes 98mm Black Chrome, Straight, Carbon Insert","offer_id":62764398543178,"sku":"6861061500-002698CB","price":1666.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/remus-rear-silencer-left-right-porsche-boxster-cayman-987-2-7-06-09-exhaust-systems-372.webp?v=1784499455"},{"product_id":"remus-rear-silencer-left-right-porsche-boxster-cayman-987-3-4-s-09-12","title":"Remus Rear Silencer Left\/Right Porsche Boxster\/Cayman 987 3.4 S 09-12","description":"\u003cp\u003eFor over two decades REMUS have been producing and manufacturing high quality performance exhaust systems. They also produce OE components and systems for some well known vehicle manufacturers. To say that they know what they're doing would be a bit of an understatement.\u003c\/p\u003e \u003cp\u003eThrough the combination of extensive research, high quality raw materials, modern machining and special process technologies along with highly qualified employees, REMUS produces some of the best performance exhausts on the market that look amazing, sound incredible and give performance gains over OEM exhausts.\u003c\/p\u003e","brand":"REMUS","offers":[{"title":"2 Stainless Steel Tail Pipes 98mm Black Chrome","offer_id":62764398575946,"sku":"6891090500LR-6891091698CB-1","price":1624.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/remus-rear-silencer-left-right-porsche-boxster-cayman-987-3-4-s-09-12-2-stainless-steel-tail-pipes-98mm-black-chrome-exhaust-systems-547.webp?v=1784499456"},{"product_id":"mfactory-metal-plate-lsd-differential-porsche-987-cayman-boxster","title":"MFactory Metal Plate LSD Differential Porsche 987 Cayman Boxster PDK Only","description":"\u003cp\u003eThrough the smooth and constant distribution of power to the wheels, the MFactory Metal Plate LSD puts the power-to-the-ground and maximises your vehicle's traction where conventional Torsen LSD's succumb to their limits. The Metal Plate LSD is by far the best performing Limited Slip Differential available for a dedicated Circuit, Rally or Drift car\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDiamond Cut to exacting tolerances from Forged High-Nickel-Chromium-Molybdenum Steel\u003c\/strong\u003e\u003cbr\u003ePerfect fitment \u0026amp; finish ensures hassle-free installation \u0026amp; maintenance, each and every time\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDesigned using leading-edge Solidworks 3D CAD \u0026amp; Cosmos FEA software\u003c\/strong\u003e\u003cbr\u003eAdvanced Gear Geometry minimizes parasitic drivetrain losses. Race transmissions built with MFactory components transfer, on average, 1-2% more power to the ground over our competitors!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eStress Tested on loaded dynos\u003c\/strong\u003e\u003cbr\u003eEnsures our differentials are strong enough to handle the shock loads encountered during racing, yet also durable enough to handle the variable loads encountered during day-to-day driving\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFully Adjustable at-the-track\u003c\/strong\u003e\u003cbr\u003eUsers can fully adjust the LSD settings, be it initial pre-load, engagement angles or lock percentage at-the-track without any special tools necessary (disassembly of transmission required)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCoil Spring Pre-Load System (Application Dependant)\u003c\/strong\u003e\u003cbr\u003eThrough the integration of a coil spring pre-load system, gone are the days of on\/off jerkiness, ensuring smooth power transition and maximum throttle response\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e2nd Generation Design (Application Dependant)\u003c\/strong\u003e\u003cbr\u003eThrough the accumulation of over 8 years of ongoing research and statistical analysis, we are proud to introduce our new \u003cstrong\u003ev2 Metal Plate LSD\u003c\/strong\u003e applications for BMW (20-Plate) and Honda (16-Plate). A commonly known issue with Plate type LSD's is the associated NVH (noise, vibration, harshness) during low speed manoeuvres, especially noticeable on a daily driver. With the new MFactory v2 Metal Plate LSD, which uses our new 2nd Generation \u003cem\u003eActive Friction™\u003c\/em\u003e Type-SS Plates (originally developed for our competition Touring Cars), NVH is reduced by as much as 50%\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLow-Cost Maintenance Parts\u003c\/strong\u003e\u003cbr\u003eUnlike with our Helical LSD, the Metal Plate LSD will require regular maintenance to keep performance at its peak. Replacement pre-load springs \u0026amp; plates are always in stock and offered at an affordable price\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCovered by the MFactory Lifetime, Globally Transferable Warranty\u003c\/strong\u003e\u003cbr\u003eWhether used on the Street, Strip or Track, all MFactory Metal Plate LSD's come with a Lifetime, No-Hassle, Globally Transferable Warranty\u003c\/p\u003e \u003cdiv\u003e \u003cstrong\u003eStronger surface coating\u003c\/strong\u003e\u003cbr\u003e \u003c\/div\u003e \u003cdiv\u003e\u003cspan\u003eOur Cold-Forged Spider Gears are now subjected to an advanced ceramic surface coating, significantly decreasing surface friction and increasing surface hardness by 30%!\u003c\/span\u003e\u003c\/div\u003e \u003cdiv\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e \u003cdiv\u003e\u003cstrong\u003eRevised Active Friction Plates\u003c\/strong\u003e\u003c\/div\u003e \u003cdiv\u003e\u003cspan\u003eA commonly known weak point with Plate type LSD's are the ears on the Plates. When subjected to high loads, they can regularly break off from the main plate surface. With the new MFactory v3 Metal Plate LSD, which uses \u003cspan class=\"html-span xdj266r x11i5rnm xat24cr x1mh8g0r xexx8yu x4uap5 x18d9i69 xkhd6sd x1hl2dhg x16tdsg8 x1vvkbs\"\u003e\u003ca class=\"html-a xdj266r x11i5rnm xat24cr x1mh8g0r xexx8yu x4uap5 x18d9i69 xkhd6sd x1hl2dhg x16tdsg8 x1vvkbs\" tabindex=\"-1\"\u003e\u003c\/a\u003e\u003c\/span\u003eour 2nd Generation Active Friction Plates (originally developed for our competition Touring Cars), the surface area of each ear is increased substantially, significantly increasing durability.\u003c\/span\u003e\u003c\/div\u003e \u003cdiv\u003e \u003cdiv\u003e\u003cspan style=\"color: #050505; font-family: system-ui, -apple-system, system-ui, .SFNSText-Regular, sans-serif;\"\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e \u003cdiv\u003e \u003cdiv class=\"x11i5rnm xat24cr x1mh8g0r x1vvkbs xtlvy1s x126k92a\"\u003e \u003cdiv dir=\"auto\"\u003eA commonly known weak point with Plate type LSD's are the ears on the Plates. When subjected to high loads, they can regularly break off from the main plate surface. With the new MFactory v3 Metal Plate LSD, which uses \u003cspan class=\"html-span xdj266r x11i5rnm xat24cr x1mh8g0r xexx8yu x4uap5 x18d9i69 xkhd6sd x1hl2dhg x16tdsg8 x1vvkbs\"\u003e\u003ca class=\"html-a xdj266r x11i5rnm xat24cr x1mh8g0r xexx8yu x4uap5 x18d9i69 xkhd6sd x1hl2dhg x16tdsg8 x1vvkbs\" tabindex=\"-1\"\u003e\u003c\/a\u003e\u003c\/span\u003eour 2nd Generation Active Friction Plates (originally developed for our competition Touring Cars), the surface area of each ear is increased substantially, significantly increasing durability\u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMade from imported Japanese SAE 4320 Steel\u003c\/li\u003e \u003cli\u003eForged, Double Tempered and Super Sub-Zero treated for unsurpassed toughness\u003c\/li\u003e \u003cli\u003eAdvanced Shot Peening technology increases surface hardness\u003c\/li\u003e \u003cli\u003eOnly the highest quality Brighton-Best Hardware is used\u003c\/li\u003e \u003cli\u003eCoil Spring preload system ensures minimal powerloss and maximum response, allowing preload settings from 0-85lbs\u003c\/li\u003e \u003cli\u003eLower initial preload ensures maximum durability and chatter-free operation\u003c\/li\u003e \u003cli\u003eFully rebuildable with a choice of different cam angles\u003c\/li\u003e \u003cli\u003eNew v2 Metal Plate LSD available, utilizing our 2nd Generation \u003cem\u003eActive Friction™\u003c\/em\u003e Type-SS Plates, reducing NVH by as much as 50%\u003c\/li\u003e \u003cli\u003eFully adjustable lock capacity; 20-Plate: 20%\/40%\/60%\/80%\/100% \/ 16-Plate: 25%\/50%\/75%\/100% \/ 12-Plate: 33%\/66%\/100%\u003c\/li\u003e \u003cli\u003eNew \"Ramp Chip\" Design for BMW v2 Metal Plate LSD fitments, allowing fully self-adjustable ramp angle customisation\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHonda B16A2 Fitments:\u003c\/strong\u003e Will not directly fit models previously equipped with an OEM Viscous LSD, and will require a Ring Gear change\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBMW 135i MT\/335i 07+ MT\/DCT\/335d Fitments:\u003c\/strong\u003e Will not directly fit these models due to the oem Ring Gear being welded onto the differential. The Ring Gear will either need to be machined to accept the new LSD, or a new bolted Ring \u0026amp; Pinion used. MFactory Competition Products is one of only 3 companies in the US that can provide this service that meets oem tolerances, and the only US company to manufacture precision aftermarket performance Ring \u0026amp; Pinions (Final Drive Gears) for the BMW\u003c\/p\u003e","brand":"MFactory","offers":[{"title":"1.0\/1.5 Way","offer_id":62764398608714,"sku":"MF-TRS-10S4FA","price":1010.27,"currency_code":"GBP","in_stock":true},{"title":"1.5\/2.0 Way","offer_id":62764398641482,"sku":"MF-TRS-10S4FB","price":1010.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/mfactory-metal-plate-lsd-differential-porsche-987-cayman-boxster-limited-slip-differentials-123.webp?v=1784499456"},{"product_id":"hawk-performance-pc-performance-ceramic-street-brake-pads-rear-hb906z-634","title":"HAWK Performance PC Performance Ceramic Street Brake Pads Rear - HB906Z.634","description":"\u003cdiv\u003e \u003cdiv\u003e \u003cp\u003eHawk understands the needs of today's ceramic brake pad users and has specifically formulated our composite material to meet - and beat - the stringent low noise, ultra-low dust performance standards they have set. Engineered to reduce brake NVH (Noise, Vibration and Harshness),Hawk PC (Performance Ceramic) is a premium disc brake pad that delivers excellent performance mile after mile. Providing a linear friction profile that allows your vehicle's ABS system to operate most effectively, the unique compound has the advantage of never sacrificing power to achieve traditional ceramic pad attributes. With Hawk's PC, you can expect reduced brake pad wear, longer rotor life, and our quietest ride ever.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eThe Hawk PC (Performance Ceramic) is a great compound when your top priority is to minimize brake dust. This compound is a very popular replacement for OEM Brembo packages supplied on performance vehicles such as Corvettes, Mustangs, Challengers, Chargers, Subaru STI, and many others. If you are not looking to have increased brake performance over the stock level and want to virtually eliminate brake dust, the Hawk Performance Ceramic is what you are looking for.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cul\u003e \u003cli\u003eExtremely Quite\u003c\/li\u003e \u003cli\u003eUltra-low Dust\u003c\/li\u003e \u003cli\u003eImproved Stopping Power\u003c\/li\u003e \u003cli\u003eGentle on rotors\u003c\/li\u003e \u003cli\u003eStable Friction Output\u003c\/li\u003e \u003cli\u003e100-650 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e100-450 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e \u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e \u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e \u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e \u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764399329610,"sku":"HWK-HB906Z.634","price":201.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-pc-ceramic-street-brake-pads-rear-hb906z-634-310.webp?v=1784499462"},{"product_id":"hawk-performance-pc-performance-ceramic-street-brake-pads-rear-hb290z-606","title":"HAWK Performance PC Performance Ceramic Street Brake Pads Rear - HB290Z.606","description":"\u003cdiv\u003e \u003cdiv\u003e \u003cp\u003eHawk understands the needs of today's ceramic brake pad users and has specifically formulated our composite material to meet - and beat - the stringent low noise, ultra-low dust performance standards they have set. Engineered to reduce brake NVH (Noise, Vibration and Harshness),Hawk PC (Performance Ceramic) is a premium disc brake pad that delivers excellent performance mile after mile. Providing a linear friction profile that allows your vehicle's ABS system to operate most effectively, the unique compound has the advantage of never sacrificing power to achieve traditional ceramic pad attributes. With Hawk's PC, you can expect reduced brake pad wear, longer rotor life, and our quietest ride ever.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eThe Hawk PC (Performance Ceramic) is a great compound when your top priority is to minimize brake dust. This compound is a very popular replacement for OEM Brembo packages supplied on performance vehicles such as Corvettes, Mustangs, Challengers, Chargers, Subaru STI, and many others. If you are not looking to have increased brake performance over the stock level and want to virtually eliminate brake dust, the Hawk Performance Ceramic is what you are looking for.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cul\u003e \u003cli\u003eExtremely Quite\u003c\/li\u003e \u003cli\u003eUltra-low Dust\u003c\/li\u003e \u003cli\u003eImproved Stopping Power\u003c\/li\u003e \u003cli\u003eGentle on rotors\u003c\/li\u003e \u003cli\u003eStable Friction Output\u003c\/li\u003e \u003cli\u003e100-650 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e100-450 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e \u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e \u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e \u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e \u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764399362378,"sku":"HWK-HB290Z.606","price":219.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-pc-ceramic-street-brake-pads-rear-hb290z-606-545.webp?v=1784499463"},{"product_id":"hawk-performance-pc-performance-ceramic-street-brake-pads-front-hb664z-634","title":"HAWK Performance PC Performance Ceramic Street Brake Pads Front - HB664Z.634","description":"\u003cdiv\u003e \u003cdiv\u003e \u003cp\u003eHawk understands the needs of today's ceramic brake pad users and has specifically formulated our composite material to meet - and beat - the stringent low noise, ultra-low dust performance standards they have set. Engineered to reduce brake NVH (Noise, Vibration and Harshness),Hawk PC (Performance Ceramic) is a premium disc brake pad that delivers excellent performance mile after mile. Providing a linear friction profile that allows your vehicle's ABS system to operate most effectively, the unique compound has the advantage of never sacrificing power to achieve traditional ceramic pad attributes. With Hawk's PC, you can expect reduced brake pad wear, longer rotor life, and our quietest ride ever.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eThe Hawk PC (Performance Ceramic) is a great compound when your top priority is to minimize brake dust. This compound is a very popular replacement for OEM Brembo packages supplied on performance vehicles such as Corvettes, Mustangs, Challengers, Chargers, Subaru STI, and many others. If you are not looking to have increased brake performance over the stock level and want to virtually eliminate brake dust, the Hawk Performance Ceramic is what you are looking for.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cul\u003e \u003cli\u003eExtremely Quite\u003c\/li\u003e \u003cli\u003eUltra-low Dust\u003c\/li\u003e \u003cli\u003eImproved Stopping Power\u003c\/li\u003e \u003cli\u003eGentle on rotors\u003c\/li\u003e \u003cli\u003eStable Friction Output\u003c\/li\u003e \u003cli\u003e100-650 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e100-450 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e \u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e \u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e \u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e \u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764399395146,"sku":"HWK-HB664Z.634","price":238.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-pc-ceramic-street-brake-pads-front-hb664z-634-537.webp?v=1784499464"},{"product_id":"hawk-performance-pc-performance-ceramic-street-brake-pads-front-hb550z-634","title":"HAWK Performance PC Performance Ceramic Street Brake Pads Front - HB550Z.634","description":"\u003cdiv\u003e \u003cdiv\u003e \u003cp\u003eHawk understands the needs of today's ceramic brake pad users and has specifically formulated our composite material to meet - and beat - the stringent low noise, ultra-low dust performance standards they have set. Engineered to reduce brake NVH (Noise, Vibration and Harshness),Hawk PC (Performance Ceramic) is a premium disc brake pad that delivers excellent performance mile after mile. Providing a linear friction profile that allows your vehicle's ABS system to operate most effectively, the unique compound has the advantage of never sacrificing power to achieve traditional ceramic pad attributes. With Hawk's PC, you can expect reduced brake pad wear, longer rotor life, and our quietest ride ever.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eThe Hawk PC (Performance Ceramic) is a great compound when your top priority is to minimize brake dust. This compound is a very popular replacement for OEM Brembo packages supplied on performance vehicles such as Corvettes, Mustangs, Challengers, Chargers, Subaru STI, and many others. If you are not looking to have increased brake performance over the stock level and want to virtually eliminate brake dust, the Hawk Performance Ceramic is what you are looking for.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cul\u003e \u003cli\u003eExtremely Quite\u003c\/li\u003e \u003cli\u003eUltra-low Dust\u003c\/li\u003e \u003cli\u003eImproved Stopping Power\u003c\/li\u003e \u003cli\u003eGentle on rotors\u003c\/li\u003e \u003cli\u003eStable Friction Output\u003c\/li\u003e \u003cli\u003e100-650 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e100-450 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e \u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e \u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e \u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e \u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764399427914,"sku":"HWK-HB550Z.634","price":199.12,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-pc-ceramic-street-brake-pads-front-hb550z-634-357.webp?v=1784499464"},{"product_id":"hawk-performance-pc-performance-ceramic-street-brake-pads-front-hb289z-610","title":"HAWK Performance PC Performance Ceramic Street Brake Pads Front - HB289Z.610","description":"\u003cdiv\u003e \u003cdiv\u003e \u003cp\u003eHawk understands the needs of today's ceramic brake pad users and has specifically formulated our composite material to meet - and beat - the stringent low noise, ultra-low dust performance standards they have set. Engineered to reduce brake NVH (Noise, Vibration and Harshness),Hawk PC (Performance Ceramic) is a premium disc brake pad that delivers excellent performance mile after mile. Providing a linear friction profile that allows your vehicle's ABS system to operate most effectively, the unique compound has the advantage of never sacrificing power to achieve traditional ceramic pad attributes. With Hawk's PC, you can expect reduced brake pad wear, longer rotor life, and our quietest ride ever.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eThe Hawk PC (Performance Ceramic) is a great compound when your top priority is to minimize brake dust. This compound is a very popular replacement for OEM Brembo packages supplied on performance vehicles such as Corvettes, Mustangs, Challengers, Chargers, Subaru STI, and many others. If you are not looking to have increased brake performance over the stock level and want to virtually eliminate brake dust, the Hawk Performance Ceramic is what you are looking for.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cul\u003e \u003cli\u003eExtremely Quite\u003c\/li\u003e \u003cli\u003eUltra-low Dust\u003c\/li\u003e \u003cli\u003eImproved Stopping Power\u003c\/li\u003e \u003cli\u003eGentle on rotors\u003c\/li\u003e \u003cli\u003eStable Friction Output\u003c\/li\u003e \u003cli\u003e100-650 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e100-450 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e \u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e \u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e \u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e \u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764399460682,"sku":"HWK-HB289Z.610","price":217.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-pc-ceramic-street-brake-pads-front-hb289z-610-389.webp?v=1784499465"},{"product_id":"hawk-performance-ht-10-motorsports-brake-pads-front-hb550s-634","title":"HAWK Performance HT-10 Motorsports Brake Pads Front - HB550S.634","description":"\u003cdiv\u003e \u003cp\u003eFor linear in-braking in a medium temperature range, look no further than HT-10. It delivers smooth, controllable initial bite and consistent pedal feel. It's no wonder Hawk's legacy friction products have become the choice of champions.\u003c\/p\u003e \u003c\/div\u003e \u003cul\u003e \u003cli\u003eGood Static and Dynamic Coefficient of Friction\u003c\/li\u003e \u003cli\u003eExcellent modulation characteristics\u003c\/li\u003e \u003cli\u003e300-1300 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e300-1100 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003cdiv\u003e \u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e \u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e \u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e li\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads \u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764399493450,"sku":"HWK-HB550S.634","price":271.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-ht-10-motorsports-brake-pads-front-hb550s-634-196.webp?v=1784499466"},{"product_id":"hawk-performance-ht-10-motorsports-brake-pads-front-hb289s-610","title":"HAWK Performance HT-10 Motorsports Brake Pads Front - HB289S.610","description":"\u003cdiv\u003e \u003cp\u003eFor linear in-braking in a medium temperature range, look no further than HT-10. It delivers smooth, controllable initial bite and consistent pedal feel. It's no wonder Hawk's legacy friction products have become the choice of champions.\u003c\/p\u003e \u003c\/div\u003e \u003cul\u003e \u003cli\u003eGood Static and Dynamic Coefficient of Friction\u003c\/li\u003e \u003cli\u003eExcellent modulation characteristics\u003c\/li\u003e \u003cli\u003e300-1300 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e300-1100 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003cdiv\u003e \u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e \u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e \u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e li\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads \u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764399526218,"sku":"HWK-HB289S.610","price":330.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-ht-10-motorsports-brake-pads-front-hb289s-610-989.webp?v=1784499467"},{"product_id":"hawk-performance-hps-high-performance-street-brake-pads-rear-hb290f-606","title":"HAWK Performance HPS High Performance Street Brake Pads Rear - HB290F.606","description":"\u003cdiv\u003e \u003cp\u003eHawk HPS (High Performance Street) brake pads are world renowned for increasing stopping power on your street driven vehicle. Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance's HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Aerospace and Motorsports severe-duty friction technology. The High Performance Street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you'll have a highly durable brake pad with less brake dust.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eThe Hawk HPS compound, in most cases, will provide increased brake torque and operating temperature when compared to OEM pads. There will also be a decrease in brake dust. With an upper end operating temperature of 800-900 Deg F, the HPS compound can withstand light track use as long as you are aware of the signs of over-heating and allow proper cool off time when the pads approach their upper temperature. The Hawk HPS compound is not a race compound and it can not withstand prolonged race sessions at high temperatures. Concerning brake dust, the HPS will be cleaner than your OEM Pads, but create more dust than the Hawk Ceramic compound. The performance improvement over Hawk Ceramic comes at the cost of increased dust production.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cul\u003e \u003cli\u003eSmooth braking Feel\u003c\/li\u003e \u003cli\u003eExcellent for Spirited Driving\u003c\/li\u003e \u003cli\u003eGentle on Pads and Rotors\u003c\/li\u003e \u003cli\u003eConsistent Release Characteristics\u003c\/li\u003e \u003cli\u003eIncreased Stopping Power\u003c\/li\u003e \u003cli\u003e100-700 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e100-500 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e \u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e \u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e \u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e \u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764399558986,"sku":"HWK-HB290F.606","price":172.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-hps-high-street-brake-pads-rear-hb290f-606-741.webp?v=1784499468"},{"product_id":"hawk-performance-hps-high-performance-street-brake-pads-front-hb664f-634","title":"HAWK Performance HPS High Performance Street Brake Pads Front - HB664F.634","description":"\u003cdiv\u003e \u003cp\u003eHawk HPS (High Performance Street) brake pads are world renowned for increasing stopping power on your street driven vehicle. Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance's HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Aerospace and Motorsports severe-duty friction technology. The High Performance Street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you'll have a highly durable brake pad with less brake dust.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eThe Hawk HPS compound, in most cases, will provide increased brake torque and operating temperature when compared to OEM pads. There will also be a decrease in brake dust. With an upper end operating temperature of 800-900 Deg F, the HPS compound can withstand light track use as long as you are aware of the signs of over-heating and allow proper cool off time when the pads approach their upper temperature. The Hawk HPS compound is not a race compound and it can not withstand prolonged race sessions at high temperatures. Concerning brake dust, the HPS will be cleaner than your OEM Pads, but create more dust than the Hawk Ceramic compound. The performance improvement over Hawk Ceramic comes at the cost of increased dust production.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cul\u003e \u003cli\u003eSmooth braking Feel\u003c\/li\u003e \u003cli\u003eExcellent for Spirited Driving\u003c\/li\u003e \u003cli\u003eGentle on Pads and Rotors\u003c\/li\u003e \u003cli\u003eConsistent Release Characteristics\u003c\/li\u003e \u003cli\u003eIncreased Stopping Power\u003c\/li\u003e \u003cli\u003e100-700 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e100-500 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e \u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e \u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e \u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e \u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764399591754,"sku":"HWK-HB664F.634","price":235.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-hps-high-street-brake-pads-front-hb664f-634-869.webp?v=1784499469"},{"product_id":"hawk-performance-hps-high-performance-street-brake-pads-front-hb550f-634","title":"HAWK Performance HPS High Performance Street Brake Pads Front - HB550F.634","description":"\u003cdiv\u003e \u003cp\u003eHawk HPS (High Performance Street) brake pads are world renowned for increasing stopping power on your street driven vehicle. Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance's HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Aerospace and Motorsports severe-duty friction technology. The High Performance Street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you'll have a highly durable brake pad with less brake dust.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eThe Hawk HPS compound, in most cases, will provide increased brake torque and operating temperature when compared to OEM pads. There will also be a decrease in brake dust. With an upper end operating temperature of 800-900 Deg F, the HPS compound can withstand light track use as long as you are aware of the signs of over-heating and allow proper cool off time when the pads approach their upper temperature. The Hawk HPS compound is not a race compound and it can not withstand prolonged race sessions at high temperatures. Concerning brake dust, the HPS will be cleaner than your OEM Pads, but create more dust than the Hawk Ceramic compound. The performance improvement over Hawk Ceramic comes at the cost of increased dust production.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cul\u003e \u003cli\u003eSmooth braking Feel\u003c\/li\u003e \u003cli\u003eExcellent for Spirited Driving\u003c\/li\u003e \u003cli\u003eGentle on Pads and Rotors\u003c\/li\u003e \u003cli\u003eConsistent Release Characteristics\u003c\/li\u003e \u003cli\u003eIncreased Stopping Power\u003c\/li\u003e \u003cli\u003e100-700 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e100-500 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e \u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e \u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e \u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e \u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764399624522,"sku":"HWK-HB550F.634","price":177.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-hps-high-street-brake-pads-front-hb550f-634-305.webp?v=1784499470"},{"product_id":"hawk-performance-hps-high-performance-street-brake-pads-front-hb289f-610","title":"HAWK Performance HPS High Performance Street Brake Pads Front - HB289F.610","description":"\u003cdiv\u003e \u003cp\u003eHawk HPS (High Performance Street) brake pads are world renowned for increasing stopping power on your street driven vehicle. Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance's HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Aerospace and Motorsports severe-duty friction technology. The High Performance Street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you'll have a highly durable brake pad with less brake dust.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eThe Hawk HPS compound, in most cases, will provide increased brake torque and operating temperature when compared to OEM pads. There will also be a decrease in brake dust. With an upper end operating temperature of 800-900 Deg F, the HPS compound can withstand light track use as long as you are aware of the signs of over-heating and allow proper cool off time when the pads approach their upper temperature. The Hawk HPS compound is not a race compound and it can not withstand prolonged race sessions at high temperatures. Concerning brake dust, the HPS will be cleaner than your OEM Pads, but create more dust than the Hawk Ceramic compound. The performance improvement over Hawk Ceramic comes at the cost of increased dust production.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cul\u003e \u003cli\u003eSmooth braking Feel\u003c\/li\u003e \u003cli\u003eExcellent for Spirited Driving\u003c\/li\u003e \u003cli\u003eGentle on Pads and Rotors\u003c\/li\u003e \u003cli\u003eConsistent Release Characteristics\u003c\/li\u003e \u003cli\u003eIncreased Stopping Power\u003c\/li\u003e \u003cli\u003e100-700 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e100-500 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e \u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e \u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e \u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e \u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764399657290,"sku":"HWK-HB289F.610","price":216.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-hps-high-street-brake-pads-front-hb289f-610-230.webp?v=1784499471"},{"product_id":"hawk-performance-hps-5-0-high-performance-street-brake-pads-rear-hb906b-634","title":"HAWK Performance HPS 5.0 High Performance Street Brake Pads Rear - HB906B.634","description":"\u003cp\u003eFor years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter to its limits. The Hawk HPS 5.0 (High Performance Street 5.0) brake pad compound gives your vehicle the greatest possible stopping power and pedal feel without compromising ABS. HPS 5.0 is a Ferro-Carbon compound that provides advanced braking characteristics to enhance the driving experience. This compound combines the safety and quality of aerospace design with the braking technology of motorsports. The results are shorter stopping distances, improved performance under heavy braking conditions, and street car friendly characteristics.\u003c\/p\u003e \u003cp\u003eThe Hawk HPS 5.0 is a good choice if you are looking to increase your street performance to the maximum level possible without suffering the adverse side effects of noise and large amounts of brake dust commonly associated with higher performance pads. The HPS 5.0 will provide increased brake torque and operating temperature when compared to the Hawk HPS compound. The HPS 5.0 compound can withstand light track use as long as you are aware of the signs of over-heating and allow proper cool off time when the pads approach their upper temperature. The Hawk HPS 5.0 compound is not a race compound and it can not withstand prolonged race sessions at high temperatures. The HPS 5.0 Compound will be cleaner than most OEM Pads, but produce more brake dust than the Hawk Ceramic and Hawk HPS.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eAggressive Torque\u003c\/li\u003e \u003cli\u003eGreat Rotor and Pad Wear\u003c\/li\u003e \u003cli\u003eSmooth, Predictable Control\u003c\/li\u003e \u003cli\u003eHigh Rates of Deceleration\u003c\/li\u003e \u003cli\u003eConsistent Release Characteristics\u003c\/li\u003e \u003cli\u003e100-750 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e100-550 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003cdiv\u003e \u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e \u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e \u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e \u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e \u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764399690058,"sku":"HWK-HB906B.634","price":222.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-hps-5-0-high-street-brake-pads-rear-hb906b-634-645.webp?v=1784499472"},{"product_id":"hawk-performance-hps-5-0-high-performance-street-brake-pads-front-hb664b-634","title":"HAWK Performance HPS 5.0 High Performance Street Brake Pads Front - HB664B.634","description":"\u003cp\u003eFor years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter to its limits. The Hawk HPS 5.0 (High Performance Street 5.0) brake pad compound gives your vehicle the greatest possible stopping power and pedal feel without compromising ABS. HPS 5.0 is a Ferro-Carbon compound that provides advanced braking characteristics to enhance the driving experience. This compound combines the safety and quality of aerospace design with the braking technology of motorsports. The results are shorter stopping distances, improved performance under heavy braking conditions, and street car friendly characteristics.\u003c\/p\u003e \u003cp\u003eThe Hawk HPS 5.0 is a good choice if you are looking to increase your street performance to the maximum level possible without suffering the adverse side effects of noise and large amounts of brake dust commonly associated with higher performance pads. The HPS 5.0 will provide increased brake torque and operating temperature when compared to the Hawk HPS compound. The HPS 5.0 compound can withstand light track use as long as you are aware of the signs of over-heating and allow proper cool off time when the pads approach their upper temperature. The Hawk HPS 5.0 compound is not a race compound and it can not withstand prolonged race sessions at high temperatures. The HPS 5.0 Compound will be cleaner than most OEM Pads, but produce more brake dust than the Hawk Ceramic and Hawk HPS.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eAggressive Torque\u003c\/li\u003e \u003cli\u003eGreat Rotor and Pad Wear\u003c\/li\u003e \u003cli\u003eSmooth, Predictable Control\u003c\/li\u003e \u003cli\u003eHigh Rates of Deceleration\u003c\/li\u003e \u003cli\u003eConsistent Release Characteristics\u003c\/li\u003e \u003cli\u003e100-750 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e100-550 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003cdiv\u003e \u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e \u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e \u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e \u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e \u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764399722826,"sku":"HWK-HB664B.634","price":237.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-hps-5-0-high-street-brake-pads-front-hb664b-634-525.webp?v=1784499473"},{"product_id":"hawk-performance-hps-5-0-high-performance-street-brake-pads-front-hb550b-634","title":"HAWK Performance HPS 5.0 High Performance Street Brake Pads Front - HB550B.634","description":"\u003cp\u003eFor years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter to its limits. The Hawk HPS 5.0 (High Performance Street 5.0) brake pad compound gives your vehicle the greatest possible stopping power and pedal feel without compromising ABS. HPS 5.0 is a Ferro-Carbon compound that provides advanced braking characteristics to enhance the driving experience. This compound combines the safety and quality of aerospace design with the braking technology of motorsports. The results are shorter stopping distances, improved performance under heavy braking conditions, and street car friendly characteristics.\u003c\/p\u003e \u003cp\u003eThe Hawk HPS 5.0 is a good choice if you are looking to increase your street performance to the maximum level possible without suffering the adverse side effects of noise and large amounts of brake dust commonly associated with higher performance pads. The HPS 5.0 will provide increased brake torque and operating temperature when compared to the Hawk HPS compound. The HPS 5.0 compound can withstand light track use as long as you are aware of the signs of over-heating and allow proper cool off time when the pads approach their upper temperature. The Hawk HPS 5.0 compound is not a race compound and it can not withstand prolonged race sessions at high temperatures. The HPS 5.0 Compound will be cleaner than most OEM Pads, but produce more brake dust than the Hawk Ceramic and Hawk HPS.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eAggressive Torque\u003c\/li\u003e \u003cli\u003eGreat Rotor and Pad Wear\u003c\/li\u003e \u003cli\u003eSmooth, Predictable Control\u003c\/li\u003e \u003cli\u003eHigh Rates of Deceleration\u003c\/li\u003e \u003cli\u003eConsistent Release Characteristics\u003c\/li\u003e \u003cli\u003e100-750 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e100-550 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003cdiv\u003e \u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e \u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e \u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e \u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e \u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764399919434,"sku":"HWK-HB550B.634","price":193.12,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-hps-5-0-high-street-brake-pads-front-hb550b-634-100.webp?v=1784499474"},{"product_id":"hawk-performance-hps-5-0-high-performance-street-brake-pads-front-hb289b-610","title":"HAWK Performance HPS 5.0 High Performance Street Brake Pads Front - HB289B.610","description":"\u003cp\u003eFor years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter to its limits. The Hawk HPS 5.0 (High Performance Street 5.0) brake pad compound gives your vehicle the greatest possible stopping power and pedal feel without compromising ABS. HPS 5.0 is a Ferro-Carbon compound that provides advanced braking characteristics to enhance the driving experience. This compound combines the safety and quality of aerospace design with the braking technology of motorsports. The results are shorter stopping distances, improved performance under heavy braking conditions, and street car friendly characteristics.\u003c\/p\u003e \u003cp\u003eThe Hawk HPS 5.0 is a good choice if you are looking to increase your street performance to the maximum level possible without suffering the adverse side effects of noise and large amounts of brake dust commonly associated with higher performance pads. The HPS 5.0 will provide increased brake torque and operating temperature when compared to the Hawk HPS compound. The HPS 5.0 compound can withstand light track use as long as you are aware of the signs of over-heating and allow proper cool off time when the pads approach their upper temperature. The Hawk HPS 5.0 compound is not a race compound and it can not withstand prolonged race sessions at high temperatures. The HPS 5.0 Compound will be cleaner than most OEM Pads, but produce more brake dust than the Hawk Ceramic and Hawk HPS.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eAggressive Torque\u003c\/li\u003e \u003cli\u003eGreat Rotor and Pad Wear\u003c\/li\u003e \u003cli\u003eSmooth, Predictable Control\u003c\/li\u003e \u003cli\u003eHigh Rates of Deceleration\u003c\/li\u003e \u003cli\u003eConsistent Release Characteristics\u003c\/li\u003e \u003cli\u003e100-750 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e100-550 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003cdiv\u003e \u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e \u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e \u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e \u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e \u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764399952202,"sku":"HWK-HB289B.610","price":216.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-hps-5-0-high-street-brake-pads-front-hb289b-610-151.webp?v=1784499475"},{"product_id":"hawk-performance-hp-plus-road-and-track-brake-pads-rear-hb906n-634","title":"HAWK Performance HP Plus Road and Track Brake Pads Rear - HB906N.634","description":"\u003cdiv\u003e \u003cp\u003eThe Hawk Performance HP Plus brake pad compound is ideal for Autocross and Track Day drivers looking for a high performance race compound that can take the heat of the track and get you home safely without having to change the pads. HP Plus utilizes a unique Ferro-Carbon, High-Tech friction material that was developed and manufactured for sport driving in autocross, Solo II, and track day applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eHP Plus is popular with enthusiasts that are looking for excellent street performance or wanting take their car auto-crossing or to a track day and not have to worry about changing pads. The HP Plus will provide a very noticeable increase in brake torque and temperature range when compared to OEM pads. Usually recommended to beginners who have very little to no track experience and are looking for an upgrade over stock.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cul\u003e \u003cli\u003eLow to Mid Temperature Range\u003c\/li\u003e \u003cli\u003eFade Resistant\u003c\/li\u003e \u003cli\u003eSmooth, Predictable Torque\u003c\/li\u003e \u003cli\u003eIdeal for Autocross\u003c\/li\u003e \u003cli\u003e100-800 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e300-600 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e \u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e \u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e \u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e \u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764399984970,"sku":"HWK-HB906N.634","price":217.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-hp-plus-road-and-track-brake-pads-rear-hb906n-634-996.webp?v=1784499476"},{"product_id":"hawk-performance-hp-plus-road-and-track-brake-pads-rear-hb290n-606","title":"HAWK Performance HP Plus Road and Track Brake Pads Rear - HB290N.606","description":"\u003cdiv\u003e \u003cp\u003eThe Hawk Performance HP Plus brake pad compound is ideal for Autocross and Track Day drivers looking for a high performance race compound that can take the heat of the track and get you home safely without having to change the pads. HP Plus utilizes a unique Ferro-Carbon, High-Tech friction material that was developed and manufactured for sport driving in autocross, Solo II, and track day applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eHP Plus is popular with enthusiasts that are looking for excellent street performance or wanting take their car auto-crossing or to a track day and not have to worry about changing pads. The HP Plus will provide a very noticeable increase in brake torque and temperature range when compared to OEM pads. Usually recommended to beginners who have very little to no track experience and are looking for an upgrade over stock.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cul\u003e \u003cli\u003eLow to Mid Temperature Range\u003c\/li\u003e \u003cli\u003eFade Resistant\u003c\/li\u003e \u003cli\u003eSmooth, Predictable Torque\u003c\/li\u003e \u003cli\u003eIdeal for Autocross\u003c\/li\u003e \u003cli\u003e100-800 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e300-600 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e \u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e \u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e \u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e \u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764400017738,"sku":"HWK-HB290N.606","price":220.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-hp-plus-road-and-track-brake-pads-rear-hb290n-606-978.webp?v=1784499477"},{"product_id":"hawk-performance-hp-plus-road-and-track-brake-pads-front-hb664n-634","title":"HAWK Performance HP Plus Road and Track Brake Pads Front - HB664N.634","description":"\u003cdiv\u003e \u003cp\u003eThe Hawk Performance HP Plus brake pad compound is ideal for Autocross and Track Day drivers looking for a high performance race compound that can take the heat of the track and get you home safely without having to change the pads. HP Plus utilizes a unique Ferro-Carbon, High-Tech friction material that was developed and manufactured for sport driving in autocross, Solo II, and track day applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eHP Plus is popular with enthusiasts that are looking for excellent street performance or wanting take their car auto-crossing or to a track day and not have to worry about changing pads. The HP Plus will provide a very noticeable increase in brake torque and temperature range when compared to OEM pads. Usually recommended to beginners who have very little to no track experience and are looking for an upgrade over stock.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cul\u003e \u003cli\u003eLow to Mid Temperature Range\u003c\/li\u003e \u003cli\u003eFade Resistant\u003c\/li\u003e \u003cli\u003eSmooth, Predictable Torque\u003c\/li\u003e \u003cli\u003eIdeal for Autocross\u003c\/li\u003e \u003cli\u003e100-800 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e300-600 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e \u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e \u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e \u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e \u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764400050506,"sku":"HWK-HB664N.634","price":269.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-hp-plus-road-and-track-brake-pads-front-hb664n-634-687.webp?v=1784499478"},{"product_id":"hawk-performance-hp-plus-road-and-track-brake-pads-front-hb550n-634","title":"HAWK Performance HP Plus Road and Track Brake Pads Front - HB550N.634","description":"\u003cdiv\u003e \u003cp\u003eThe Hawk Performance HP Plus brake pad compound is ideal for Autocross and Track Day drivers looking for a high performance race compound that can take the heat of the track and get you home safely without having to change the pads. HP Plus utilizes a unique Ferro-Carbon, High-Tech friction material that was developed and manufactured for sport driving in autocross, Solo II, and track day applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eHP Plus is popular with enthusiasts that are looking for excellent street performance or wanting take their car auto-crossing or to a track day and not have to worry about changing pads. The HP Plus will provide a very noticeable increase in brake torque and temperature range when compared to OEM pads. Usually recommended to beginners who have very little to no track experience and are looking for an upgrade over stock.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cul\u003e \u003cli\u003eLow to Mid Temperature Range\u003c\/li\u003e \u003cli\u003eFade Resistant\u003c\/li\u003e \u003cli\u003eSmooth, Predictable Torque\u003c\/li\u003e \u003cli\u003eIdeal for Autocross\u003c\/li\u003e \u003cli\u003e100-800 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e300-600 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e \u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e \u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e \u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e \u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764400083274,"sku":"HWK-HB550N.634","price":217.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-hp-plus-road-and-track-brake-pads-front-hb550n-634-451.webp?v=1784499479"},{"product_id":"hawk-performance-hp-plus-road-and-track-brake-pads-front-hb289n-610","title":"HAWK Performance HP Plus Road and Track Brake Pads Front - HB289N.610","description":"\u003cdiv\u003e \u003cp\u003eThe Hawk Performance HP Plus brake pad compound is ideal for Autocross and Track Day drivers looking for a high performance race compound that can take the heat of the track and get you home safely without having to change the pads. HP Plus utilizes a unique Ferro-Carbon, High-Tech friction material that was developed and manufactured for sport driving in autocross, Solo II, and track day applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eHP Plus is popular with enthusiasts that are looking for excellent street performance or wanting take their car auto-crossing or to a track day and not have to worry about changing pads. The HP Plus will provide a very noticeable increase in brake torque and temperature range when compared to OEM pads. Usually recommended to beginners who have very little to no track experience and are looking for an upgrade over stock.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cul\u003e \u003cli\u003eLow to Mid Temperature Range\u003c\/li\u003e \u003cli\u003eFade Resistant\u003c\/li\u003e \u003cli\u003eSmooth, Predictable Torque\u003c\/li\u003e \u003cli\u003eIdeal for Autocross\u003c\/li\u003e \u003cli\u003e100-800 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e300-600 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e \u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e \u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e \u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e \u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764400116042,"sku":"HWK-HB289N.610","price":240.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-hp-plus-road-and-track-brake-pads-front-hb289n-610-974.webp?v=1784499480"},{"product_id":"hawk-performance-er-1-motorsports-brake-pads-rear-hb906d-634","title":"HAWK Performance ER-1 Motorsports Brake Pads Rear - HB906D.634","description":"\u003cp\u003eER-1 has been developed by Hawk Performance for the endurance racing market with a simple goal; offer a higher coefficient of friction than competing endurance pads while maintaining matched or improved lifespan. Years of testing across America’s most prestigious races has resulted in a well-rounded compound that offers ideal modulation and pedal communication, with ground breaking friction stability across a thermal range as high as 1,600°F. This consistency of performance, hour after hour, makes it ideal for not only endurance racing, but HPDE, track days, time trials and even sprint racing.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSuperior Pad \u0026amp; Rotor wear\u003c\/li\u003e \u003cli\u003eConsistent medium-to-high friction\u003c\/li\u003e \u003cli\u003eSpecific emphasis on modulation, release and pedal communication\u003c\/li\u003e \u003cli\u003eIdeal for light-to-medium weight vehicles in HPDE, Track Day events, Time Trials, or Endurance Racing\u003c\/li\u003e \u003cli\u003eHigher coefficient of friction than competing endurance pads, wtih matched or improved lifespan\u003c\/li\u003e \u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors\u003c\/li\u003e \u003cli\u003eMedium to High torque\u003c\/li\u003e \u003cli\u003e400-1600 F operating temperatures\u003c\/li\u003e \u003cli\u003e700-1100 F optimal temperatures\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764400148810,"sku":"HWK-HB906D.634","price":445.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-er-1-motorsports-brake-pads-rear-hb906d-634-770.webp?v=1784499480"},{"product_id":"hawk-performance-er-1-motorsports-brake-pads-rear-hb290d-583","title":"HAWK Performance ER-1 Motorsports Brake Pads Rear - HB290D.583","description":"\u003cp\u003eER-1 has been developed by Hawk Performance for the endurance racing market with a simple goal; offer a higher coefficient of friction than competing endurance pads while maintaining matched or improved lifespan. Years of testing across America’s most prestigious races has resulted in a well-rounded compound that offers ideal modulation and pedal communication, with ground breaking friction stability across a thermal range as high as 1,600°F. This consistency of performance, hour after hour, makes it ideal for not only endurance racing, but HPDE, track days, time trials and even sprint racing.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSuperior Pad \u0026amp; Rotor wear\u003c\/li\u003e \u003cli\u003eConsistent medium-to-high friction\u003c\/li\u003e \u003cli\u003eSpecific emphasis on modulation, release and pedal communication\u003c\/li\u003e \u003cli\u003eIdeal for light-to-medium weight vehicles in HPDE, Track Day events, Time Trials, or Endurance Racing\u003c\/li\u003e \u003cli\u003eHigher coefficient of friction than competing endurance pads, wtih matched or improved lifespan\u003c\/li\u003e \u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors\u003c\/li\u003e \u003cli\u003eMedium to High torque\u003c\/li\u003e \u003cli\u003e400-1600 F operating temperatures\u003c\/li\u003e \u003cli\u003e700-1100 F optimal temperatures\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764400181578,"sku":"HWK-HB290D.583","price":383.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-er-1-motorsports-brake-pads-rear-hb290d-583-540.webp?v=1784499481"},{"product_id":"hawk-performance-er-1-motorsports-brake-pads-rear-hb290d-606","title":"HAWK Performance ER-1 Motorsports Brake Pads Rear - HB290D.606","description":"\u003cp\u003eER-1 has been developed by Hawk Performance for the endurance racing market with a simple goal; offer a higher coefficient of friction than competing endurance pads while maintaining matched or improved lifespan. Years of testing across America’s most prestigious races has resulted in a well-rounded compound that offers ideal modulation and pedal communication, with ground breaking friction stability across a thermal range as high as 1,600°F. This consistency of performance, hour after hour, makes it ideal for not only endurance racing, but HPDE, track days, time trials and even sprint racing.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSuperior Pad \u0026amp; Rotor wear\u003c\/li\u003e \u003cli\u003eConsistent medium-to-high friction\u003c\/li\u003e \u003cli\u003eSpecific emphasis on modulation, release and pedal communication\u003c\/li\u003e \u003cli\u003eIdeal for light-to-medium weight vehicles in HPDE, Track Day events, Time Trials, or Endurance Racing\u003c\/li\u003e \u003cli\u003eHigher coefficient of friction than competing endurance pads, wtih matched or improved lifespan\u003c\/li\u003e \u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors\u003c\/li\u003e \u003cli\u003eMedium to High torque\u003c\/li\u003e \u003cli\u003e400-1600 F operating temperatures\u003c\/li\u003e \u003cli\u003e700-1100 F optimal temperatures\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764400214346,"sku":"HWK-HB290D.606","price":354.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-er-1-motorsports-brake-pads-rear-hb290d-606-957.webp?v=1784499482"},{"product_id":"hawk-performance-er-1-motorsports-brake-pads-front-hb664d-634","title":"HAWK Performance ER-1 Motorsports Brake Pads Front - HB664D.634","description":"\u003cp\u003eER-1 has been developed by Hawk Performance for the endurance racing market with a simple goal; offer a higher coefficient of friction than competing endurance pads while maintaining matched or improved lifespan. Years of testing across America’s most prestigious races has resulted in a well-rounded compound that offers ideal modulation and pedal communication, with ground breaking friction stability across a thermal range as high as 1,600°F. This consistency of performance, hour after hour, makes it ideal for not only endurance racing, but HPDE, track days, time trials and even sprint racing.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSuperior Pad \u0026amp; Rotor wear\u003c\/li\u003e \u003cli\u003eConsistent medium-to-high friction\u003c\/li\u003e \u003cli\u003eSpecific emphasis on modulation, release and pedal communication\u003c\/li\u003e \u003cli\u003eIdeal for light-to-medium weight vehicles in HPDE, Track Day events, Time Trials, or Endurance Racing\u003c\/li\u003e \u003cli\u003eHigher coefficient of friction than competing endurance pads, wtih matched or improved lifespan\u003c\/li\u003e \u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors\u003c\/li\u003e \u003cli\u003eMedium to High torque\u003c\/li\u003e \u003cli\u003e400-1600 F operating temperatures\u003c\/li\u003e \u003cli\u003e700-1100 F optimal temperatures\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764400247114,"sku":"HWK-HB664D.634","price":373.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-er-1-motorsports-brake-pads-front-hb664d-634-726.webp?v=1784499483"},{"product_id":"hawk-performance-er-1-motorsports-brake-pads-front-hb550d-634","title":"HAWK Performance ER-1 Motorsports Brake Pads Front - HB550D.634","description":"\u003cp\u003eER-1 has been developed by Hawk Performance for the endurance racing market with a simple goal; offer a higher coefficient of friction than competing endurance pads while maintaining matched or improved lifespan. Years of testing across America’s most prestigious races has resulted in a well-rounded compound that offers ideal modulation and pedal communication, with ground breaking friction stability across a thermal range as high as 1,600°F. This consistency of performance, hour after hour, makes it ideal for not only endurance racing, but HPDE, track days, time trials and even sprint racing.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSuperior Pad \u0026amp; Rotor wear\u003c\/li\u003e \u003cli\u003eConsistent medium-to-high friction\u003c\/li\u003e \u003cli\u003eSpecific emphasis on modulation, release and pedal communication\u003c\/li\u003e \u003cli\u003eIdeal for light-to-medium weight vehicles in HPDE, Track Day events, Time Trials, or Endurance Racing\u003c\/li\u003e \u003cli\u003eHigher coefficient of friction than competing endurance pads, wtih matched or improved lifespan\u003c\/li\u003e \u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors\u003c\/li\u003e \u003cli\u003eMedium to High torque\u003c\/li\u003e \u003cli\u003e400-1600 F operating temperatures\u003c\/li\u003e \u003cli\u003e700-1100 F optimal temperatures\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764400279882,"sku":"HWK-HB550D.634","price":437.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-er-1-motorsports-brake-pads-front-hb550d-634-755.webp?v=1784499484"},{"product_id":"hawk-performance-er-1-motorsports-brake-pads-front-hb289d-610","title":"HAWK Performance ER-1 Motorsports Brake Pads Front - HB289D.610","description":"\u003cp\u003eER-1 has been developed by Hawk Performance for the endurance racing market with a simple goal; offer a higher coefficient of friction than competing endurance pads while maintaining matched or improved lifespan. Years of testing across America’s most prestigious races has resulted in a well-rounded compound that offers ideal modulation and pedal communication, with ground breaking friction stability across a thermal range as high as 1,600°F. This consistency of performance, hour after hour, makes it ideal for not only endurance racing, but HPDE, track days, time trials and even sprint racing.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSuperior Pad \u0026amp; Rotor wear\u003c\/li\u003e \u003cli\u003eConsistent medium-to-high friction\u003c\/li\u003e \u003cli\u003eSpecific emphasis on modulation, release and pedal communication\u003c\/li\u003e \u003cli\u003eIdeal for light-to-medium weight vehicles in HPDE, Track Day events, Time Trials, or Endurance Racing\u003c\/li\u003e \u003cli\u003eHigher coefficient of friction than competing endurance pads, wtih matched or improved lifespan\u003c\/li\u003e \u003cli\u003eAll Hawk Performance compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron\/Metal rotors\u003c\/li\u003e \u003cli\u003eMedium to High torque\u003c\/li\u003e \u003cli\u003e400-1600 F operating temperatures\u003c\/li\u003e \u003cli\u003e700-1100 F optimal temperatures\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764400345418,"sku":"HWK-HB289D.610","price":395.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-er-1-motorsports-brake-pads-front-hb289d-610-140.webp?v=1784499485"},{"product_id":"hawk-performance-dtc-80-motorsports-brake-pads-front-hb550q-634","title":"HAWK Performance DTC-80 Motorsports Brake Pads Front - HB550Q.634","description":"\u003cdiv\u003e \u003cdiv\u003e \u003cp\u003eHawk Performance products have dominated motorsports for more than 25 years, and this revolutionary compound is taking that domination to a new level. Intended for the hardest braking circuits where the most demanding brake products are required, Hawk DTC-80 is a compound engineered for use on all circle track and road racing venues where a high torque, high temperature-resilient friction material is a must. With a formulated flat coefficient of friction at high temperature levels, DTC-80 provides consistent performance corner after corner. Track tested and proven effective, this formulation offers lower wear rates and higher torque values than other competitive materials on the market today. The end results are better car control, more confident brake zone feel, and stunningly predictable performance.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eThe DTC-80 has a higher temperature and generates more brake torque than the DTC-70. If you have been over-heating the DTC-70 or it is not giving you the torque you need, give the DTC-80 a try.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cul\u003e \u003cli\u003eHigh Initial Bite\u003c\/li\u003e \u003cli\u003eHigh Torque\u003c\/li\u003e \u003cli\u003eConsistent Brake Torque over Temperature Range\u003c\/li\u003e \u003cli\u003eSuperior pad and Rotor Wear\u003c\/li\u003e \u003cli\u003eApplicable to NASCAR, NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2, Pro 4 Off Road Trucks, Pro Lite, Sports Car, GT, GS, Open Wheel, Formula, Monster Trucks\u003c\/li\u003e \u003cli\u003e500-1700 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e600-1500 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e \u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e \u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e li\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads\u003c\/ul\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764400476490,"sku":"HWK-HB550Q.634","price":431.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-dtc-80-motorsports-brake-pads-front-hb550q-634-125.webp?v=1784499486"},{"product_id":"hawk-performance-dtc-70-motorsports-brake-pads-rear-hb906u-634","title":"HAWK Performance DTC-70 Motorsports Brake Pads Rear - HB906U.634","description":"\u003cdiv\u003e \u003cdiv\u003e \u003cp\u003eThe Hawk DTC-70 race compound was engineered with extremely high torque and highly aggressive initial bite for cars with high deceleration rates, with or without downforce. With superior release and control characteristics, it's a winning race solution on its own or as split friction with DTC-60.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eDTC-70 is more aggressive than the DTC-60 but has the same temperature range. Many racers of Corvettes, Mustangs, Porsches, BMWs and other specialty race cars choose to run DTC-70 Front and DTC-60 rear. This is not an entry level race compound and should not be driven on the street. Use when you are a serious racer with track experience and have had issues with less aggressive compounds overheating or not providing enough bite.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cul\u003e \u003cli\u003eHigh Performance\u003c\/li\u003e \u003cli\u003eHigh Torque\u003c\/li\u003e \u003cli\u003eSuperior Rotor and Pad Wear\u003c\/li\u003e \u003cli\u003eExcellent Modulation and Release Characteristics\u003c\/li\u003e \u003cli\u003eApplicable to NASCAR, NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2, Pro 4 Off Road Trucks, Pro Lite, Sports Car, GT, GS, Open Wheel, Formula, Monster Trucks\u003c\/li\u003e \u003cli\u003eStable Friction Output\u003c\/li\u003e \u003cli\u003e400-1600 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e600-1200 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e \u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e \u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e li\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads \u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764400509258,"sku":"HWK-HB906U.634","price":404.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-dtc-70-motorsports-brake-pads-rear-hb906u-634-569.webp?v=1784499487"},{"product_id":"hawk-performance-dtc-70-motorsports-brake-pads-rear-hb290u-606","title":"HAWK Performance DTC-70 Motorsports Brake Pads Rear - HB290U.606","description":"\u003cdiv\u003e \u003cdiv\u003e \u003cp\u003eThe Hawk DTC-70 race compound was engineered with extremely high torque and highly aggressive initial bite for cars with high deceleration rates, with or without downforce. With superior release and control characteristics, it's a winning race solution on its own or as split friction with DTC-60.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eDTC-70 is more aggressive than the DTC-60 but has the same temperature range. Many racers of Corvettes, Mustangs, Porsches, BMWs and other specialty race cars choose to run DTC-70 Front and DTC-60 rear. This is not an entry level race compound and should not be driven on the street. Use when you are a serious racer with track experience and have had issues with less aggressive compounds overheating or not providing enough bite.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cul\u003e \u003cli\u003eHigh Performance\u003c\/li\u003e \u003cli\u003eHigh Torque\u003c\/li\u003e \u003cli\u003eSuperior Rotor and Pad Wear\u003c\/li\u003e \u003cli\u003eExcellent Modulation and Release Characteristics\u003c\/li\u003e \u003cli\u003eApplicable to NASCAR, NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2, Pro 4 Off Road Trucks, Pro Lite, Sports Car, GT, GS, Open Wheel, Formula, Monster Trucks\u003c\/li\u003e \u003cli\u003eStable Friction Output\u003c\/li\u003e \u003cli\u003e400-1600 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e600-1200 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e \u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e \u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e li\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads \u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764400574794,"sku":"HWK-HB290U.606","price":388.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-dtc-70-motorsports-brake-pads-rear-hb290u-606-865.webp?v=1784499487"},{"product_id":"hawk-performance-dtc-70-motorsports-brake-pads-front-hb664u-634","title":"HAWK Performance DTC-70 Motorsports Brake Pads Front - HB664U.634","description":"\u003cdiv\u003e \u003cdiv\u003e \u003cp\u003eThe Hawk DTC-70 race compound was engineered with extremely high torque and highly aggressive initial bite for cars with high deceleration rates, with or without downforce. With superior release and control characteristics, it's a winning race solution on its own or as split friction with DTC-60.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eDTC-70 is more aggressive than the DTC-60 but has the same temperature range. Many racers of Corvettes, Mustangs, Porsches, BMWs and other specialty race cars choose to run DTC-70 Front and DTC-60 rear. This is not an entry level race compound and should not be driven on the street. Use when you are a serious racer with track experience and have had issues with less aggressive compounds overheating or not providing enough bite.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cul\u003e \u003cli\u003eHigh Performance\u003c\/li\u003e \u003cli\u003eHigh Torque\u003c\/li\u003e \u003cli\u003eSuperior Rotor and Pad Wear\u003c\/li\u003e \u003cli\u003eExcellent Modulation and Release Characteristics\u003c\/li\u003e \u003cli\u003eApplicable to NASCAR, NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2, Pro 4 Off Road Trucks, Pro Lite, Sports Car, GT, GS, Open Wheel, Formula, Monster Trucks\u003c\/li\u003e \u003cli\u003eStable Friction Output\u003c\/li\u003e \u003cli\u003e400-1600 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e600-1200 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e \u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e \u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e li\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads \u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764400607562,"sku":"HWK-HB664U.634","price":385.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-dtc-70-motorsports-brake-pads-front-hb664u-634-326.webp?v=1784499489"},{"product_id":"hawk-performance-dtc-70-motorsports-brake-pads-front-hb550u-634","title":"HAWK Performance DTC-70 Motorsports Brake Pads Front - HB550U.634","description":"\u003cdiv\u003e \u003cdiv\u003e \u003cp\u003eThe Hawk DTC-70 race compound was engineered with extremely high torque and highly aggressive initial bite for cars with high deceleration rates, with or without downforce. With superior release and control characteristics, it's a winning race solution on its own or as split friction with DTC-60.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eDTC-70 is more aggressive than the DTC-60 but has the same temperature range. Many racers of Corvettes, Mustangs, Porsches, BMWs and other specialty race cars choose to run DTC-70 Front and DTC-60 rear. This is not an entry level race compound and should not be driven on the street. Use when you are a serious racer with track experience and have had issues with less aggressive compounds overheating or not providing enough bite.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cul\u003e \u003cli\u003eHigh Performance\u003c\/li\u003e \u003cli\u003eHigh Torque\u003c\/li\u003e \u003cli\u003eSuperior Rotor and Pad Wear\u003c\/li\u003e \u003cli\u003eExcellent Modulation and Release Characteristics\u003c\/li\u003e \u003cli\u003eApplicable to NASCAR, NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2, Pro 4 Off Road Trucks, Pro Lite, Sports Car, GT, GS, Open Wheel, Formula, Monster Trucks\u003c\/li\u003e \u003cli\u003eStable Friction Output\u003c\/li\u003e \u003cli\u003e400-1600 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e600-1200 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e \u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e \u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e li\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads \u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764400673098,"sku":"HWK-HB550U.634","price":439.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-dtc-70-motorsports-brake-pads-front-hb550u-634-642.webp?v=1784499490"},{"product_id":"hawk-performance-dtc-60-motorsports-brake-pads-rear-hb906g-634","title":"HAWK Performance DTC-60 Motorsports Brake Pads Rear - HB906G.634","description":"\u003cdiv\u003e \u003cdiv\u003e \u003cp\u003eRunning with extremely high deceleration rates and increased downforce poses different challenges, so Hawk designed DTC-60 race compound. Recommended with DTC-70 when split friction between axles is desired, it has excellent modulation and release characteristics.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eDTC-60 has the same temperature range as DTC-70, but produces less brake torque. Many racers of lighter, smaller cars such as the Miata and S2000 will run DTC-60 Front and DTC-30 Rear. On larger, heavier, cars such as Corvettes, Mustangs, Porsches, BMWs and other specialty race cars, the DTC-60 is run on the rear with DTC-70 up front. This is not an entry level race compound and should not be driven on the street. Use when you are a serious racer with track experience and have had issues with less aggressive compounds overheating or not providing enough bite.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cul\u003e \u003cli\u003eSuperior Release and Torque Control\u003c\/li\u003e \u003cli\u003eVery Low Pad and Rotor Wear\u003c\/li\u003e \u003cli\u003eHigh Torque\u003c\/li\u003e \u003cli\u003eExcellent Modulation and Release Characteristics\u003c\/li\u003e \u003cli\u003eApplicable to NASCAR, NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2, Pro 4 Off Road Trucks, Pro Lite, Sports Car, GT, GS, Open Wheel, Formula, Monster Trucks\u003c\/li\u003e \u003cli\u003eStable Friction Output\u003c\/li\u003e \u003cli\u003e400-1600 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e600-1200 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e \u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e \u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e li\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads\u003c\/ul\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764400705866,"sku":"HWK-HB906G.634","price":356.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-dtc-60-motorsports-brake-pads-rear-hb906g-634-404.webp?v=1784499490"},{"product_id":"hawk-performance-dtc-60-motorsports-brake-pads-front-hb664g-634","title":"HAWK Performance DTC-60 Motorsports Brake Pads Front - HB664G.634","description":"\u003cdiv\u003e \u003cdiv\u003e \u003cp\u003eRunning with extremely high deceleration rates and increased downforce poses different challenges, so Hawk designed DTC-60 race compound. Recommended with DTC-70 when split friction between axles is desired, it has excellent modulation and release characteristics.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eDTC-60 has the same temperature range as DTC-70, but produces less brake torque. Many racers of lighter, smaller cars such as the Miata and S2000 will run DTC-60 Front and DTC-30 Rear. On larger, heavier, cars such as Corvettes, Mustangs, Porsches, BMWs and other specialty race cars, the DTC-60 is run on the rear with DTC-70 up front. This is not an entry level race compound and should not be driven on the street. Use when you are a serious racer with track experience and have had issues with less aggressive compounds overheating or not providing enough bite.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cul\u003e \u003cli\u003eSuperior Release and Torque Control\u003c\/li\u003e \u003cli\u003eVery Low Pad and Rotor Wear\u003c\/li\u003e \u003cli\u003eHigh Torque\u003c\/li\u003e \u003cli\u003eExcellent Modulation and Release Characteristics\u003c\/li\u003e \u003cli\u003eApplicable to NASCAR, NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2, Pro 4 Off Road Trucks, Pro Lite, Sports Car, GT, GS, Open Wheel, Formula, Monster Trucks\u003c\/li\u003e \u003cli\u003eStable Friction Output\u003c\/li\u003e \u003cli\u003e400-1600 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e600-1200 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e \u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e \u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e li\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads\u003c\/ul\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764400804170,"sku":"HWK-HB664G.634","price":360.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-dtc-60-motorsports-brake-pads-front-hb664g-634-111.webp?v=1784499491"},{"product_id":"hawk-performance-dtc-60-motorsports-brake-pads-front-hb550g-634","title":"HAWK Performance DTC-60 Motorsports Brake Pads Front - HB550G.634","description":"\u003cdiv\u003e \u003cdiv\u003e \u003cp\u003eRunning with extremely high deceleration rates and increased downforce poses different challenges, so Hawk designed DTC-60 race compound. Recommended with DTC-70 when split friction between axles is desired, it has excellent modulation and release characteristics.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eDTC-60 has the same temperature range as DTC-70, but produces less brake torque. Many racers of lighter, smaller cars such as the Miata and S2000 will run DTC-60 Front and DTC-30 Rear. On larger, heavier, cars such as Corvettes, Mustangs, Porsches, BMWs and other specialty race cars, the DTC-60 is run on the rear with DTC-70 up front. This is not an entry level race compound and should not be driven on the street. Use when you are a serious racer with track experience and have had issues with less aggressive compounds overheating or not providing enough bite.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cul\u003e \u003cli\u003eSuperior Release and Torque Control\u003c\/li\u003e \u003cli\u003eVery Low Pad and Rotor Wear\u003c\/li\u003e \u003cli\u003eHigh Torque\u003c\/li\u003e \u003cli\u003eExcellent Modulation and Release Characteristics\u003c\/li\u003e \u003cli\u003eApplicable to NASCAR, NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2, Pro 4 Off Road Trucks, Pro Lite, Sports Car, GT, GS, Open Wheel, Formula, Monster Trucks\u003c\/li\u003e \u003cli\u003eStable Friction Output\u003c\/li\u003e \u003cli\u003e400-1600 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e600-1200 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e \u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e \u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e li\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads\u003c\/ul\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764400836938,"sku":"HWK-HB550G.634","price":529.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-dtc-60-motorsports-brake-pads-front-hb550g-634-483.webp?v=1784499493"},{"product_id":"hawk-performance-dtc-60-motorsports-brake-pads-front-hb289g-610","title":"HAWK Performance DTC-60 Motorsports Brake Pads Front - HB289G.610","description":"\u003cdiv\u003e \u003cdiv\u003e \u003cp\u003eRunning with extremely high deceleration rates and increased downforce poses different challenges, so Hawk designed DTC-60 race compound. Recommended with DTC-70 when split friction between axles is desired, it has excellent modulation and release characteristics.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eDTC-60 has the same temperature range as DTC-70, but produces less brake torque. Many racers of lighter, smaller cars such as the Miata and S2000 will run DTC-60 Front and DTC-30 Rear. On larger, heavier, cars such as Corvettes, Mustangs, Porsches, BMWs and other specialty race cars, the DTC-60 is run on the rear with DTC-70 up front. This is not an entry level race compound and should not be driven on the street. Use when you are a serious racer with track experience and have had issues with less aggressive compounds overheating or not providing enough bite.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cul\u003e \u003cli\u003eSuperior Release and Torque Control\u003c\/li\u003e \u003cli\u003eVery Low Pad and Rotor Wear\u003c\/li\u003e \u003cli\u003eHigh Torque\u003c\/li\u003e \u003cli\u003eExcellent Modulation and Release Characteristics\u003c\/li\u003e \u003cli\u003eApplicable to NASCAR, NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2, Pro 4 Off Road Trucks, Pro Lite, Sports Car, GT, GS, Open Wheel, Formula, Monster Trucks\u003c\/li\u003e \u003cli\u003eStable Friction Output\u003c\/li\u003e \u003cli\u003e400-1600 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e600-1200 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e \u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e \u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e li\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads\u003c\/ul\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764400869706,"sku":"HWK-HB289G.610","price":363.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-dtc-60-motorsports-brake-pads-front-hb289g-610-487.webp?v=1784499494"},{"product_id":"hawk-performance-dtc-30-motorsports-brake-pads-rear-hb906w-634","title":"HAWK Performance DTC-30 Motorsports Brake Pads Rear - HB906W.634","description":"\u003cdiv\u003e \u003cp\u003eDTC-30 is a controllable torque, multi-purpose compound, proven effective in a range of series. It delivers superior release characteristics and smooth pedal feel and initial bite for dirt and circle tracks, NASCAR modified, drag racing, trophy trucks, pro buggies, and more.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eIn addition to the applications mentioned above, the DTC-30 compound is often used on the rear axle of smaller race vehicles. Competitive racers of the Miata or S2000 will often choose DTC-30 for the rear axle paired with DTC-60 on the front. DTC-30 will also find itself on both axles of street driven vehicles when braking performance is top priority and owner is willing to sacrifice cleanliness and lack of brake noise.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cul\u003e \u003cli\u003eConsistent, Smooth Braking\u003c\/li\u003e \u003cli\u003eEffective when Cold\u003c\/li\u003e \u003cli\u003e100-1200 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e100-800 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e \u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e \u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e li\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads \u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764400902474,"sku":"HWK-HB906W.634","price":294.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-dtc-30-motorsports-brake-pads-rear-hb906w-634-345.webp?v=1784499494"},{"product_id":"hawk-performance-dtc-30-motorsports-brake-pads-rear-hb290w-606","title":"HAWK Performance DTC-30 Motorsports Brake Pads Rear - HB290W.606","description":"\u003cdiv\u003e \u003cp\u003eDTC-30 is a controllable torque, multi-purpose compound, proven effective in a range of series. It delivers superior release characteristics and smooth pedal feel and initial bite for dirt and circle tracks, NASCAR modified, drag racing, trophy trucks, pro buggies, and more.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eIn addition to the applications mentioned above, the DTC-30 compound is often used on the rear axle of smaller race vehicles. Competitive racers of the Miata or S2000 will often choose DTC-30 for the rear axle paired with DTC-60 on the front. DTC-30 will also find itself on both axles of street driven vehicles when braking performance is top priority and owner is willing to sacrifice cleanliness and lack of brake noise.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cul\u003e \u003cli\u003eConsistent, Smooth Braking\u003c\/li\u003e \u003cli\u003eEffective when Cold\u003c\/li\u003e \u003cli\u003e100-1200 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e100-800 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e \u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e \u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e li\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads \u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764400935242,"sku":"HWK-HB290W.606","price":291.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-dtc-30-motorsports-brake-pads-rear-hb290w-606-963.webp?v=1784499499"},{"product_id":"hawk-performance-dtc-30-motorsports-brake-pads-front-hb664w-634","title":"HAWK Performance DTC-30 Motorsports Brake Pads Front - HB664W.634","description":"\u003cdiv\u003e \u003cp\u003eDTC-30 is a controllable torque, multi-purpose compound, proven effective in a range of series. It delivers superior release characteristics and smooth pedal feel and initial bite for dirt and circle tracks, NASCAR modified, drag racing, trophy trucks, pro buggies, and more.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eIn addition to the applications mentioned above, the DTC-30 compound is often used on the rear axle of smaller race vehicles. Competitive racers of the Miata or S2000 will often choose DTC-30 for the rear axle paired with DTC-60 on the front. DTC-30 will also find itself on both axles of street driven vehicles when braking performance is top priority and owner is willing to sacrifice cleanliness and lack of brake noise.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cul\u003e \u003cli\u003eConsistent, Smooth Braking\u003c\/li\u003e \u003cli\u003eEffective when Cold\u003c\/li\u003e \u003cli\u003e100-1200 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e100-800 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e \u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e \u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e li\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads \u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764400968010,"sku":"HWK-HB664W.634","price":324.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-dtc-30-motorsports-brake-pads-front-hb664w-634-197.webp?v=1784499500"},{"product_id":"hawk-performance-dtc-30-motorsports-brake-pads-front-hb289w-610","title":"HAWK Performance DTC-30 Motorsports Brake Pads Front - HB289W.610","description":"\u003cdiv\u003e \u003cp\u003eDTC-30 is a controllable torque, multi-purpose compound, proven effective in a range of series. It delivers superior release characteristics and smooth pedal feel and initial bite for dirt and circle tracks, NASCAR modified, drag racing, trophy trucks, pro buggies, and more.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eIn addition to the applications mentioned above, the DTC-30 compound is often used on the rear axle of smaller race vehicles. Competitive racers of the Miata or S2000 will often choose DTC-30 for the rear axle paired with DTC-60 on the front. DTC-30 will also find itself on both axles of street driven vehicles when braking performance is top priority and owner is willing to sacrifice cleanliness and lack of brake noise.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cul\u003e \u003cli\u003eConsistent, Smooth Braking\u003c\/li\u003e \u003cli\u003eEffective when Cold\u003c\/li\u003e \u003cli\u003e100-1200 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e100-800 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eFor motorsport use only. Image is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e \u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e \u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e li\u0026gt;Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads \u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764401000778,"sku":"HWK-HB289W.610","price":283.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-dtc-30-motorsports-brake-pads-front-hb289w-610-721.webp?v=1784499500"},{"product_id":"hawk-performance-blue-9012-motorsports-brake-pads-rear-hb290e-606","title":"HAWK Performance Blue 9012 Motorsports Brake Pads Rear - HB290E.606","description":"\u003cdiv\u003e \u003cp\u003eDesigned as an entry level endurance compound, there's nothing second-string about Hawk's Blue 9012 race compound. Easier to bed in and delivering excellent pad and rotor life, Blue 9012 is a medium torque pad developed specifically for Road, Rally and Circle Track racing.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cul\u003e \u003cli\u003eEndurance Compound\u003c\/li\u003e \u003cli\u003eMedium Friction\u003c\/li\u003e \u003cli\u003eIntermediate Initial Bite\u003c\/li\u003e \u003cli\u003eIncreased Mid-Mu Characteristics\u003c\/li\u003e \u003cli\u003e250-1000 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e350-800 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e \u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e \u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e \u003c\/ul\u003e\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764401033546,"sku":"HWK-HB290E.606","price":285.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-blue-9012-motorsports-brake-pads-rear-hb290e-606-169.webp?v=1784499501"},{"product_id":"hawk-performance-blue-9012-motorsports-brake-pads-front-hb550e-634","title":"HAWK Performance Blue 9012 Motorsports Brake Pads Front - HB550E.634","description":"\u003cdiv\u003e \u003cp\u003eDesigned as an entry level endurance compound, there's nothing second-string about Hawk's Blue 9012 race compound. Easier to bed in and delivering excellent pad and rotor life, Blue 9012 is a medium torque pad developed specifically for Road, Rally and Circle Track racing.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cul\u003e \u003cli\u003eEndurance Compound\u003c\/li\u003e \u003cli\u003eMedium Friction\u003c\/li\u003e \u003cli\u003eIntermediate Initial Bite\u003c\/li\u003e \u003cli\u003eIncreased Mid-Mu Characteristics\u003c\/li\u003e \u003cli\u003e250-1000 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e350-800 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e \u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e \u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e \u003c\/ul\u003e\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764401066314,"sku":"HWK-HB550E.634","price":303.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-blue-9012-motorsports-brake-pads-front-hb550e-634-842.webp?v=1784499502"},{"product_id":"hawk-performance-blue-9012-motorsports-brake-pads-front-hb289e-610","title":"HAWK Performance Blue 9012 Motorsports Brake Pads Front - HB289E.610","description":"\u003cdiv\u003e \u003cp\u003eDesigned as an entry level endurance compound, there's nothing second-string about Hawk's Blue 9012 race compound. Easier to bed in and delivering excellent pad and rotor life, Blue 9012 is a medium torque pad developed specifically for Road, Rally and Circle Track racing.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cul\u003e \u003cli\u003eEndurance Compound\u003c\/li\u003e \u003cli\u003eMedium Friction\u003c\/li\u003e \u003cli\u003eIntermediate Initial Bite\u003c\/li\u003e \u003cli\u003eIncreased Mid-Mu Characteristics\u003c\/li\u003e \u003cli\u003e250-1000 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e350-800 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Motorsports Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAfter reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.\u003c\/li\u003e \u003cli\u003eAt higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.\u003c\/li\u003e \u003cli\u003eAt or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.\u003c\/li\u003e \u003cli\u003eDo not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.\u003c\/li\u003e \u003cli\u003eIf during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eImportant Reminders when Burnishing or Bedding Brake Pads\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDo not attempt to use badly worn or damaged rotors with new brake pads.\u003c\/li\u003e \u003cli\u003eDo not drag brakes while car is moving during break-in procedure.\u003c\/li\u003e \u003cli\u003eDo not engage pedal while car is stopped at any time following the break-in procedure.\u003c\/li\u003e \u003cli\u003eUpon completing the procedure, allow the brake system to completely cool before racing.\u003c\/li\u003e \u003cli\u003eApplying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.\u003c\/li\u003e \u003cli\u003eClean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.\u003c\/li\u003e \u003cli\u003eSome forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.\u003c\/li\u003e \u003c\/ul\u003e\u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62764401099082,"sku":"HWK-HB289E.610","price":311.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-blue-9012-motorsports-brake-pads-front-hb289e-610-977.webp?v=1784499503"},{"product_id":"zestek-racing-scx-steering-wheel-control-panel-porsche-987-997-2-991-1","title":"Zestek Racing SCX Steering Wheel Control Panel Porsche 987 997.2 991.1","description":"\u003cp\u003eThe SCX is Zestek’s latest racing control hub for OEM ECU-equipped performance vehicles.\u003c\/p\u003e \u003cp\u003ePlease note that this product is compatible only with vehicles that use an OEM ECU. For CAN-equipped vehicles, please see our alternative options, the SCX-Pro and DRX.\u003c\/p\u003e \u003cp\u003eTaking the key success points from the first generation unit and incorporating customer feedback and in-house product innovation, the SCX is the ideal upgrade for the dual-duty motorsport build.\u003c\/p\u003e \u003cp\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=8l3cWv-c4Z8\" title=\"Zestek installation video\"\u003eClick here to watch our installation video\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003eKey Features\u003c\/p\u003e \u003cul\u003e \u003cli\u003e \u003cstrong\u003eFull OEM function support \u003c\/strong\u003e- Zestek’s proprietary communication chip is an independently installable OEM protocol adaptor which allows communication with almost all vehicles on the market.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eVeloLink Wireless System\u003c\/strong\u003e - Our proprietary VeloLink 2.4G protocol wireless system supports up to 6 wireless devices including OBD modules. Fully expandable with multiple VeloLink wireless accessories.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eWireless OBD and Feedback Lights\u003c\/strong\u003e - The integrated VeloLink OBD module includes multiple feedback lights to display real time vehicle status allowing your SCX to fully monitor and control your car.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eVeloLink Wireless Switches\u003c\/strong\u003e - Using VeloLink’s wireless switch modules you can support 16 fully customizable vehicle control switches. Supporting all functions such as exhaust valving, ESP, PTC etc. - all directly controlled from your SCX.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eCarbon Fiber Composite Material\u003c\/strong\u003e - The 50% carbon fiber composite front panel combines ideal physical properties and a performance aesthetic to provide excellent lightness and high rigidity.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003ePogo Pin Quick Release\u003c\/strong\u003e - This exclusive-to-Zestek quick release is CNC-machined for the perfect mechanical and digital connection.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eCustom Button System\u003c\/strong\u003e - Built specifically for Zestek, the dual-stage buttons on the panel are paired with 16.7 million colour RGB lighting for the ultimate tactile and visual experience.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eV2.0 Magnetic Paddles\u003c\/strong\u003e - The much-loved magnetic shifters from the first generation item have been reiterated for a new shifter mechanism that enables super crisp and responsive action. Durability-tested with over 1 million presses without failure.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eSteering Wheel Compatibility\u003c\/strong\u003e - The SCX is compatible with most 350mm and 330mm (clearance may be tight) aftermarket steering wheels, with a PCD of 6x70mm. For specific fitment guides please refer to our supporting documentation on the website.\u003c\/li\u003e \u003c\/ul\u003e \u003csection\u003e\u003c\/section\u003e \u003csection\u003e\u003c\/section\u003e \u003csection\u003e\u003c\/section\u003e","brand":"Zestek Racing","offers":[{"title":"No","offer_id":62765192380746,"sku":"ZTR-H002-PORSCHE-987","price":999.0,"currency_code":"GBP","in_stock":true},{"title":"Yes","offer_id":62765192413514,"sku":"ZTR-H002-PORSCHE-987-ZTR-HUB-023","price":1098.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/Zestek-SCX-1_2704f791-95b6-4d42-9bd2-929921a471bf.jpg?v=1784511207"},{"product_id":"hawk-performance-pc-performance-ceramic-street-brake-pads-front-hb483z-635","title":"HAWK Performance PC Performance Ceramic Street Brake Pads Front - HB483Z.635","description":"\u003cdiv\u003e \u003cdiv\u003e \u003cp\u003eHawk understands the needs of today's ceramic brake pad users and has specifically formulated our composite material to meet - and beat - the stringent low noise, ultra-low dust performance standards they have set. Engineered to reduce brake NVH (Noise, Vibration and Harshness),Hawk PC (Performance Ceramic) is a premium disc brake pad that delivers excellent performance mile after mile. Providing a linear friction profile that allows your vehicle's ABS system to operate most effectively, the unique compound has the advantage of never sacrificing power to achieve traditional ceramic pad attributes. With Hawk's PC, you can expect reduced brake pad wear, longer rotor life, and our quietest ride ever.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eThe Hawk PC (Performance Ceramic) is a great compound when your top priority is to minimize brake dust. This compound is a very popular replacement for OEM Brembo packages supplied on performance vehicles such as Corvettes, Mustangs, Challengers, Chargers, Subaru STI, and many others. If you are not looking to have increased brake performance over the stock level and want to virtually eliminate brake dust, the Hawk Performance Ceramic is what you are looking for.\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cul\u003e \u003cli\u003eExtremely Quite\u003c\/li\u003e \u003cli\u003eUltra-low Dust\u003c\/li\u003e \u003cli\u003eImproved Stopping Power\u003c\/li\u003e \u003cli\u003eGentle on rotors\u003c\/li\u003e \u003cli\u003eStable Friction Output\u003c\/li\u003e \u003cli\u003e100-650 Deg F Operating Temperature Range\u003c\/li\u003e \u003cli\u003e100-450 Deg F Optimal Temperature Range\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eImage is for illustative purposes, actual product may differ.\u003c\/p\u003e \u003ch3\u003eHawk Brake Pad Installation Procedure\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eInstall Brake pads properly. Be sure pads are securely positioned in the caliper.\u003c\/li\u003e \u003cli\u003eFlush system with fresh brake fluid.\u003c\/li\u003e \u003cli\u003eCheck all hydraulic parts for excess wear and tear.\u003c\/li\u003e \u003cli\u003eCheck disc for proper thickness, parallelism, and lateral run-out.\u003c\/li\u003e \u003cli\u003eCheck disc for scoring or grooves over .012\"\" depth. If either applies, resurfacing or replacement is required.\u003c\/li\u003e \u003cli\u003eIf disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid\u003c\/li\u003e \u003cli\u003eInspect calipers for freedom of movement. Lubricate where necessary\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eHawk Brake Pad Bedding Procedure - Street Compounds\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMake 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.\u003c\/li\u003e \u003cli\u003eMake an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.\u003c\/li\u003e \u003cli\u003eDO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)\u003c\/li\u003e \u003cli\u003eAllow 15 minutes or more for the brake system to cool down.\u003c\/li\u003e \u003cli\u003eYour new Hawk pads are ready for use.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eLimited Lifetime Warranty\u003c\/h3\u003e \u003cp\u003eCarlisle Brake \u0026amp; Friction (CBF) warrants Hawk Performance branded products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. CBF does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will CBF\/Hawk Performance be liable for incidental or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred. Any, and all, warranty claims must be processed through CBF. All valid warranty claims will be replaced and\/or reimbursed with Hawk Performance branded products of equal or greater value.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003e* Disclaimer to Limited Life-Time Warranty: Motorsports brake pads and rotors are developed for high performance events. Racing is a dangerous sport. Hawk Performance racing brake pads and rotors are sold without warranty expressed or implied. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk.\u003c\/strong\u003e\u003c\/p\u003e \u003c\/div\u003e","brand":"HAWK Performance","offers":[{"title":"Default Title","offer_id":62765206241610,"sku":"HWK-HB483Z.635","price":220.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1059\/6116\/1034\/files\/hawk-performance-pc-ceramic-street-brake-pads-front-hb483z-635-633.webp?v=1784511393"}],"url":"https:\/\/sansomsspecialistparts.co.uk\/collections\/boxster-987-05-12.oembed?page=8","provider":"Sansoms Specialist Parts","version":"1.0","type":"link"}