The Syvecs R8 Gen2 Kit represents a groundbreaking advancement in Engine Management (ECU) control for the latest generation Audi R8, offering the world’s first complete Standalone Engine Control Module. This comprehensive kit brings an array of advanced features to your vehicle, delivering unparalleled control and performance optimization. By simply plugging in the kit, you unlock a host of capabilities, including the following and more:

• Live Tuning: Enjoy real-time tuning of every aspect of the engine’s calibration, including signals sent to the Transmission Control Module (TCM) and 4WD system.

• Customizable Engine Maps: Select desired engine maps, boost levels, traction settings, and launch control levels through steering wheel controls.

• Adjustable Launch Control: Experience fully adjustable launch control with anti-lag strategies and ramp-in maps for optimized launch performance.

• Transmission Monitoring: Monitor clutch pressures, gearbox temperature, and main line pressure for enhanced control and safety.

• TCM DTC Clearing: Clear TCM Diagnostic Trouble Codes (DTCs) directly from the Syvecs Suite.

• Variable Valve Timing Control: Take complete control over the variable valve timing system to fine-tune engine performance.

• Closed Loop Dual Lambda Control: Utilize OEM lambdas for precise closed-loop dual lambda control and optimal air-fuel ratios.

• Flex Fuel Control: Benefit from flex fuel control to run different ethanol blends and optimize performance accordingly.

• Cruise Control Add-On: Add cruise control functionality to your vehicle for enhanced convenience.

• Injector Control: Control both the OEM Direct Injectors and up to 10 additional port injectors for high-power applications.

• Closed Loop Boost Control: Fine-tune closed-loop boost control with launch level adjustments and trims for various parameters.

• Exhaust Gas Temperature Monitoring: Monitor and trim exhaust gas temperatures for enhanced engine safety and performance.

• Built-In Data Logging: Utilize built-in data logging with market-leading analysis software for up to 8 hours of data recording at data rates up to 1000Hz.

• Rolling Antilag / Pit Lane Limiter Strategies: Implement rolling antilag strategies for building boost on a roll, ideal for performance driving.

• Anti-Theft and Valet Modes: Protect your vehicle with anti-theft and valet modes.

• Remote Tuning: Establish a super-fast connection via the RJ45 Ethernet port for remote tuning from anywhere in the world, including on-track adjustments if connected to a wireless unit.

• Adjustable Traction Control: Fine-tune traction control strategies based on lateral g, steering angle, and individual wheel speed monitoring.

• Programmable Target Slip Maps: Select from 4 programmable target slip maps for immediate torque reduction via ignition retard or fuel cut.

• Engine Safety Trips: Configure engine safety trip parameters such as oil temperature and oil pressure to ensure engine protection.

• Fuel Pump Control: Control both main Direct Injection pumps and sub pumps, with relative fuel pressure monitoring and limiting.

• Pedal to Throttle Angle Maps: Customize 4 different pedal to throttle angle maps with multipliers based on parameters like speed.

• Individual Cylinder Knock Control: Customize individual cylinder closed-loop knock control, with adjustments for frequency, listening windows, and gains for each cylinder. Trigger full cylinder shutdown in severe knock conditions.

• Transmission Control: Adjust torque levels and demand sent to the DSG ECU for optimized clutch pressure and pull-away drivability.

• Torque Reduction Levels: Modify torque reduction levels on shifts, essential for high-power vehicles like Huracans with added torque from Twin Turbo Kits.

• Torque Ramp-In After Launch: Adjust torque ramp-in after launch for enhanced performance.

• Throttle Blip Requests: Change throttle blip requests to match your torque band, particularly useful for oversized turbo installations.

• High-Performance Compatibility: Run up to 7bar map sensors and control high or low impedance injectors for versatile performance tuning.

• External Sensor Compatibility: Fit any type of external sensor for monitoring and triggering safety trips, such as crank case pressure or damper position.

• DBW Throttle Body Compatibility: Utilize any size Drive-By-Wire (DBW) throttle body, such as Chevrolet LS7.

• Wet and Dry Nitrous Control: Control wet and dry nitrous systems, driving solenoids and N2O heaters via pressure monitoring.

• External Vehicle Feature Control: Control external vehicle features based on sensor inputs, like adjusting the rear wing based on G-forces or exhaust control valves.

• Dash and Display Compatibility: Connect any race series dash or partners’ Touchscreen CANBUS adjustment/display units.

• Live Input Viewing: View any input in real-time with the built-in scope, offering up to 1000Hz sampling rate.

The Syvecs R8 Gen2 Kit redefines Engine Management (ECU) control for the latest Audi R8 generation, empowering you with unprecedented customization, control, and performance optimization. Experience the future of Engine Management (ECU) with Syvecs’ revolutionary technology.